Anaheim HMIPLC Release note for Version 16 all20110601 Users Guide

 
2 Support the input support of Chinese and English , click the CH key to switch the 
input method, as shown in  the followings    picture: 
 
 
If the pop up window calls the keyboard, don’t select the Clipping  in 
the Pop up Window Type . 
 
33 Tag Cross border Check 
Tag Cross border Check  in Tag ,  this function is used w hen tag is too long, or 
Multilanguage , because the lengt h of tag is different in different languages. The  Tag 
Cross border Check is  selected in default.   
And if the Tag...

border of component, the component will be lengthen, and display all the content of tag ,  
If  uncheck the  Tag Cross border Check,  when the length of tag is exceed the 
border of component, the component will not  be lengthen, the content that exceed the 
border is clipped. The effects of select and uncheck the  Tag Cross border Check are 
shown in the followings pictures: 
 
 
  

 
34 Modify the font entirely 
Select the components that need to change font, use the tools in Font Toolbar and 
Tag Toolbar  to change the tag font. 
 
35 Switching to the lowest secu rity level when window closed 
If set the security level to a window, and clear the password when window closed, the 
password is required again when enter the wi ndow. If in the V1.5 or lower version ,a 
Multiple State Setting component is required  to achieve this function, the address is 
LW9043,  Setting Mode  is Set...

1 Add a new Copy Type called Pitch  in Muti-Copy,  as follows: 
 
The difference between the  Copy Type: Pitch and  Interval 
Interval: Begin copying at the right outer border of component   
 
Pitch: Begin copying at the  top left of component 
 
2 Add  Decrease  to the Address Auto Change Mode, the address range is from 
1~9999.  

37 System Scroll Bar Width 
The components have scroll bar themselves, for example Operation Log, the scroll 
bar width can be set by the  System Scroll Bar Width  in HMI Extended Attributes. As 
follows: 
 
The  System Scroll Bar Width  ranges from 20 to 120 pixels. And the effect is obvious 
if the interval is bigger  than 4.For example ,24,28 32. 
38 The components correspond to F1 to F12 on the keyboard 
 This function is only suitable  to the HMI that support USB host  

 
HMI that support the USB host can connect a external keyboard, and every setting 
component can corresponds to one of  F1 to F12 on the keyboard. 
39 Number Input/Text Input/Text Display/Note Book component 
The improvements of Number Input/Text Input/Text Display/Note Book 
component are as followings: 
Read Address  and Write Address  can be the same or different.  

 
2 Attribute page of  Keyboard Setting 
 
Public Window Keyboard: Use the public window keyboard,  it is the same as V1.5. 
all the Number Input component call the keyboar d inn window 3. And the default is use the 
Public Window Keyboard  

Specified Keyboard: call a specified keyboard. Note : chose the  Keyboard page in 
the  Window Attribute  , so that the window where the keyboard set can be saw  in the 
Specified Keyboard list. 
Keyboard Pop-up Position:  9    positions are available to select 
Not Use Pop-up Keyboard:  only suitable for HMI that support USB host, and input 
number via the external keyboard. 
Use Input Order:  please refer to the Use Input Order  part 
Then introduce the new functions of Text Input/Text Display/Note...

shown in the followings figure: 
 
41 Install the USB driver automatically 
USB driver in EV5000 V1.6 has passed the Microsoft certification, so the USB 
software is installed automatically  when inst alls the EV5000, you needn’t to install it 
manually.  
42 Customize the CAN co mmunication protocol   
  EV5000 V1.6 supports customizing the CA N communication protocol, the user can 
write his CAN communication protocol . The related saving path is in doc of EV5000 
installation catalog , and the...

 
Open two projects of different names, copy a project to the other by the ways of 
shortcut CTRL+A or C ，CTRL+V, or click the menu  Edit >>> Copy/ Past 
44 EvDownload box 
As shown in the picture: 
 
Each function is as follows: 
1 Data File:  Download current project 
2 Recipe File: Download the .rcp file in the project  if there is a rcp file in the project 
3 LOGO File: Download the initial window picture  .logo file. If the user changes the 
picture in the  Edit Initial Window,  you should select...