Anaheim HMIPLC Release note for Version 16 all20110601 Users Guide

 
 
5．The off-line simulation effect as follows:  

 
3)The difference between Historical Event Display component and Event Display 
component. 
1 ．Historical Event Display component can query by file order or date and display. 
Event Display component can’t query by file order or date and display. 
2．Historical Event Display component can  only read the event information saved in 
external    
storage. 
Event Display component can read event information saved both in HMI recipe 
memory and in   
external storage.   
3 ．Historical Event Display component...

 
For example. 
The address of  Camera component is LW0.When LW0=0,it will close the 
camera.When LW0=1,it will open the came ra which connect to USB HOST 1.When 
LW0=2,it will open the camera which connect to USB HOST 2.   
 
1 ． Only the HMI which support US B HOST can support Camera 
component. 
2 ．When open the camera in one of the USB HOST,then the other camera 
will close automatically. 
 
 Support most brands of camera in the market. 
6. Combination Operations Component 
Combination Operations...

 
1． Add  components 
Right click in the blank on t he left side of the component  attribute to add bit state 
setting component or multiple state setting component. 
 
1. Before adding components, user  can change the component’s execution 
sequence by selecting I nsert Before, Insert Behind in the right-click 
menu.  
2. For the added component,user c an change the component’s execution 
sequence by selecting  Move Up ,Move Down  in the right-click menu.   
3. Select Delete in the right-click menu to...

 
 
 
It can only add 16 components at most in Combination Operation 
Component. 
 
2．Edit component attribute   
The attribute of adding component can be edi ted separately at the right side.    

 
Bit State Setting only support setting mode such as ON,OFF and Toggle. 
 
  

 
Multiple State Setting only support type of Set Constant,Add Value and Sub Value. 
       
3. Exiting when component execution failed   Option 
  Tick Exiting when component execution failed   option indicates that if any 
component can’t excute succes sful,then it will finish excuting without excuting next 
component.  
Don’t tick this option indicates if any co mponent can’t excute successful,then it can 
ignore this component and excute next component. 
7. Historical Data Display Component...

【Subdirectory】  in following figure. 
3.Historical Data Display component can use together with Trend Curve,but 
the sampling address and channels can’t be the same,and the subdirectory 
for saving can’t be the same either.When  using the Historical Data Display 
component together with Trend Curve ,then it can only save one of 
them,they can’t be save at the same time .If user want to use Historical Data 
Display component to display the sa mpling datas of Trend Curve,then you 
can transfer the PLC’s...

 
When the datas saved in the external device is up to the maximum,then user can clear 
all the datas through system registers.   
LB9156~9158 is corresponding to SD card,USB1,USB2.When LB9156~9158 set 
ON,it will clear the files about historical dat as,historical event,operation record and screen 
shot and so on.After operation finish ,it will set OFF by automatical. 
8. Dynamic Graph Component   
Dynamic Graph Component is used to change the position and size of 
rectangle,ellipse or straight line by...

 
 
Dynamic Graph Position Attribute