Barco Hdx Series Installation Manual

							10. Layout
Image 10-29
PiP window, size
2. PressENTERto select.
TheSizewindow opens.
Image 10-30
PiP window, resize
3. To keep the current aspect ratio, pressENTERto checkLock.
Once Lock is checked, the width and the height will follow each other when changing one of the dimensions.
4. Use the▲or▼key to change the height and the◄or►key to change the width.
5. When the desired size is reached, pressEXIT.
ASave Layoutwindow opens.
Image 10-31
Save layout
6. Use the▲or▼key to selectYe sand pressENTERto save.
SelectNoif you want to quit without saving the current position.
R5905032 HDX SERIES 23/11/2011
167 
						

							10. Layout
10.4.5 PiP window, position
What can be done?
The picture in picture window can be positioned on any place on the display just by changing its start coordinates. The reference is
the upper left corner of the window.
How to position
1. PressMenuto activate the menus and selectLayout→PiP window→Position.
Image 10-32
Main menu, layout
Image 10-33
Layout, PiP window
Image 10-34
PiP window, position
2. PressENTERto select.
ThePositionwindow opens.
Image 10-35
Position window
3. Use the▲or▼key to change theTo pposition and the◄or►key to change theLeftposition.
4. When desired position is reached, pressEXIT.
ASave Layoutwindow opens.
Image 10-36
Save layout
5. Use the▲or▼key to selectYe sand pressENTERto save.
SelectNoif you want to quit without saving the current position.
168
R5905032 HDX SERIES 23/11/2011 
						

							10. Layout
10.5 Layout File Services
Overview
• Load layoutfile
• Rename layoutfile
• Delete layoutfile
• Delete all layoutfiles
• Copy or Save as layoutfile
R5905032 HDX SERIES 23/11/2011
169 
						

							10. Layout
10.5.1 Load layoutfile
When loading a layout that requires two sources, the PiP window On/Off setting will be switched to On.
How to loadfile
1. PressMenuto activate the menus and selectLayout→Layout File Services→Load.
Image 10-37
Main menu, layout
Image 10-38
Layout, layoutfile services
Image 10-39
Layoutfile services, load
2. PressENTERto select.
TheLoad layoutoverview window opens.
Image 10-40
Load layoutfile list
3. Use the▲or▼key to select the desiredfile and pressENTERto activate.
The radio button in front of the selectedfile is checked.
170
R5905032 HDX SERIES 23/11/2011 
						

							10. Layout
10.5.2 Rename layoutfile
Only custom created layouts can be renamed.
How to rename
1. PressMenuto activate the menus and selectLayout→Layout File Services→Rename.
Image 10-41
Main menu, layout
Image 10-42
Layout, layoutfile services
Image 10-43
Layoutfile services, rename
2. PressENTERto select.
TheRename layoutwindow opens with all available custom layouts.
Image 10-44
3. Use the▲or▼key to select the desired customfile and pressENTERto start the renaming.
The Rename window opens.
Image 10-45
Rename layout
4. Use the▲or▼key to change the selected character.
Use the◄or►key to select another character.
Note:Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically. Arrow key left (◄) has the backspace functionality.
R5905032 HDX SERIES 23/11/2011
171 
						

							10. Layout
10.5.3 Delete layoutfile
Only custom created layouts can be deleted. The current selected custom layout cannot be deleted.
How to delete
1. PressMenuto activate the menus and selectLayout→Layout File Services→Delete.
Image 10-46
Main menu, layout
Image 10-47
Layout, layoutfile services
Image 10-48
Layoutfile services, delete
2. PressENTERto select.
TheDelete layoutwindow opens with all available custom layouts.
If no custom layoutfiles are available, a message that no custom layoutfiles are available is displayed.
Image 10-49
3. Use the▲or▼key to select the desired customfile and pressENTERto delete.
Aconfirmation window is displayed.
Image 10-50
4. Use the▲or▼key to selectYesand pressENTERto delete the custom layout.
SelectNoif you want to quit without deleting the customfile.
172
R5905032 HDX SERIES 23/11/2011 
						

							10. Layout
10.5.4 Delete all layoutfiles
Only custom layoutfiles can be deleted. The current selected custom layout cannot be deleted.
How to delete
1. PressMenuto activate the menus and selectLayout→Layout File Services→Delete All.
Image 10-51
Main menu, layout
Image 10-52
Layout, layoutfile services
Image 10-53
Layoutfile services, delete all
2. PressENTERto select.
TheDelete allconfirm window opens.
If no customfiles are available, a message that no customfiles are available is displayed.
Image 10-54
Layoutfiles, delete all confirmation
3. Use the▲or▼key to selectYes.PressENTERto delete all layoutfiles.
R5905032 HDX SERIES 23/11/2011
173 
						

							10. Layout
10.5.5 Copy or Save as layoutfile
What can be done?
The current loaded layout, custom layout or custom created layout, can be copied into a newfile.
How to copy / save as
1. PressMenuto activate the menus and selectLayout→Layout File Services→Copy/Save as.
Image 10-55
Main menu, layout
Image 10-56
Layout, layoutfile services
Image 10-57
Layoutfile services, copy/save as
2. PressENTERto select.
TheCopy layoutfilewindow opens.
If no custom layoutfiles are available, a message that no custom layoutfiles are available is displayed.
Image 10-58
Copy layout
3. Use the▲or▼key to change the selected character.
Use the◄or►key to select another character.
Note:Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically. Arrow key left (◄) has the backspace functionality.
174
R5905032 HDX SERIES 23/11/2011 
						

							10. Layout
10.6 Zoom - Focus - Shift windows
What can be done ?
Different custom layouts can have different zoom/focus/shift settings, e.g. when using the projector on 2 different projector distances
or two different screen sizes (same image but 2 custom layouts needed due to different zoom/focus/shift settings).
Adjust the lens settings for the different situations and save these settings each in a different custom layout.
When using only one screen to project the different layouts, the same lens settings can be used for all custom layouts.
When using different screens, different lens settings can be used (settings saved in the customfile will be used). To use different
lens settings, it is important that the lens is calibrated so that the lens always returns to the saved position when opening a custom
layout.
Switching from a customfile (layout) to a standardfile (layout) will not change the current lens settings.
How to set the zoom - focus setting
1. PressMenuto activate the menus and selectLayout→Zoom / Focus / Shift.
Image 10-59
Main menu, layout
Image 10-60
Layout, Zoom/Focus/Shift
2. PressENTERto select.
TheZoom/Focus/Shiftwindow opens.
Image 10-61
Zoom/focus/shift setting
3. PressENTERto toggle Same Zoom/Focus/Shift between[Yes]or[No].
[Yes] = each layout will use the same zoom/focus/shift settings. The zoom/focus/shift settings of the previous selected layout will
be applied to the next selected layouts.
[No] = each layout will use its own zoom/focus/shift settings. Lens should be calibrated, when using this setting.
4. If[No]is selected, the calibrate lens menu opens.
Image 10-62
Lens calibration
Before different zoom/focus/shift setting can be used, the lens should be calibrated. When a lens change has taken place, always
calibrate the lens before using this setting.
5. If you have to calibrate the lens, selectYe sand pressENTERto start the calibration.
R5905032 HDX SERIES 23/11/2011
175 
						

							10. Layout
During the calibration, a message is displayed. This message disappears when the calibration isfinished.
Image 10-63
Lens calibration message
176R5905032 HDX SERIES 23/11/2011