Xerox Phaser 6180N User Manual

							Color Registration
Phaser® 6180 Color Laser Printer
6-7
Determining Values
From the lines to the right of the Y (yellow), M (magenta), and C (cyan) pattern, find the 
values of the straightest lines.
When “0” is the value nearest the straightest line, you do not need to adjust the color 
registration. When the value is not “0”, follow the procedure outlined in “Entering Values”.
Note:You can also use the densest colors of the grid to find the straightest lines. The colors 
printed at the highest density are those next to the straightest lines.
Entering Values
Using the control panel, enter the values that you found in the Color Registration Correction 
Chart to make adjustments.
1.Press the Menu button to display the 
Menu screen.
2.Press the Up Arrow or Down Arrow button until 
Admin Menu is displayed, then press 
the Forward Arrow or OK button.
3.Press the Up Arrow or Down Arrow button until 
Maintenance Mode is displayed, then 
press the Forward Arrow or OK button.
4.Press the Up Arrow or Down Arrow button until 
Adjust ColorRegi is displayed, then 
press the Forward Arrow or OK button.
5.Press the Up Arrow or Down Arrow button until 
Enter Number is displayed, then press 
the Forward Arrow or OK button.
6.Press the Up Arrow or Down Arrow button until you reach the value displayed on the 
chart.
7.Press the Forward Arrow button once and move the cursor to the next value.
8.Repeat steps 6 and 7 to continue adjusting the color registration.
9.Press the OK button twice. The Color Registration Correction Chart is printed with the 
new values. When printing is finished, the print screen is displayed again.
10.Color registration adjustment is complete when the straightest Y (yellow), M (magenta), 
and C (cyan) lines are next to the “0” line.
If “0” is not next to the straightest lines, determine the values and adjust again.
Note:After printing the Color Registration Correction Chart, do not turn off the printer until 
the printer motor has stopped running.
Downloaded From ManualsPrinter.com Manuals 
						

							Color Registration
Phaser® 6180 Color Laser Printer
6-8
Enabling/Disabling Automatic Color Registration
Use the following procedure to enable/disable automatic color registration when a new print 
cartridge is installed.
1.Press the Menu button to display the 
Menu screen.
2.Press the Up Arrow or Down Arrow button until 
Admin Menu is displayed, and then 
press the Forward Arrow or OK button.
3.Press the Up Arrow or Down Arrow button until 
Maintenance Mode is displayed, and 
then press the Forward Arrow or OK button.
4.Press the Up Arrow or Down Arrow button until 
Auto Regi Adj is displayed, and then 
press the Forward Arrow or OK button.
5.Press the Up Arrow or Down Arrow button to turn automatic color registration 
On or Off.
Downloaded From ManualsPrinter.com Manuals 
						

							Phaser® 6180 Color Laser Printer
7-1 This chapter includes:
■Paper Jams on page 7-2
■Problems With the Printer on page 7-17
■Control Panel Error Messages on page 7-21
■Getting Help on page 7-26
See also: 
Troubleshooting video tutorials at www.xerox.com/office/6180support
Print-Quality Problems on page 6-2
Troubleshooting
Downloaded From ManualsPrinter.com Manuals 
						

							Paper Jams
Phaser® 6180 Color Laser Printer
7-2
Paper Jams
This section includes:
■Preventing and Clearing Paper Jams on page 7-2
■Paper Jams in Tray 1 (MPT) on page 7-3
■Paper Jams in the Paper Tray on page 7-6
■Paper Jams at the Fuser on page 7-9
■When Long Paper Jams on page 7-10
■Paper Jams at the Duplex Unit on page 7-11
■Paper Jams in the Optional Sheet Feeder on page 7-13
See also: 
User Safety on page 1-2
Preventing and Clearing Paper Jams
To reduce the occurrence of paper jams, follow the guidelines and instructions in Printing 
Basics on page 4-1. It includes information about supported paper and media, guides for 
usage, and instructions for properly loading paper in the trays.
Caution:When removing jammed paper, make sure that no pieces of torn paper are left in the 
printer. A piece of paper remaining in the printer can cause a fire. If a sheet of paper is 
wrapped around the heat roller, or when clearing a jammed paper that is difficult or impossible 
to see, do not try to remove it by yourself. Turn off the printer immediately, and refer to the 
Xerox Support website, www.xerox.com/office/6180support
.
Warning:The fuser and the surrounding area are hot and can cause burns.
Downloaded From ManualsPrinter.com Manuals 
						

							Paper Jams
Phaser® 6180 Color Laser Printer
7-3
Paper Jams in Tray 1 (MPT)
Follow this procedure to remove paper jammed in Tray 1 (MPT).
1.Pull the jammed paper out of Tray 1 (MPT), and remove any remaining paper from the 
tray.
2.Close Tray 1 (MPT).
3.Push up the button and open the front cover.
Warning:Some components inside the printer, such as the fuser and surrounding area, 
are hot and can cause burns.
6180-021
6180-022
Downloaded From ManualsPrinter.com Manuals 
						

							Paper Jams
Phaser® 6180 Color Laser Printer
7-4 4.Carefully remove any jammed paper in the printer. Confirm that there are no scraps of 
paper left inside.
Caution:Prolonged exposure to light may damage the print cartridge.
5.Close the front cover.
6.Remove the tray from the printer.
6180-023
6180-024
Downloaded From ManualsPrinter.com Manuals 
						

							Paper Jams
Phaser® 6180 Color Laser Printer
7-5 7.Carefully pull out any jammed paper remaining inside the printer.
8.Insert the tray into the printer and push until it stops.
Caution:Do not use excessive force on the tray. Doing so could damage the tray or the inside 
of the printer.
6180-025
6180-017
Downloaded From ManualsPrinter.com Manuals 
						

							Paper Jams
Phaser® 6180 Color Laser Printer
7-6
Paper Jams in the Paper Tray
Follow the procedure below to remove paper jammed in the paper tray.
1.Gently remove the tray from the printer.
2.Remove all the jammed and/or creased paper from the tray.
6180-024
6180-035
Downloaded From ManualsPrinter.com Manuals 
						

							Paper Jams
Phaser® 6180 Color Laser Printer
7-7 3.If there is jammed paper remaining inside the printer, pull it out carefully to avoid tearing 
it.
4.Press the button and open the front cover. Remove any scraps of paper remaining inside 
the printer.
Caution:Prolonged exposure to light may damage the print cartridge.
Warning:Some components inside the printer, such as the fuser and surrounding area, 
are hot and can cause burns.
6180-036
6180-022
Downloaded From ManualsPrinter.com Manuals 
						

							Paper Jams
Phaser® 6180 Color Laser Printer
7-8 5.Close the front cover.
6.Insert the tray into the printer, and push until it stops.
Caution:Do not use excessive force on the tray. Doing so could damage the tray or the inside 
of the printer.
6180-027
6180-017
Downloaded From ManualsPrinter.com Manuals