Xerox WorkCentre 5740 User Manual
Here you can view all the pages of manual Xerox WorkCentre 5740 User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 101
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide101 Configure FTP This page allows you to set the File Transfer Protocol (FTP) mode when FTP is selected as the protocol to be used for network filing services. The following features use network filing services: •Workflow Scanning •Reprint Saved Jobs •Software Upgrades Note:To configure this feature or these settings access the Properties tab as a System Administrator. For details, refer to Access Internet...
Page 102
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide 102 SNMP (Simple Network Management Protocol) The System Administrator uses this page to enable or disable Simple Network Management Protocol (SNMP). You can also enable or disable Authentication Failure Generic Traps on the device. SNMPv3 can be enabled to create an encrypted channel for secure device management. SNMP is a set of protocols designed to help manage complex networks. SNMP compliant devices...
Page 103
![Page 103
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide103
5. In the Authentication Failure Generic Traps area, check the [Enable] checkbox to enable
Authentication Failure Generic Traps to generate a trap for every SNMP request by the device
which contains an invalid community name.
Note:When the Authentication Failure Generic Trap is enabled, this machine will generate a trap
for every SNMP request that is received by the machine which contains an invalid...](http://img.usermanuals.tech/thumb/82/38102/w300_Xerox_WorkCentre_5740-102.png "Page 103
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide103
5. In the Authentication Failure Generic Traps area, check the [Enable] checkbox to enable
Authentication Failure Generic Traps to generate a trap for every SNMP request by the device
which contains an invalid community name.
Note:When the Authentication Failure Generic Trap is enabled, this machine will generate a trap
for every SNMP request that is received by the machine which contains an invalid...")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide103 5. In the Authentication Failure Generic Traps area, check the [Enable] checkbox to enable Authentication Failure Generic Traps to generate a trap for every SNMP request by the device which contains an invalid community name. Note:When the Authentication Failure Generic Trap is enabled, this machine will generate a trap for every SNMP request that is received by the machine which contains an invalid...
Page 104
![Page 104
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 104
b. If you want to reset to the default Password, click on the [Reset] button.
Note:This account allows Xerox Clients and Drivers a limited amount of access to objects on the
device. If the device does not have SNMP v1/v2c enabled, and does not have this account
enabled, Xerox SNMP based clients will not be able to communicate with it. The default passwords
should be used, unless the passwords have been...](http://img.usermanuals.tech/thumb/82/38102/w300_Xerox_WorkCentre_5740-103.png "Page 104
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 104
b. If you want to reset to the default Password, click on the [Reset] button.
Note:This account allows Xerox Clients and Drivers a limited amount of access to objects on the
device. If the device does not have SNMP v1/v2c enabled, and does not have this account
enabled, Xerox SNMP based clients will not be able to communicate with it. The default passwords
should be used, unless the passwords have been...")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide 104 b. If you want to reset to the default Password, click on the [Reset] button. Note:This account allows Xerox Clients and Drivers a limited amount of access to objects on the device. If the device does not have SNMP v1/v2c enabled, and does not have this account enabled, Xerox SNMP based clients will not be able to communicate with it. The default passwords should be used, unless the passwords have been...
Page 105
![Page 105
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide105
•Printer Traps
•Job Monitoring Traps
•Cold Start Generic Traps
•Warm Start Generic Traps
•Authentication Failure Generic Traps (Status: Enabled)
Note:When Authentication Failure Generic Traps is disabled, traps of this type will not be sent
by this device. To enable Authentication Failure Generic Traps, go to SNMP Properties from the
main SNMP Configuration page.
8. Click on the [Save] button to save...](http://img.usermanuals.tech/thumb/82/38102/w300_Xerox_WorkCentre_5740-104.png "Page 105
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide105
•Printer Traps
•Job Monitoring Traps
•Cold Start Generic Traps
•Warm Start Generic Traps
•Authentication Failure Generic Traps (Status: Enabled)
Note:When Authentication Failure Generic Traps is disabled, traps of this type will not be sent
by this device. To enable Authentication Failure Generic Traps, go to SNMP Properties from the
main SNMP Configuration page.
8. Click on the [Save] button to save...")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide105 •Printer Traps •Job Monitoring Traps •Cold Start Generic Traps •Warm Start Generic Traps •Authentication Failure Generic Traps (Status: Enabled) Note:When Authentication Failure Generic Traps is disabled, traps of this type will not be sent by this device. To enable Authentication Failure Generic Traps, go to SNMP Properties from the main SNMP Configuration page. 8. Click on the [Save] button to save...
Page 106
![Page 106
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 106
•Authentication Failure Generic Traps (Status: Enabled)
Note:When Authentication Failure Generic Traps is disabled, traps of this type will not be sent
by this Device. To enable Authentication Failure Generic Traps, go to SNMP Properties from the
main SNMP Configuration page.
5. Click on the [Save] button to save settings and return to the Advanced Settings page.
6. Click on the [Back] button to return...](http://img.usermanuals.tech/thumb/82/38102/w300_Xerox_WorkCentre_5740-105.png "Page 106
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 106
•Authentication Failure Generic Traps (Status: Enabled)
Note:When Authentication Failure Generic Traps is disabled, traps of this type will not be sent
by this Device. To enable Authentication Failure Generic Traps, go to SNMP Properties from the
main SNMP Configuration page.
5. Click on the [Save] button to save settings and return to the Advanced Settings page.
6. Click on the [Back] button to return...")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide 106 •Authentication Failure Generic Traps (Status: Enabled) Note:When Authentication Failure Generic Traps is disabled, traps of this type will not be sent by this Device. To enable Authentication Failure Generic Traps, go to SNMP Properties from the main SNMP Configuration page. 5. Click on the [Save] button to save settings and return to the Advanced Settings page. 6. Click on the [Back] button to return...
Page 107
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide107 SSDP (Simple Service Discovery Protocol) Allows you to configure the SSDP (Simple Service Discovery Protocol) for Universal Plug and Play settings on the device. SSDP provides a mechanism where by network clients, with little or no static configuration, can discover network services. SSDP accomplishes this by providing for multicast discovery support as well as server based notification and discovery...
Page 108
![Page 108
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 108
Microsoft Networking
Configure Microsoft Networking
Note:To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to Access Internet Services as System Administrator on page 24.
1. From the Properties tab, click on the [Connectivity] link.
2. Click on the [Protocols] link.
3. Select [Microsoft Networking] in the directory tree.
4. In the General...](http://img.usermanuals.tech/thumb/82/38102/w300_Xerox_WorkCentre_5740-107.png "Page 108
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 108
Microsoft Networking
Configure Microsoft Networking
Note:To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to Access Internet Services as System Administrator on page 24.
1. From the Properties tab, click on the [Connectivity] link.
2. Click on the [Protocols] link.
3. Select [Microsoft Networking] in the directory tree.
4. In the General...")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide 108 Microsoft Networking Configure Microsoft Networking Note:To configure this feature or these settings access the Properties tab as a System Administrator. For details, refer to Access Internet Services as System Administrator on page 24. 1. From the Properties tab, click on the [Connectivity] link. 2. Click on the [Protocols] link. 3. Select [Microsoft Networking] in the directory tree. 4. In the General...
Page 109
![Page 109
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide109
c. Enter the IP Address in the [Secondary Server IP Address] of a Secondary Server.
Note:If DHCP is configured, WINS IP Address(es) will be overridden.
Note:WINS may be used for Address Resolution in addition to DNS. Microsoft Networking needs
to be enabled for the device to register services with WINS.
3. Click on the [Apply] button to accept the changes or [Undo] to return the settings to their
previous...](http://img.usermanuals.tech/thumb/82/38102/w300_Xerox_WorkCentre_5740-108.png "Page 109
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide109
c. Enter the IP Address in the [Secondary Server IP Address] of a Secondary Server.
Note:If DHCP is configured, WINS IP Address(es) will be overridden.
Note:WINS may be used for Address Resolution in addition to DNS. Microsoft Networking needs
to be enabled for the device to register services with WINS.
3. Click on the [Apply] button to accept the changes or [Undo] to return the settings to their
previous...")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide109 c. Enter the IP Address in the [Secondary Server IP Address] of a Secondary Server. Note:If DHCP is configured, WINS IP Address(es) will be overridden. Note:WINS may be used for Address Resolution in addition to DNS. Microsoft Networking needs to be enabled for the device to register services with WINS. 3. Click on the [Apply] button to accept the changes or [Undo] to return the settings to their previous...
Page 110
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide 110 LPR/LPD This page allows the System Administrator to select and edit LPR/LPD (Line Printer Remote/Line Printer Daemon) options. LPR/LPD is a common TCP/IP printing protocol in Unix environment to establish connections between the device and the workstations on a network. Note:TCP/IP and HTTP should have been initially configured, refer to Enable TCP/IP and HTTP at the Device on page 19 of this guide and...