Xerox Phaser 6180N User Manual

							Printing on Specialty Media
Phaser® 6180 Color Laser Printer
4-28
Printing on Envelopes
When MPT Mode is set to Panel Specified, you need to set the paper type and size settings 
for the tray on the control panel in advance. See Setting Paper Types and Sizes on page 4-7.
The way to display the printer Properties dialog box differs according to the application 
software. Refer to the manual of your respective application software.
Using the PostScript Driver
To print on envelopes using the PostScript print driver, display the Paper/Output tab.
1.From the File menu, select Print.
2.Select this printer as the printer to be used and click Preferences to display the Properties 
dialog box.
3.Select the Paper/Output tab.
4.From Paper Type, select Envelope.
5.From Paper Tray, select Tray 1 (MPT).
6.From Paper Size, select the size of the original document.
7.Click OK.
Using the PCL Driver
To print on envelopes using the PCL print driver, display the Paper/Output tab.
1.From the File menu, select Print.
2.Select this printer as the printer to be used and click Preferences to display the Properties 
dialog box.
3.Select the Paper/Output tab.
4.From Paper Tray, select Tr a y 1 (MPT).
5.Select the appropriate paper type from Paper Type for Tray 1 (MPT) and click OK.
6.From Paper Size, select the size of the original document.
7.Select the Layout tab.
8.From Output Size, select the size of the envelope, and then click OK.
9.If the envelopes are loaded in Tray 1 (MPT), click Booklet/Poster/Mixed 
Document/Rotation to display the Booklet/Poster/Mixed Document/Rotation dialog 
box according to what you need.
10.Set Image Rotation 180deg if necessary, and then click OK.
11.Click OK.
12.Click Print in the Print dialog box to start printing.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing on Specialty Media
Phaser® 6180 Color Laser Printer
4-29
Printing Labels
Labels can be printed from all trays.
To order paper, transparencies, or other specialty media, contact your local reseller or go to 
www.xerox.com/office/6180supplies
.
See also: 
About Paper on page 4-5
Guidelines
■Do not use vinyl labels.
■Print only on one side of the sheet of labels.
■Do not use any sheet where labels are missing; it may damage the printer.
■Store unused labels flat in their original packaging. Leave the sheets of labels inside the 
original packaging until ready to use. Return any unused sheets of labels to the original 
packaging and reseal it.
■Do not store labels in extremely dry or humid conditions or extremely hot or cold 
conditions. Storing them in extreme conditions may cause print-quality problems or cause 
them to jam in the printer.
■Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to 
curl and jam the printer.
Printing Labels from Tray 1 (MPT)
1.Gently pull open the Tray 1 (MPT) cover and open the paper guides.
6180-045
Downloaded From ManualsPrinter.com Manuals 
						

							Printing on Specialty Media
Phaser® 6180 Color Laser Printer
4-30 2.Fan the labels to release sheets that are stuck together.
3.Insert the labels into Tray 1 (MPT), and adjust the paper guides to fit the sheets.
■Place the side to be printed facedown with the top of the sheets entering first.
■Do not load more than 25 sheets.
4.In the printer driver, select either Labels as the paper type or Tr a y 1 (MPT) as the paper 
tray.
5.If the printer is set to Panel Specified, the control panel asks for media type and size.
6180-015
6180-046
Downloaded From ManualsPrinter.com Manuals 
						

							
Printing on Specialty Media
Phaser® 6180 Color Laser Printer 4-31
Printing Labels from Trays 2–3
1.Pull the tray out of the printer.
2. If necessary, open the paper guides:
■Squeeze the green tab on the length guide,  and then slide the tray until the arrow lines 
up with the appropriate paper size. The guide clicks into place.
■Slide the green side guides outward.
6180-012
6180-047
Downloaded From ManualsPrinter.com Manuals 
						

							Printing on Specialty Media
Phaser® 6180 Color Laser Printer
4-32 3.Fan the label sheets to release sheets that are stuck together.
4.Insert the label sheets into the tray. Place the side to be printed faceup with the top of the 
page toward the front of the printer.
Note:Do not load the paper above the fill line indicated on the tray. Overloading the tray 
may cause jams. The following illustration indicates the maximum fill line for 
transparencies, labels, and glossy paper.
6180-015
6180-048
Downloaded From ManualsPrinter.com Manuals 
						

							Printing on Specialty Media
Phaser® 6180 Color Laser Printer
4-33 5.If necessary, press the paper guides inward to fit the sheets.
Note:When the paper guides are adjusted correctly, there may be a small space between 
the labels and the guides.
6.Insert the tray into the tray slot, and push the tray completely into the printer.
7.On the control panel, select the paper type:
a.Select 
Tray Settings, and then press the OK button.
b.Select 
Tr a y  2  or Tr a y  3, and then press the OK button.
c.Select 
Paper Type, and then press the OK button.
d.Select 
Labels, and then press the OK button.
8.In the printer driver, select either Labels as the paper type or the appropriate tray as the 
paper tray.
6180-016
6180-017
Downloaded From ManualsPrinter.com Manuals 
						

							Printing on Specialty Media
Phaser® 6180 Color Laser Printer
4-34
Printing Glossy Paper
Glossy paper can be printed from any tray. It can be printed on both sides.
To order paper, transparencies, or other specialty media, contact your local reseller or go to 
www.xerox.com/office/6180supplies
.
Guidelines
■Do not open sealed packages of glossy paper until you are ready to load them into the 
printer.
■Leave glossy paper in the original wrapper, and leave the packages in the shipping carton 
until ready to use.
■Remove all other paper from the tray before loading glossy paper.
■Load only the amount of glossy paper you are planning to use. Do not leave glossy paper 
in the tray when you are finished printing. Reinsert unused glossy paper in the original 
wrapper and seal. 
■Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy 
paper to curl and jam the printer.
Printing Glossy Paper from Tray 1 (MPT)
1.Gently pull open the Tray 1 (MPT) cover and open the paper guides.
6180-045
Downloaded From ManualsPrinter.com Manuals 
						

							Printing on Specialty Media
Phaser® 6180 Color Laser Printer
4-35 2.Fan the glossy paper to release sheets that are stuck together.
3.Insert the glossy paper into Tray 1 (MPT), and adjust the paper guides to fit the paper.
■Place the side to be printed facedown.
■Do not load more than 25 sheets.
4.In the printer driver, select either Glossy Paper as the paper type or Tr a y 1 (MPT) as the 
paper tray.
5.If the printer is set to Panel Specified, the control panel asks for media type and size.
6180-015
6180-046
Downloaded From ManualsPrinter.com Manuals 
						

							
Printing on Specialty Media
Phaser® 6180 Color Laser Printer 4-36
Printing Glossy Paper from Trays 2–3
1.Pull the tray out of the printer.
2. If necessary, open the paper guides:
■Squeeze the green tab on the length guide,  and then slide the tray until the arrow lines 
up with the appropriate paper size. The guide clicks into place.
■Slide the green side guides outward.
6180-012
6180-047
Downloaded From ManualsPrinter.com Manuals 
						

							Printing on Specialty Media
Phaser® 6180 Color Laser Printer
4-37 3.Fan the paper to release sheets that are stuck together.
4.Insert the paper into the tray. 
Note:Do not load the paper above the fill line indicated on the tray. Overloading the tray 
may cause jams. The following illustration indicates the maximum fill line for 
transparencies, labels, and glossy paper.
6180-015
6180-048
Downloaded From ManualsPrinter.com Manuals