Anaheim HMIPLC Release note for Version 16 all20110601 Users Guide

Clear FRW Data: Clear the data that saved in FRW register 
Download to USB1 : Down the project to USB1 , and run it in USB1 
Download to USB2: Down the project to USB2 , and run it in USB2 
Download to SD: Down the project to SD ca rd, and run it in SD card. 
45 EV5000 V1.6 can run in the vista and win7 operation system 
When use the vista operation, please note that: 
a. Support the 64 bit operation system only 
b. Don’t install Ev5000 in the C disk , and login the system with adm inistrator identity...

 
If click No, cancel the operation. 
Explains for the files in the project folder: 
temp : Backup project that compiled the last time 
ProjBK:  If click No,  system bucks up a old version in the  ProjBK folder  
47 Full screen logo is supported 
The HMI that support full screen logo are 4424T and 4424TE 
48 How to judge if the USB disk and SD card are read by HMI . 
Note   This function is only suitable for the HMI that support USB host or SD card 
Set the dial code switch 1 and 2 to  ON position, as...

 
Click  or  
1 If the USB disk or SD card are not read by HMI, it display the screen as follows: 
 
2 If the USB disk or SD card are read by HMI, it display the screen as follows: 
 
There will be a SD card or USB disk sign displaye d, that is to say the USB disk or SD card 
are read by HMI. 
49 Only Show Fast Selection Button  

In Task Bar  of HMI Attribute  , click the Only Show Fast Selection Button.  So the HMI 
only show the fast selection button. 
 
The offline simulation effect: 
  

50 The Chinese font box height is adjustable 
When we use phoneticize input methods, the Chinese font box height is adjustable, it is in 
the  Chinese Font Box Height  of HMI Extended Attribute  in HMI Attribute, and it ranges 
from 24 pixels to 99 pixels. 
 
The offline simulation effect: 
If the  HMI Extended Attribute  is 24: 
 
If the  HMI Extended Attribute  is 34: 
 
51 The notification function of Controllin g component can notice word register 
In Bit State Setting ,Bit State Switch , Number...

word register address before the signal input 
the controller   
Register(Word) After Written 
Notice Write the Written Value  into the specified 
word register address after the signal input 
the controller 
 
For example: Number Input component LW0,  notice the LW10 , the Written Value is 100 
after LW0 is written. 
The settings of  Notification in Control Setting  of Number Input component ：  

 
The offline simulation effect is as follows: 
Before input value into the LW0: 
 
After input value into the LW0: 
 
 
Add new PLC drivers 
1 Siemens 1200 network driver protocol    

2 Siemens 300 network driver protocol 
3 Yokogawa FA-M3 serial port driver 
4 Yokogawa FA-M3 Ethernet port driver 
5 Millenium 3 
6 Parker SLVD 
7 RKC driver 
8 Tsinghua Moto field bus driver 
9 Modrol driver 
10  Inovance H2u driver 
Add new printer driver 
Add a new printer(MeiYu), the type is MY-POS80K