Anaheim HMIPLC Release note for Version 16 all20110601 Users Guide

 
28 Group components   
Combine multi components or graphics and save them to the Group components 
Library,  so that other projects can us e them, the file format of Group components 
Library is .pgl. 
The method of entering the  Edit Box of Group components Library: 
Click menu , Draw>>>Group components>>>Use the group element,  or right 
click the blank part in the edit window, select the  Group then ,click the  Use the group 
element,  then pop up the  Edit Box of Group components Library 
 
Export...

path users defined. So that it can be imported by other projects   
Import Library: the default path of Group components Library is under the Ev5000 
installation catalogue named UerLib. And the us er can also import the library from the 
customized path: click the  Import Library, and find the path where the  Group graphics 
Library  saved, select the library, then click  Open, so the library is added to  Group 
graphics Library  of current project   
New Library 
  Click the New Library,  pop up the...

 
 
For Delete Library, Delete All Groups, Delete Group 
Components , they delete the corresponding files in the usrlib 
folder of EV5000 installation catalog directly   
 
Place Group Components 
Click the  Place Group Components,, the selected  graphic will be placed in the 
current edit window. 
Example: 
How to add the group graphics to the new group graphics library: 
1 Click the menu ,then  Draw>>>Group components >>>Use the group  elements, 
pop up a dialog box, then click New Library,  input the...

2 Place three rectangle in the edit window. As shown in the following picture: 
 
Select all the three rectangle, right click, Groups>>>Save the group element ,  then 
click th e Save Group Components  in the Edit Box of Components Library, pop up a 
dialog box as follows: 
 
3  Input  graphic 1  in the name box, click  OK, so the three rectangle named graphic 1 
i s added into the library named  group, as follows:  

 
4 If you want to  add more group elements to the group  again , the method is the 
same as above, when save the group elements ,just select the  group in the Group 
Components  list. 
29 Add Broadcast number in Modbus RTU , as in the following picture: 
 
30 Change Window (Ignore the window 0) 
In the Plc Control,  add a option of Change Window (ignore the window 0), as 
shown in the following picture:  

 
The difference between the Change Window and Change Window (Ignore the 
window 0) in PLC Control: 
Change Window:  when the window number is 0, change to the window 0  
Change Window (Ignore the window 0): when the window is 0, don’t change the 
widow 
 
31 The popped up position of Direct/ Indirect window is variable 
The pop up position of Di rect/ Indirect window can be controlled by register 
The corresponding settings: 
1 Select the  Variable Display Coordinates:  

 
Corresponding attributes are as follows: 
X Coordinate of popped up 
window 
Y Coordinate of popped up 
window 
First address First address+1 
So the popped up position of Direct/ Indirect window is controlled by two register 
addresses  , X Coordinate is controlled by the first  address, Y Coordinate is controlled by 
the first address +1,  
But for some special PLC, for example. S7-200, the addresses must be even, as 
shown in the following picture, VW80 contro ls the X coordinate VW82 controls the...

 
32 The method to use the keyboard 
    In EV5000 Group Components Library, there are 21 default types of keyboards 
to choose. They are: 
Three different styles of  small hexadecimal keyboards : HEX_S_T1~T3; decimal 
number keyboard of NUMERAL_S_T1~T3;  ASCII keyboard: ASCII_S_T1~T3. these 
keyboards are applicable to the small size HMI under 320*240 resolution ratio 
Three different styles of middle hexadecim al keyboards, HEX_M_T1~T3; decimal 
number keyboard, NUMERAL_M_T1~T3; ASCII keyboard,...

 
2 Then pop up the dialog box titled Replace Confirm Dialog, choose Yes All: 
 
3 Close the Edit Box Of Group Components Library, so the keyboard is 
displayed in the window: 
 
4 Place the keyboard in the fr ame 9, double click to show the  Window Attribute,  

change the Width and Height of the window , select the Keyboard page  in Special 
Attribute  
 
In the window where the keyboard placed ，make sure select the 
Keyboard page  in Special Attribute  
5  Place a Number Input com ponent in frame 0, select the Specified Keyboard 
9:Frame 9  in Keyboard Setting  option. As shown in the followings picture: 
 
5  Offline simulation, click the Number Input component, pop up the keyboard 
just placed in frame 9.As show n in the followings picture: 
 
Then...