Xerox DocuColor 12 User Manual

DOCUCOLOR 12 USER GUIDE4–17 BASIC COPYING
1
2
3
4
5
6
7 Auto Tray Switching
The Auto Tray Switching option enables the 
copier/printer to switch automatically to another 
tray when a tray runs out of paper, providing that 
the trays are loaded with the same size paper in 
the same orientation (long edge feed or short 
edge feed).
You can reload paper in empty trays while the 
copier/printer is running to ensure continuous 
production.
Auto Tray Switching is enabled in the Tools mode 
only for Paper Trays...

BASIC COPYING4–18 DOCUCOLOR 12 USER GUIDE
1
2
3
4
5
6
7 Selecting the Paper Supply
1On the Basic Copying Tab, review the displayed 
paper trays under Paper Supply to see if the 
desired paper size and type is displayed.
2Perform one of the following:
•Touch the Auto Paper option. The copier/
printer selects the appropriate paper 
automatically.
•Touch the tray that displays the appropriate 
paper. The copier/printer will use paper from 
this tray.
•Touch the More... button to display the Paper 
Supply...

BASIC COPYING4–19 DOCUCOLOR 12 USER GUIDE
1
2
3
4
5
6
7 Programming the Paper Supply for Tray 5
You must select the paper size and paper type 
when loading paper into Tray 5.
1On the Basic Copying tab under Paper Supply, 
touch the More... button to display the Paper 
Supply screen, Figure 23.
2Touch the Tray 5 icon to display the Tray 5 screen, 
Figure 24.
Figure 23: Paper Supply screen
Figure 24: Tray 5 screen
Downloaded From ManualsPrinter.com Manuals 

BASIC COPYING4–20 DOCUCOLOR 12 USER GUIDE
1
2
3
4
5
6
7
3Perform one of the following to select paper size:
•Touch International and select one of the 
preset international sizes, such as A3 or A4, 
as illustrated in Figure 25.
KEY POINT: You must select International to 
access the Postcard size option.
•Touch Inch Sizes and select one of the 
standard US sizes, such as 8.5 x 11 or 11 x 17 
inches, as illustrated in Figure 26.
•Touch Non Standard Sizes and enter the X 
(width) and Y (length) dimensions...

BASIC COPYING4–21 DOCUCOLOR 12 USER GUIDE
1
2
3
4
5
6
7
Downloaded From ManualsPrinter.com Manuals 

BASIC COPYING4–22 DOCUCOLOR 12 USER GUIDE
1
2
3
4
5
6
7
Downloaded From ManualsPrinter.com Manuals 

DOCUCOLOR 12 USER GUIDE5–1 ADDED FEATURES
1
2
3
4
5
6
7
5. Added Features
Overview
Figure 1: Added Features Tab
Use the Added Features tab (Figure 1) to 
select options for the features described 
below.
2 Sided Copying
The 2 Sided Copying feature specifies 1 to 1, 
1 to 2 (head-to-head), and 1 to 2 (head-to-toe) 
copying.
Bound Originals
The Bound Originals feature splits the image 
of an open bound original into pages to enable 
copying of each page.
Downloaded From ManualsPrinter.com Manuals 

ADDED FEATURES5–2 DOCUCOLOR 12 USER GUIDE
1
2
3
4
5
6
7 Margin Shift
The Margin Shift feature enables you to centre a 
document image, shift the image to one edge 
slightly, or move the image to a specified edge of 
the output copy.
Edge Erase
The Edge Erase feature allows you to erase any 
undesired images around the border of a 
document. Edge Erase may begin at the image 
and go out to the edge of the original document. 
Edge Erase may be also applied to any centre 
streaks caused by a gap between the...

DOCUCOLOR 12 USER GUIDE5–3 ADDED FEATURES
1
2
3
4
5
6
7 Mixed Size Originals
When the Duplex Automatic Document Feeder 
(DADF) is present, you can place documents of 
mixed sizes into the DADF for copying. When the 
Mixed Size Originals feature and Auto paper tray 
are selected, the copier/printer automatically 
identifies the document size and selects the 
correct paper supply.
KEY POINT:
•When you select a feature option other than 
the default, save your selection and then 
return to the tab, a check...

ADDED FEATURES5–4 DOCUCOLOR 12 USER GUIDE
1
2
3
4
5
6
7
2 Sided Copying
Use the 2 Sided Copying feature on the Added 
Features tab to select one or two-sided copy, with 
options for 2-sided output.
KEY POINT:The 2 Sided Copying feature is 
available for output of 16 lb. through 28 lb. (64 
through 105 gsm) paper or for standard sizes 
smaller than 12 x 18 inches (A3). Use the 
procedure “Manual 2 Sided Copying” for paper 
outside these limits.
Using the 2 Sided Copying feature
1On the Added Features tab,...