Anaheim HMIPLC Release note for Version 16 all20110601 Users Guide

							
 
Only show the event which doesn’t recover: if checked, so Only show the event 
which doesn’t recover, If a event  recovers, it will not be displayed in the Event Display list. 
If uncheck  Only show the event which doesn’t recover,  so the events that were 
triggered and have recovered are still displayed in the Event Display list, unless clear the 
Event Display list. 
13 Min Time Interval 
In each setting components ,add a option of  Min Time Interval(seconds), it is the 
effective interval of touching a same component. 
As shown in the picture,  the default is zero second: 
 
 
14 Add a Video Mode NTSC  
						

							
    Add a Video Mode NTSC to HMI that support video interface. Industrial camera 
that support NTSC mode can use this m ode., and now our HMI support two video mode: 
PAL and NTSC. 
 
15 Vector Fonts Edge Blur; 
  Use the  Vector Fonts Edge Blur  can make the words look smooth, beautiful and 
without toothed shape along  the edge, but the computation  of HMI will increase if check 
the  Vector Fonts Edge Blur  function, and it will be slow  when HMI refreshing, so if  
users who don’t    care much about the effect about the vector fonts, and want the HMI to 
refresh quickly , uncheck this f unction, because the default is to select this function. 
This function can’t support t he component of Event Informat ion, Event Display, Alarm 
Display, Alarm list, History Event Display, Oper ation Log, the reason is that: this function 
can not support the component t hat display word of various color at same time. 
Settings of Vector Fonts Edge Blur 
In the page of  HMI Extended Attributes,  select the Vector Fonts Edge Blur   
						

							
 
The following two pictures are the effect contrast between select the Vector Fonts 
Edge Blur  and unchecked.. 
1 Uncheck the Vector Fonts Edge Blur  
  
2 Select the Vector Fonts Edge Blur   
						

							
 
It is very obvious that it is more smooth and beautiful and there is no teethed shape 
along the edge of word if select the  Vector Fonts Edge Blur 
16 Invalided component color 
The use of Invalided component color:  if the enable condition of a component can 
not be met or be invalid, HMI can set a sign of In valid for it , it means that the component 
is invalid, and the touch is invalid. If the en able condition of this component is met, the 
sign will disappear automatically,  so the component can be used. Only control 
components , like  Switch, Multiple State Setting  etc can use this function , the    display 
components  , like  Indicator, Multiple State Display  etc can not use this function 
Example for the usage of  Invalided component color 
If value of VW0 is 0 , the Bit State Sw itch M0 can be operated or it can not be 
operated, and display the sign of invalid
 
  1 Set the color of invalid comp onent: double click the HMI, chose the  HMI 
Extended Attributes  page, select the color of invalid component as red.  
						

							
 
2 Set a Bit State Switch M0, chose the Conditional Enabling in Control Setting  of 
Bit state Setting Component Attribute , chose the Word control  = =0 in the Register 
Control , then chose the  Show Elements Invalid Tag .  
						

							
 
3 Set a Number Input component VW0 
4 Offline Simulation , if VW=0 ,M0 can be operated, if VW0=50 , M0 can not be 
operated , and show the invalid tag.. 
 
  
						

							
 
17 When security level is 0.there is no password    
						

							
 
18 Customize the printing in PLC Control component   
There are two types of printing in PLC Control: Screen Hard Copy and Report 
Printout 
1 Screen Hard Copy 
A bit component is used to control the Screen Hard Copy, when the component’s 
state switch ON , the current screen is printed out.  
						

							
 
As shown in the above picture, use LB0 to control Screen Hard Copy, if LB0 switch 
is ON, the content in the window wh ere the LB0 is set is printed out. 
There are two ways to set the output mode of printing content: 
  1 , Use the Custom Print Options   
						

							
 
Explain for the attributes of Custom Print Options: 
Custom Print Options Detail descriptions 
MonochromePrint Color Color 
Only color printer supports the  Print 
Color  chose 
MagnificationRange from 0.1 to 5.0 （Reduce the printing distortion, not 
recommended ） 
Current PagePrint the content to the first paper in 
printer Print Page 
Change Page 
To Print When the printer receive the print 
command ,it print a blank paper, then print 
the content to the second paper