Anaheim HMIPLC Release note for Version 16 all20110601 Users Guide

 
Only show the event which doesn’t recover: if checked, so Only show the event 
which doesn’t recover, If a event  recovers, it will not be displayed in the Event Display list. 
If uncheck  Only show the event which doesn’t recover,  so the events that were 
triggered and have recovered are still displayed in the Event Display list, unless clear the 
Event Display list. 
13 Min Time Interval 
In each setting components ,add a option of  Min Time Interval(seconds), it is the 
effective interval of...

    Add a Video Mode NTSC to HMI that support video interface. Industrial camera 
that support NTSC mode can use this m ode., and now our HMI support two video mode: 
PAL and NTSC. 
 
15 Vector Fonts Edge Blur; 
  Use the  Vector Fonts Edge Blur  can make the words look smooth, beautiful and 
without toothed shape along  the edge, but the computation  of HMI will increase if check 
the  Vector Fonts Edge Blur  function, and it will be slow  when HMI refreshing, so if  
users who don’t    care much about...

 
The following two pictures are the effect contrast between select the Vector Fonts 
Edge Blur  and unchecked.. 
1 Uncheck the Vector Fonts Edge Blur  
  
2 Select the Vector Fonts Edge Blur   

 
It is very obvious that it is more smooth and beautiful and there is no teethed shape 
along the edge of word if select the  Vector Fonts Edge Blur 
16 Invalided component color 
The use of Invalided component color:  if the enable condition of a component can 
not be met or be invalid, HMI can set a sign of In valid for it , it means that the component 
is invalid, and the touch is invalid. If the en able condition of this component is met, the 
sign will disappear automatically,  so the component...

 
2 Set a Bit State Switch M0, chose the Conditional Enabling in Control Setting  of 
Bit state Setting Component Attribute , chose the Word control  = =0 in the Register 
Control , then chose the  Show Elements Invalid Tag .  

 
3 Set a Number Input component VW0 
4 Offline Simulation , if VW=0 ,M0 can be operated, if VW0=50 , M0 can not be 
operated , and show the invalid tag.. 
 
  

 
17 When security level is 0.there is no password    

 
18 Customize the printing in PLC Control component   
There are two types of printing in PLC Control: Screen Hard Copy and Report 
Printout 
1 Screen Hard Copy 
A bit component is used to control the Screen Hard Copy, when the component’s 
state switch ON , the current screen is printed out.  

 
As shown in the above picture, use LB0 to control Screen Hard Copy, if LB0 switch 
is ON, the content in the window wh ere the LB0 is set is printed out. 
There are two ways to set the output mode of printing content: 
  1 , Use the Custom Print Options   

 
Explain for the attributes of Custom Print Options: 
Custom Print Options Detail descriptions 
MonochromePrint Color Color 
Only color printer supports the  Print 
Color  chose 
MagnificationRange from 0.1 to 5.0 （Reduce the printing distortion, not 
recommended ） 
Current PagePrint the content to the first paper in 
printer Print Page 
Change Page 
To Print When the printer receive the print 
command ,it print a blank paper, then print 
the content to the second paper