Xerox WorkCentre 3045 Service Manual

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 3-27Image Quality
3Inspect the Registration Roller and 
the Registration Pinch Roller for wear 
or damage.
Is either part worn or damaged?Replace the 
Registration 
Roller 
(page 4-27), 
then go to 
Step 6.Go to Step 4.
4Does the image print correctly? Complete. Go to Step 5.
5Replace the Feed Roller (page 4-17).
Does the image print correctly?Complete. Go to Step 6.
6Replace the Separator Pad 
(page 4-74).
Does the image print...

3-28 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Image Quality
Unfused Image 
The image is not completely fused to the paper. The image easily rubs off.
Wa rn i n g
Allow the Fuser to cool before servicing the printer.
Initial Actions
• Check the media path.
• Check the Fuser connection.
Tro u b l e s h o ot i n g  Re fe re n c e Ta b l e
Applicable Parts Example Print
■Fuser, PL5.1.1
■MCU Board, PL7.1.3
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1Check the...

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 3-29Image Quality
Incorrect Magnification
Incorrect magnification when copying with the ADF feeding.
Initial Actions
• Check the paper transfer path.
• Ensure there are no debris on the transfer path.
Tro u b l e s h o ot i n g  Re fe re n c e Ta b l e
Applicable Parts Example Print
■Scanner Assembly (3045NI) 
PL8.1.1
■Scanner Assembly (3045B) PL8.2.1
Troubleshooting Procedure
Step Actions and Questions Yes No
1Check media condition.
Is the...

3-30 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Image Quality
ADF Lines or Streaks
There are lines or streaks on copies from the ADF.
Initial Actions
• Check the document glass.
• Ensure there are no debris on the document glass.
Tro u b l e s h o ot i n g  Re fe re n c e Ta b l e
Applicable Parts Example Print
■Scanner Assembly (3045NI) 
PL8.1.1
■Scanner Assembly (3045B) PL8.2.1
Troubleshooting Procedure
Step Actions and Questions Yes No
1Check the output document.
Are there...

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 3-31Image Quality
Spots from ADF
There are spots on copies from the ADF.
Initial Actions
• Check the document glass.
• Ensure there are no debris on the document glass.
Tro u b l e s h o ot i n g  Re fe re n c e Ta b l e
Applicable Parts Example Print
■Scanner Assembly (3045NI) 
PL8.1.1
■Scanner Assembly (3045B) PL8.2.1
Troubleshooting Procedure
Step Actions and Questions Yes No
1Check the original document. 
Are there spots on the...

3-32 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Image Quality
Te s t  P r i n t s
A variety of test prints are available for troubleshooting print quality defects and 
to confirm proper printer operation. Test Prints can isolate printing problems to the 
MCU or Image Processor Board by using on board image data to isolate the two 
boards. Test prints are also useful for stimulating asynchronous (dynamic) events 
related to the print process, or as a test for media path and media...

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 3-33Image Quality
Te s t P a t A S I C [ I O T ]  Te s t  P r i n t
Prints theprint engine test pattern.
If the pattern does not print correctly, check the 
MCU Board. If the pattern prints OK, check the 
Image Processor Board.
Te s t P a t L P H [ I O T ]  Te s t  P r i n t
Prints the IP Board grid pattern. 
Compare the print with the sample. If the test print 
does not match the test print shown here, check the 
MCU Board. If the test...

3-34 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Image Quality
Image Specifications
The following table lists specifications for the printer.
Note
The printed image has 4.1 mm margins on all sides.
 
CharacteristicSpecification
Maximum Print Area 215.9 mm x 355.6 mm (8.5 inches x 14 inches)
Guaranteed Print Area 215.9 mm x 355.6 mm (8.5 inches x 14 inches)
Skew
Main Paper Tray (A4)
Main Paper Tray (LTR)
Bypass Tray (A4)
Bypass Tray (LTR)180 mm ± 1.4 mm
200 mm ± 1.5 mm
180 mm ±...

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 3-35Image Quality
Guaranteed Print Areas
• Maximum Print Area: 215.9 mm x 355.6 mm
Guaranteed and Maximum Area
4 mm
4 mm4 mm
4 mm
355.6 mm
(14 inch)
215.9 mm
(8.5 inch)351.6 mm
347.6 mm
210.9 mm Guaranteed Printing Area
207.9 mm 

3-36 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Image Quality