Amanda Telephone Switches Instructions Manual

Chapter 4: Programming the Comdial Unisyn 33
6. Select the station ports to be programmed by dialing the station port number or press-
ing the A1 to A16 buttons.
7. Dial * when all the station ports have been selected.
8. Dial ** to finish but stay in configuration mode.
To program delayed ringing:
1. If you are not already in configuration mode, dial ITCM *#746*.
2. Dial 54 “STA/LINE CONFIG”.
3. Dial 2 “DELAY RING”.
4. Select the line ports (1 through 6) for direct ringing by dialing 01 through 06 or...

34 Telephone Switching Systems for Amanda@SOHO
6. Select the station ports to be programmed by dialing the station port number or press-
ing the A1 to A16 buttons.
7. Dial * when all the station ports have been selected.
8. Dial ** to finish but stay in configuration mode.
N
OTE:The hunt group procedure (below) is not used when the system is in night 
mode. You must program lines 1 through 4 to ports 1 through 4.
Assigning Voice Mail Ports to a Hunt Group
You must assign all voice mail ports to a...

Chapter 4: Programming the Comdial Unisyn 35
The Comdial Unisyn manual skips a step needed when you set up call forwarding, so use 
the following procedure.
To program call forwarding:
1. If you are not already in configuration mode, dial ITCM *#746*.
2. Dial 53 “STATION FEATURES”.
3. Dial 21 “CALL FWD RNA”.
4. Dial 1 through 9 for the number of rings before forwarding.
5. Select the station ports by pressing the A1 to A16 buttons.
6. Press ** to return to configuration mode.
7. Dial 16 (How Internal...

36 Telephone Switching Systems for Amanda@SOHO
 Group 1 = Dial 9 or Dial 0
 Group 2 = Dial 81
 Group 3 = Dial 82
 Group 4 = Dial 83
Assigning line group automatically arranges the system for hybrid operation, which may 
incur a higher monthly tariff than the key system operation incurs. Ask the local telephone 
company for details.
To program line groups:
1. If you are not already in configuration mode, dial ITCM *#746*.
2. Dial 35 “ASSIGN LINE GRPS”.
3. Dial 1 for Group 1.
4. Select line ports to be...

Chapter 4: Programming the Comdial Unisyn 37
To program message waiting light for voice mail ports:
1. If you are not already in configuration mode, dial ITCM *#746*.
2. Dial 53 “STATION FEATURES”.
3. Dial 06 for “MSG. WAIT ORIG.”.
4. Select the station ports to be assigned this feature by dialing 10 through 25 or A1 
through A16. (The station is assigned if the LED is on.)
5. Dial * to assign stations to another prime line or ** to finish but stay in configuration 
mode.
Setting Up Ringing Line...

38 Telephone Switching Systems for Amanda@SOHO
3. Dial one of the following:
1 for 30 sec. 6 for 240 sec.
2 for 60 sec. 7 for 300 sec.
3 for 90 sec. 8 for 360 sec.
4 for 120 sec. 9 for 420 sec.
5 for 180 sec. 0 for 0 sec.
4. Dial * to finish but stay in configuration mode.
Using Unanswered Call Transfer Recall
When a call is transferred to a station and the station does not answer, you will probably 
want the call to go into the station’s mailbox. If the call returns to the transferring station 
instead...

Chapter 4: Programming the Comdial Unisyn 39
5. Dial the number of the first voice mail port.
6. Dial *** to finish but stay in configuration mode.
To program the line to delay ring to the voice mail system:
1. If you are not already in configuration mode, dial ITCM *#746*.
2. Dial 54 “STA/LINE CONFIG”.
3. Dial 2 “DELAY RING”.
4. Press the line button (B1 through B6) for the private line. (In the example, you would 
have pressed B3 for line 3.)
5. Press #.
6. Dial the station number plus 2 (in this...

40 Telephone Switching Systems for Amanda@SOHO
 The dial codes and integration strings used by the switch are 
c:\amanda\pbx.db\121.pbx for two-digit extensions and 
c:\amanda\pbx.db\122.pbx for three-digit extensions.
121.pbx contains the following lines:
####################################################
# Comdial DSU/Unison, 2-digit dial plan            #
####################################################
dl_dtwait F,         # Dial code to put a caller on transfer hold         :
dl_ndtret F-...

Chapter 4: Programming the Comdial Unisyn 41
integration 10 ‘rrr3’
integration 10 ‘eee0’
integration 10 ‘9*eee’
integration 10 ‘rrr’ 

42 Telephone Switching Systems for Amanda@SOHO