Anaheim HMIPLC Release note for Version 16 all20110601 Users Guide

 
 
 
 
For example, change the system information “PLC no response” as “PLC disconnect” as 
follows:  

 
Then when the HMI disconnect to PLC, it will appear this information as follows:  

 
8. Copy/Cut/Paste Files among Extended Memories. 
    EV5000 v1.6 provide the copy and cut function among files in extended memories. 
Rcp and pkg files in USB1,USB2,SD card in  a same HMI can be copied, cut and pasted 
among each other. 
 
1.This function is only suitable for t he HMI that have USB or SD card in 
it.   
2.The file operation func tion is only used for rcp or pkg files in USB or 
SD card   
    A special register Lw9366 is provided  to execute the operation of copying cutting 
and...

After offline simulation you will see: 
 
Choose the file you want, and click the “Copy” button. 
 
Suppose we need to copy file in USB1 to SD  card, switch to SD card path then click 
“Paste ”. That is ok.  

 
Other operations are the similar. 
 
9. Screen flip display 
The best visual angle for a HMI is looking  squarely at the screen. In some special 
situation, we need to watch the screen from upside down, we look down at the screen, but 
the effect is not very good, so there is a new  function of flipping the screen, in this way, it 
can be the same effect as the squarely view. 
There are two methods to turn the screen” 
1,In  HMI Extended Attributes option  of HMI Attribute, select the Screen Flip...

 
The offline simulation effect : 
  

2, Use a special register LB9163(readable and writeable) to control the screen 
flipping. When LB9163 is ON, HMI display a  flipped screen. By this method, the screen 
will become normal after the power is off or restart the HMI. 
Example: 
Place a Bit State Switch component, its  Read Address is LB9163, Switch Type  is 
Toggle. 
 
 
 
When the LB9163 is ON it display a flipped  screen, when the LB9163 is off , it is a 
normal screen, the offline simulation effect is as follows:  

 
 
10 Reset the toolbar 
    When the toolbar is moved to other potion, and we want to recover the system 
default position, you onl y need to click Menu>>> Edit>>>Reset toolbars, and the toolbar 
will be reset:  

 
 
11,User’s permission 
  EV5000 has 32 users and 32 operation permissions, the users and operation 
permissions can be set respectively, the operati on permissions are free of users limit. And 
you also can add or delete the users, modify permissions in HMI on line . 
1,Settings of user’s permission 
Double click the HMI, in HMI Attribute window , click the User’s Permission Setting , 
User Permissions Setting Enabled . Input the User Name ,  Password and Logoff Time , 
select the  Authorization ....

permissions, they are operation permission , technology configuration permission, system 
configuration permission, add and delete users permission 
 
2. User 1, settings of user permission information: select the Enable, User Name is 
Engineer: Password is 222222; Logoff Time is  10 minutes. Give the user a permission: 
Technology configuration permission