Barco Hdx Series Installation Manual

							7. Start up of the adjustment mode
7.2 About the use of the remote control and the local keypad
Overview
All navigations and adjustments can be done eitherwith the remote control or with the local keypad.
Almost all the keys on the remote control have an equivalent on the local keypad.
Exceptions:
• Direct adjustment keys such as Contrast, Brightness, Saturation, Phase, etc.
R5905032 HDX SERIES 23/11/2011
87 
						

							7. Start up of the adjustment mode
7.3 Start up the adjustment mode
Start up tools
To start up the adjustment mode, use the remote control or the local keypad.
How to start up?
1. PressMenuon the remote control (RCU) or on the local keypad to start up theAdjustmentmode.
The main menu of the adjustment mode opens.
Image 7-1
Main menu
88R5905032 HDX SERIES 23/11/2011 
						

							7. Start up of the adjustment mode
7.4 Navigation and adjustments
How to navigate in the menu structure?
Once in the menu structure, use the▲or▼key on the remote control or on the local keypad to scroll through the items in the
displayed menu. The selected item will get a background color. To activate a selected submenu or function, pressENTER.
When on a submenu, to return one step to the parent menu, pressEXIT.
To escape the menu structure when on a menu, pressMENU.
How to make an adjustment?
With the remote control or the local keypad navigate through the menu structure until the desired item is selected. Press the▲or
▼key until the desired item is reached. PressEXITtofinalize the adjustment.
With the local keypad or remote control, press the▲or▼key until the desired value (setup) is reached. PressEXITtofinalize the
adjustment.
Direct adjustment within the menu:
Image 7-2
Use the◄or►key to directly adjust the current value.
or,
Via bar scale adjustment :
Once an item is selected, pressENTERto open the bar scale menu.
Image 7-3
Contrast adjustment
Use the◄or►key to adjust the current value.
The bar scale will move accordingly.
PressEXITtofinalize the adjustment.
or,
When the bar scale is displayed, via direct input. PressENTERto activate the inputfield.
Image 7-4
Direct contrast adjustment
Enter the desired value with the digit keys. PressENTERto accept.
PressEXITtofinalize the adjustment.
R5905032 HDX SERIES 23/11/2011
89 
						

							7. Start up of the adjustment mode
7.5 Menu memory
Overview
Each menu with sub menus, remembers its last selected sub item even when leaving the menu structure and that as long as the
projector is running. When restarting the projector from stand-by, the menu memory is reset.
After re-opening the main menu and selecting an item, the previous selected sub item of that selected item is highlighted and can
be opened just by pressingENTER.
90
R5905032 HDX SERIES 23/11/2011 
						

							7. Start up of the adjustment mode
7.6 Shortcut keys to the menus
About a shortcut key
The digit keys 5 to 9 can be customer programmed to directly open a pre-stored menu. That menu can be any independent menu
out of the list of menus. A menu which is built up by the content of a previous menu cannot be stored behind a shortcut.
How to use a shortcut key
While in the operational mode, no menu selected, just press on the desired digit key to open the menu behind that shortcut key.
How to create a shortcut key
Scroll to the desired menu. Press the digit key behind which the menu must be stored for 5 seconds. When the creation is success-
fully, a confirmation message appears on the screen. E.g. :
Image 7-5
SelectYesto confirm the creation.
To erase the shortcut, navigate toProjector Control→Buttons.
R5905032 HDX SERIES 23/11/201191 
						

							7. Start up of the adjustment mode
7.7 Test patterns in adjustment mode
Overview
When the adjustment mode is started, a test pattern can be called at any moment just by pressing thePatternkey on the RCU or the
local key path. Press as many times on thePatternkey as necessary to display the desired test pattern. The test pattern remains
on the screen as long as the adjustment mode is selected, even when selecting other menus. When leaving the adjustment mode,
the selected test pattern is cleared and the normal image is displayed again.
92
R5905032 HDX SERIES 23/11/2011 
						

							7. Start up of the adjustment mode
7.8 Help information in adjustment mode
Overview
For many items in the adjustment mode, help information is available. When on an item, just click on the info button of your remote
control to display information about the selected item.
When no information is available for the selected item, the messageNo help available for this itemis displayed.
To return to the adjustment mode, pressEXIT.
R5905032 HDX SERIES 23/11/2011
93 
						

							7. Start up of the adjustment mode
94R5905032 HDX SERIES 23/11/2011 
						

							8. Input
8. INPUT
Overview
• Input menu overview
• Slot Module Type
• Input locking
• Native resolution
• No Signal
R5905032 HDX SERIES 23/11/2011
95 
						

							8. Input
8.1 Input menu overview
Overview table
Level 1 Level 2 Level 3 Level 4
Input
Slot Module Type DVI/RGBDVI
DVI Dual link
RGB HS-VS
YUV HS-VS
SDI (SD/HD/3G/Dual)Input 1 Priority
Input 2 Priority
Input 1
Input 2
DUAL SDI
Input Locking Input on Main Window
Input on Pip Window
Input 1
Input 2
Input 3
Input 4
Free Run
Free Run Options
Native Resolution [On/Off]
No Signal Color [black/blue]
Logo [On/Off]
Shutdown [Off/On]
Shutdown time
Auto dimming [On/Off]
96
R5905032 HDX SERIES 23/11/2011