Home > Amanda > Communications System > Amanda Telephone Switches Instructions Manual

Amanda Telephone Switches Instructions Manual

Here you can view all the pages of manual Amanda Telephone Switches Instructions Manual. The Amanda manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 91

Chapter 10:
Programming the Samsung DCS 2.2/
Compact
Getting Started
You can program the Samsung DCS 2.2/Compact from any LCD 12B or 24B keyset.
To begin programming:
1. Press TRSF.
The display shows:
2. Dial 800 as in the following:
The display shows:
3. Dial the passcode. The default passcode is 4321.
The display shows:
4. Press the up arrow once to change from Disable Tenant to Enable Tenant.
The display shows:
5. Press TRSF to redisplay the date and time.
Now you can begin programming. Follow the...

Page 92

84 Telephone Switching Systems for Amanda@SOHO
Using the Keys on the Telephone
The following figure shows the special key functions.
Programming MMC: 207
You use MMC: 207 to create a VM/AA (Voice Mail/Automated Attendant) port. Because 
you must program MMC: 207 for each Amanda port, you will perform the following steps 
from 1 to 4 times.
VM/AA ports receive the digits designated in MMC 726 VM/AA Options and also 
receive a true disconnect signal when a call is completed. Only SLI (Subscribers Line...

Page 93

Chapter 10: Programming the Samsung DCS 2.2/Compact 85
When programming MMC: 207, you use the following program keys:
To create a VM/AA port:
1. Press TRSF then dial 207.
The display shows a station number, followed by VMAA PORT and the default value 
NORMAL PORT:
2. Do one of the following:
 Dial station number (for example, 209).
OR
 Press UP or DOWN to select a station number. Then press the RIGHT soft key to 
move the cursor to NORMAL PORT:
If you picked station 209 (as in the example), the display...

Page 94

86 Telephone Switching Systems for Amanda@SOHO
4. Do one of the following:
 Press TRSF to store and exit.
OR
 Press SPK to store and advance to the next MMC.
Programming MMC: 726
You use MMC: 726 to set a series of VM/AA Options. There are eight main options for 
programming and several sub-options. Many of them are YES/NO. Others require a few 
numbers or letters of the alphabet. While you use the default settings in almost all cases, it 
is best to check that the settings are the ones they are...

Page 95

Chapter 10: Programming the Samsung DCS 2.2/Compact 87
d. Press UP to go to the next option.
e. Go on to the next numbered step.
2. The display shows:
Follow the directions given in step 1, depending on whether the setting is as shown or 
not as shown.
3. The display shows:
Follow the directions given in step 1, depending on whether the setting is as shown or 
not as shown.
4. The display shows:
Follow the directions given in step 1, depending on whether the setting is as shown or 
not as shown.
5. The...

Page 96

88 Telephone Switching Systems for Amanda@SOHO
If the setting is as shown above:
a. Press the RIGHT softkey to move the cursor to the bottom line of the display.
b. Go on to step 8.
If the setting is not as shown above:
a. Press the RIGHT softkey to move the cursor to the bottom line of the display.
b. Press *. 
c. Go on to step 8.
8. Press UP for the next option.
The display shows:
9. If # is not already the setting, press the RIGHT softkey to move the cursor to the bot-
tom line of the display. Then...

Page 97

Chapter 10: Programming the Samsung DCS 2.2/Compact 89
17. If 6 is not already the setting, press the RIGHT softkey to move the cursor to the bot-
tom line of the display. Then press 6.
18. Press UP for the next option.
The display shows:
19. If # is not already the setting, press the RIGHT softkey to move the cursor to the bot-
tom line of the display. Then press #.
20. Press UP for the next option.
The display shows:
21. If # is not already the setting, press the RIGHT softkey to move the cursor to the...

Page 98

90 Telephone Switching Systems for Amanda@SOHO
They should be as displayed below:
26. Do one of the following:
 Press TRSF to store and exit.
OR
 Press SPK to store and advance to the next MMC.PROGRESS TONE ID
BUSY TONE:4
PROGRESS TONE ID
RINGBACK TONE:5
PROGRESS TONE ID
DND NO MORE:6
PROGRESS TONE ID
HDSET ANSWER:3
PROGRESS TONE ID
SPKER ANSWER:3
MMC: 726 VM/AA Options
Option
What to Use 
for Amanda
Description
EXT FOR DN1
(option 0)YESYES or NO. Determines whether the switch forwards DTMF informa-...

Page 99

Chapter 10: Programming the Samsung DCS 2.2/Compact 91
Notification and Integration Files
For each telephone switching system, Amanda@SOHO stores files with notification, dial 
code, and integration information. When you select a telephone switching system, 
Amanda knows which files to use for your switch. The files contain:
 The tokens that turn the message waiting light on are in c:\amanda\pbx.db\220.on.
This file contains the tokens “,41,%E”.
CALL TYPE ID
(option 6)
*
#
#
#
#
6
#
#
*
Offers several...

Page 100

92 Telephone Switching Systems for Amanda@SOHO
 The tokens that turn the message waiting light off are in 
c:\amanda\pbx.db\220.off.
This file contains the tokens “,42,%E”.
 The dial codes and integration strings used by the switch are in 
c:\amanda\pbx.db\220.pbx.
This file contains the following lines:
Samsung DCS 2.2/Compact
####################################################
# Samsung DCS                                      #
####################################################
dl_dtwait F-...
Start reading Amanda Telephone Switches Instructions Manual

Related Manuals for Amanda Telephone Switches Instructions Manual

All Amanda manuals