Amanda Telephone Switches Instructions Manual

Chapter 11: Programming the Sprint Protegé CTX 113
The Extension Application - System Call Forward Timer screen appears. 
11. You might want to adjust the time for the Forward Start Timer from its default of 20 
seconds.
12. Press Escape to exit. Press Y for Yes to confirm your exit, Y for Yes to save your 
changes. Also press Y for Yes to override the existing file.
13. From the Preset Call Forward menu, select Extension Preset Path then press Enter. 
The Please Input EXT DIR No. screen appears. 
It is...

114 Telephone Switching Systems for Amanda@SOHO
The Extension Application - Extension Preset Forward Path screen for that extension 
appears. 
Each telephone can have three separate paths. Under Forward Path A, enter the num-
ber 1. The Path Name will automatically indicate VMAIL due to previous program-
ming.
15. Press Escape to exit. Press Y for Yes to confirm your exit, Y for Yes to save your 
changes. Also press Y for Yes to override the existing file.
16. From the Preset Call Forward menu, select...

Chapter 11: Programming the Sprint Protegé CTX 115
The Extension Application - Extension Preset Forward Table screen for that extension 
appears. 
18. Enter the extension number to be programmed to automatically call forward.
19. Under Path A, selecting Y in the rows for ICM, Transferred, DND, No Answer, Day, 
and Night is recommended. This way intercom or transferred calls day or night are 
sent to voice mail after the Forward timer expires with No Answer or immediately if 
the telephone has activated...

116 Telephone Switching Systems for Amanda@SOHO
Setting Up the Ringing
To set up the ringing for the system:
1. From the Database Programming menu, select C.O. Line then press Enter.
The C.O. Line menu appears. 
2. Select Ringing Position then press Enter. 
The C.O. Line - Ringing Position screen appears 
3. Select the C.O. Line number to be programmed for ringing then press Enter to enter 
the Day/Night part of the screen.
4. In the Day1 column, you can enter up to six different extension or hunt group...

Chapter 11: Programming the Sprint Protegé CTX 117
5. To program C.O. Line 1 to ring at the operator during the day and to the auto atten-
dant at night, enter extension 201 in the Day1 column of C.O. Line 1 (DIR# 748) and 
431 in the Night column of line 1. (The pilot number of the Auto Attendant UCD 
Hunt Group as previously programmed is 431) To make the Auto Attendant back up 
the live operator during the normal Day ringing mode, you enter 431 in the Alt. Day 
column. 
N
OTE:The timing for the...

118 Telephone Switching Systems for Amanda@SOHO
This file contains the tokens “-#*96,%E”.
 The dial codes and integration strings used by the switch are in 
c:\amanda\pbx.db\230.pbx.
This file contains the following lines:
Sprint CTX/MTX
####################################################
# Sprint CTX/MTX                                   #
####################################################
dl_dtwait F-         # Dial code to put a caller on transfer hold         :
dl_ndtret F-         # Dial code to...

Chapter 12:
Programming the Toshiba DK Series
Getting Ready
The Toshiba DK-8 can have only 2 single-line voice mail ports. The hardware you need to 
provide voice mail includes all of the following:
 1 DTMF Receiver Card QRCU
 1 Single-Line (Analog) Station Card QSTU
The DK-16 and DK-16e can support all four Amanda ports. The hardware needed 
includes all of the following:
 1 DTMF Receiver Card K4RCU
 1 Single-Line (Analog) Station Card KSTU (or RCTU)
You also need a 20-button Toshiba telephone set...

120 Telephone Switching Systems for Amanda@SOHO
Toshiba DK-16 and DK-16e
Coding for the Single-line Station Cards
Program 03 supports flexible PCB cabinet and slot assignments. Use it to code your 
single-line station cards.
To code the single-line station cards, do Program 03:
1. Dial *#*#1*2*3.
2. Press Spkr.
3. Dial 03.
4. Press Hold.
5. Press Spkr.
6. Dial 00. 

Chapter 12: Programming the Toshiba DK Series 121
7. Dial 92.
(The telephone is either displaying 92 or you have to change what is displayed to 92.)
8. Press Hold.
9. Press Spkr.
10. Dial ##.
11. Press  H old.
The telephone system’s power must be recycled after running program 03.
12. Press Spkr.
13. Dial ##.
14. Press Hold.
Managing Message Waiting Lights
Only Amanda should be able to turn message waiting lights on and off.
To ensure that only Amanda lights these lights, do Program 10-2:
1. Dial...

122 Telephone Switching Systems for Amanda@SOHO
4. Press Hold.
5. Press Spkr.
6. Do one of the following:
 On a DK-8, dial 008*009.
This represents ports 8 and 9, and, therefore, extensions 18 and 19.
 On a DK-16 or DK-16e, dial 008*011.
This represents ports 8 through 11, and, therefore, extensions 18 through 21.
7. Make sure that the following LEDs are ON:
5, 9, 15, 16, 17, 18, 19, 20
All others must be OFF.
8. Press Hold.
Notification and Integration Files
For each telephone switching system,...