ATT DEFINITY Communications System Generic 3 Instructions Manual

CallVisor Adjunct/Switch Ap plications Interface (ASAI)
Issue  3   March 1996
3-517
group causes an Alerting Event Report to be sent to all domain-c ontrol 
associations for the terminating group. For  the  member  of the g roup that 
answers the call, a Connected Event Report is returned to the answering 
member domain controller(s) with the station which answered the call. All 
the domain controllers for the other group members (non-answering 
members without TEG buttons) receive a Call Redirected...

Feature Descriptions
3-518Issue  3   March 1996 
The Transfer Event Report is sent to all active associations for the resultant 
call. For ad d itional information on the Transfer interactions, refer to 
Conference/Transfer feature interaction bullet item in this section.
nTrunk-to-Trunk Transfer
When this feature is enabled, adjunct-monitored or controlled calls 
(except switch classified calls) transferred from trunk-to-trunk are allowed.
nVoice Message Retrieval
A station user hears ‘‘Please call...

CallVisor Adjunct/Switch Ap plications Interface (ASAI)
Issue  3   March 1996
3-519
—Set Value Group — Allows the adjunct to request status changes 
for Message Waiting lam ps (that is, control the on/off state of the 
lamps), and billing changes for 900-type calls. Note that billing 
changes require that the Flexible Billing option b e enabled on page 
1 of the System-Parameters Customer Options form.
A T&T-AS A I Links 
— Allows an AT&T ASAI enabled adjunct to 
activate a proprietary link.
Table 3-49...

Feature Descriptions
3-520Issue  3   March 1996 
Request Feature X
Notification Request X
Notification Cancel X
Notification Ended X
Route En d X
Route Request X
Route Select X
Set ValueX
Stop Call Notification X
Third Party  Answer X
Third Party Auto Dial X
Third Party  Call 
Ende dX
Third Party Clear Call X
Third Party  Domain 
ControlX
Third Party  Domain 
Control Ende dX
Third Party Make Call  X
Third Party Merge X X
Third Party 
ReconnectXX
Third Party Relinquish 
ControlXX
Third Party Selective...

CallVisor Adjunct/Switch Ap plications Interface (ASAI)
Issue  3   March 1996
3-521
NOTE:
By enabling the CallVisor ASAI option(s), the following c a pabilities are 
automatically enabled as well, regardless of the groups selected: Value 
Query (includes Response Continued Capability), Abort, Heart Beat, 
Restart Procedure, Susp end/Resume Alarm.
nHunt Group Form
If an ACD split is to be  adjunct controlled, the “ Controlling Adjunct”  field of 
this form must be a dministered as only available with ASAI...

Feature Descriptions
3-522Issue  3   March 1996 
For an OCM application using network answer supervision, those trunks 
which support network answer supervision should have the “Answer 
Supervision”  field set to ‘‘yes.’’ For trunks that do not receive real answer, 
the “ Answer Supervision Timeout”  field determines when the ASAI event 
connect is sent.
nStation Form
A CallVisor ASAI endpoint must be a dministered with station type ‘‘ASAI’’ 
or ‘‘asai,’’ or ‘‘AT&T-ASAI link.’’ A maximum of four/eight...

CDR Account Code Dialing Forced  Entry of A ccount 
Codes
Issue  3   March 1996
3-523
CDR Account Code Dialing Forced
Entry of Account Codes
Feature Availability
This feature is available with all Generic 3 releases except for G3vs/G3s ABP.
NOTE:
The Ca ll De tai l Recording (CDR) feature was previously called the ‘‘SMDR 
Account Code Dialing’’ feature.
Description
Allows c ertain calls to b e associated with a particular project or account number. 
This is accomplished by dialing specified account c o...

Feature Descriptions
3-524Issue  3   March 1996 
nAll Calls Made on a Trunk Group With a Specific COR
Any trunk group that is assigned a COR with forced entry of account 
codes cannot be accessed until an account code is dialed. If a call is 
being routed via ARS, account code checking is not done on the trunk 
group’s COR.
Any time an account code is required and the user does not enter an account 
code, intercept tone is heard.  An account c o de is never required for the 
following:
nAttendant...

CDR Account Code Dialing Forced  Entry of A ccount 
Codes
Issue  3   March 1996
3-525
nBusy Verification of Terminals and Trunks
An attendant or voice terminal user is never required to enter an account 
code when making a busy verification.
nCall Forwarding 
Calls cannot be forwarded to a destination where a user is required to 
enter an account code.
nLast Numb er Diale d
The CDR access code and account c o de dialed are stored as part of the 
Last Number Dialed.  However, some  digits may b e lost d...

Feature Descriptions
3-526Issue  3   March 1996 
Centralized Attendant Service (CAS)
Feature Availability
This optional feature is available with all Generic 3 releases except G3vs/G3s 
ABP. 
Description
Allows services performe d by attendants in a private network of switching 
systems to be concentrated at a c entral, or main, location.  Each branch in a CAS 
has its own LDN or other type of access from the public network.  Incoming trunk 
calls to the branch, as well as attendant-seeking voice...