Amanda Work Group Installation Manual
Here you can view all the pages of manual Amanda Work Group Installation Manual. The Amanda manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 51
Chapter 5: Installing Amanda Software Running the Installation Program Install Amanda software only after you have: Installed the voice boards. (Voice server only) Installed an NE2000-compatible Ethernet LAN card. Follow the installation checklist that is in the chapter that explains how to configure the voice boards you use: “Chapter 2: Installing RDSP/x32 Boards” “Chapter 3: Installing RDSP/RTNI Boards” If you are installing Amanda as a voice server, have your MS Workgroup Add-on for DOS...
Page 52
40 Installing [email protected]/DOS You see a screen similar to the following: Correct operation of an Amanda Call Processing system depends on accurate time and date settings in the computer. To assure correct operation, please verify these now. Here are the present time and date: Current time is 3:13:04.99p Current date is Tue 01-14-1997 Are these values correct[N,Y]?...
Page 53
Chapter 5: Installing Amanda Software 41 Information similar to the following appears on the screen. This program installs or un-installs [email protected]/DOS Version 7.xx Revision X on your computer system. You may press the [Esc] key at any time to stop the installation. PLEASE NOTE: This installation stores backup copies of any files that it overwrites on your hard disk. If after...
Page 54
42 Installing [email protected]/DOS REINSTALLATION MENU [email protected]/DOS Version 7.xx Revision X is already installed on this machine. Select the action that you want to be performed. Use the arrow keys to make a selection; then press Enter. Re-install [email protected]/DOS Version 7.xx Revision X Un-install the existing [email protected]/DOS 7.xx Revision X system Test...
Page 55
Chapter 5: Installing Amanda Software 43 6. You see a screen similar to the following: Since this a first time installation, [email protected]/DOS needs to know if this system uses Brooktrout RDSP/x32 or RDSP/x000 with RTNI-xATI style boards. Make this choice very carefully since this choice is PERMANENT! Select the Brooktrout board type for this installation from the list. Use the arrow keys to make a selection; then...
Page 56
44 Installing [email protected]/DOS [email protected]/DOS can be installed as a networked Voice Server, integrated with a local area network (LAN), or as a stand-alone system. If you elect the Voice Server installation, you must have a properly set NE2000 compatible Ethernet LAN adaptor installed in this machine prior to installing this software. [If you install the LAN adaptor, it MUST be set for IRQ 10 and I/O...
Page 57
Chapter 5: Installing Amanda Software 45 Since this is a new installation, a new CONFIG.SYS file will be created; you do not need to take any action yourself. Press [Esc] to quit, any other key to continue ... Checking your computer for the proper components and conflicts . . ....
Page 58
46 Installing [email protected]/DOS Please note that you have the following additional components . . . Serial port COM1 at address : 1016 Serial port COM2 at address : 760 Serial port COM3 at address : 744 Parallel port LPT1 at address: 888 Video Adaptor Card type : VGA (Video Graphics Array) Video Monitor Display type : Color Available disk space : 176295936 Press [Esc] to quit, any other...
Page 59
Chapter 5: Installing Amanda Software 47 If you selected a networked Voice Server installation, you will also be asked to install the MS-NETWORK files required to connect your [email protected]/DOS Voice Server to the network. You will be asked to remove the disk labeled “Microsoft Workgroup Add-On for MS-DOS, Disk 1 - Setup” from its sealed envelope and insert it in your floppy disk drive. Opening the sealed envelope indicates your acceptance of the Microsoft software license terms shown on the...
Page 60
48 Installing [email protected]/DOS Updating Amanda If you are upgrading Amanda software, the installation screens are somewhat different from the new installation described above. Follow the directions on the screen, and the installation process should go smoothly. If the installation program recommends changes to your CONFIG.SYS file, you need to make these changes yourself. The installation program does NOT create a new CONFIG.SYS file for you because commands you added or changed to run your...