Barco Hdx Series Installation Manual

							14. Service
14.7 USB memory
Purpose
2 functions are available
• Custom settings can be saved on a USB stick.
• A selection of saved settings can be (down)loaded via an USB stick on the projector.
How to save custom settings
1. PressMenuto activate the menus and selectService→USB Memory.
Image 14-53
Main menu, service
Image 14-54
Service, USB memory
Image 14-55
USB memory selection
2. SelectSave Custom Settingsand pressENTERto download this set.
Note:Make sure a formatted USB stick is inserted in the USB connector.
When no USB stick is available, a message will be shown: No USB device is found.
The name of the custom settingsfiles contains the serial number of the projector from which ti is downloaded.
Load custom settings
1. PressMenuto activate the menus and selectService→USB Memory.
R5905032 HDX SERIES 23/11/2011
297 
						

							14. Service
Image 14-56
Main menu, service
Image 14-57
Service, USB memory
Image 14-58
USB memory selection
2. SelectLoad Custom Settingsand pressENTER.
An overview of the available sets of custom settings is given.
Image 14-59
Custom settingsfiles
3. Select a set and pressENTERto upload this set.
298
R5905032 HDX SERIES 23/11/2011 
						

							14. Service
14.8 Reset Formatter
Why and when
A reset formatter is necessary when e.g. a color is missing, artifacts are visible in the image or image is frozen and the formatter
test patterns cannot be displayed.
How to reset
1. PressMenuto activate the menus and selectService→Reset Formatter.
Image 14-60
Main menu, service
Image 14-61
Service, reset formatter.
2. PressENTERto select. Use the▲or▼key to selectYe s.orNoand pressENTER.
Image 14-62
Reset formatter
If you want to reset the formatter, selectYes.
If you do not want to reset the formatter, selectNo.
R5905032 HDX SERIES 23/11/2011
299 
						

							14. Service
14.9 Refill mode
Before selecting Refill mode, takefirst all preparations necessary to refill the cooling circuit.
What can be done?
When all necessary preparations are taken, the refill mode activates automatically the refill process.
For more information about the refill process, consult the Service manual.
How to start the refill mode
1. PressMenuto activate the menus and selectService→Refill Mode.
Image 14-63
Main menu, service
Image 14-64
Service, refill mode
2. PressENTERto select. Use the▲or▼key to selectYe s.orNoand pressENTER.
Image 14-65
If you want to start the refill mode, selectYes.
If you do not want to start the refill mode, selectNo.
300
R5905032 HDX SERIES 23/11/2011 
						

							14. Service
14.10 Save Custom Settings
What can be done ?
The current custom settings can be saved to internal backup device in the same way as it would be done when the projector lamp
was switched off.
When settings are changed when the lamp is off, a manual Save custom settings must be executed to save the changes.
When the messageSaving datais displayed, never switch off the projector.
How to save
1. PressMenuto activate the menus and selectService→Save Custom Settings.
Image 14-66
Main menu, service
Image 14-67
Service, save custom settings
2. Use the▲or▼key to selectYesand pressENTER.
Image 14-68
Save custom settings, question
R5905032 HDX SERIES 23/11/2011301 
						

							14. Service
14.11 Special HD Camera mode
What can be done ?
Special HD Camera mode enables special sequences for the DMD’s to support specific sources such as the Thompson Grass
Valley Worldcam. It shouldn’t be used in any other circumstances as it would cause imageflicker and dimmed images with normal
sources.
Default position : [Off]
How to switch
1. PressMenuto activate the menus and selectService→Special HD Camera Mode.
Image 14-69
Main menu, service
Image 14-70
Service, special HD camera mode
2. PressENTERto toggle between[On]and[Off].
302
R5905032 HDX SERIES 23/11/2011 
						

							14. Service
14.12 Auto Dimming when over-temperature
What can happen?
When an over-temperature is detected, the projector starts dimming the lamp so that the projector can cool down.
How to activate - deactivate
1. PressMenuto activate the menus and selectService→Auto Dimming when Overtemperature.
Image 14-71
Main menu, service
Image 14-72
Service, auto dimming when over-temperature
2. PressENTERto toggle between[On]and[Off].
[On] : Dimming is started when an over-temperature is detected.
[Off] : No dimming is started when over-temperature is detected.
R5905032 HDX SERIES 23/11/2011
303 
						

							14. Service
14.13 Time and Date
How to set
1. PressMenuto activate the menus and selectService→Time and Date.
Image 14-73
Main menu, service
Image 14-74
Service, time and date
Image 14-75
Date and time set up
2. Use the▲or▼key to selectHour,Minute,Day,MonthorYearand pressENTERto select.
3. Use the▲or▼key to change the selected character.
Use the◄or►key to select another character.
Note:Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
4. PressENTERto accept the changes.
Repeat for other values in the same way.
304
R5905032 HDX SERIES 23/11/2011 
						

							15. Maintenance
15. MAINTENANCE
About this chapter
This chapter contains general maintenance procedures which can be easily performed by the operator of the projector.
Overview
• Cleaning the lens
• Cleaning the exterior of the projector
R5905032 HDX SERIES 23/11/2011
305 
						

							15. Maintenance
15.1 Cleaning the lens
To minimize the possibility of damage to optical coatings, or scratches to lens surfaces, we have developed
recommendations for cleaning. FIRST, we recommend you try to remove any material from the lens by blowing
it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
To r a y s e eTMcloth (delivered together with the lens kit). Order number : R379058.
Howtocleanthelens?
1. Always wipe lenses with a CLEAN TorayseeTMcloth.
2. Wipe lenses in a one single direction.
Warning:Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave the cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are thefirst indication of a dirty cloth.
CAUTION:Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the
cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Other lenses can also be cleaned safely with this TorayseeTMcloth.
306R5905032 HDX SERIES 23/11/2011