Xerox 1632 2240 3535 Color Carrera Manual

6/02
2-121 DC1632/2240
8-151
Status Indicator RAPs Prelaunch Training/Review
8-151 Tray 3 Take Away Sensor OnThe Take Away Sensor does not detect paper fed from Tray 3. Initial Actionsï Check condition and specification of paper in Tray 3.
ï Check the paper path and sensor area for obstructions.
ï Check for wear and clean the Tray2 and Tray3 Feeder Roll, Take Away Roll and the
Nudger Roll.ProcedureEnter dC330 [008-102] and press Start. Block and unblock the Take Away Sensor (PL 16.6). 
The display...

6/02
2-122DC1632/2240
8-152
Prelaunch Training/Review Status Indicator RAPs
8-152 Tray 4 Take Away Sensor OnThe Take Away Sensor does not detect paper fed from Tray 4. Initial Actionsï Check condition and specification of paper in Tray 4.
ï Check the paper path and sensor area for obstructions.
ï Check for wear and clean the Tray 4 Feeder Roll, Take Away Roll and the Nudger Roll.ProcedureEnter dC330 [008-102] and press Start. Block and unblock the Block and unblock the Take
Away Sensor (PL 16.6).  The...

6/02
2-123 DC1632/2240
8-164
Status Indicator RAPs Prelaunch Training/Review
8-164 POB SensorThe POB Sensor did not detect paper after the Registration Clutch Energized. Initial Actionsï Check condition and specification of the paper supply.
ï Check for paper on the IBT.
ï Check for obstructions in the paper feed path
ï Clean the POB Sensor.
ï Check the 2nd BTR transmission gears for breakage
ï Clean the Registration Roll and check for damage or ware.ProcedureNOTE:  Cheat the Left Cover Interlock. 
Enter...

6/02
2-124DC1632/2240
8-175
Prelaunch Training/Review Status Indicator RAPs
8-175 Registration Sensor On Jam Tray 5The Registration Sensor does not detect paper fed from the MSI. Initial Actionsï Check condition and specification of the paper supply.
ï Check for obstructions in the paper feed path
ï Clean the MSI Feed Roll and check for ware.
ï Clean the Take Away Roll and check for ware.
ï Check the drive transmissions for damage or ware.ProcedureEnter dC330 [009-104] and press Start. Block and unblock...

6/02
2-125 DC1632/2240
8-176
Status Indicator RAPs Prelaunch Training/Review
8-176 Registration Sensor On Jam Tray 1-4The Registration Sensor does not detect paper fed from each Tray. Initial Actionsï Check condition and specification of the paper supply.
ï Check for obstructions in the paper feed path
ï Clean the Take Away Roll and check for ware.
ï Check the drive transmissions for damage or ware.ProcedureEnter dC330 [008-104] and press Start.  Block and unblock the Registration Sensor.  The dis-
play...

6/02
2-126DC1632/2240
8-180
Prelaunch Training/Review Status Indicator RAPs
8-180 Registration Sensor On DuplexThe Registration Sensor does not detect paper after a duplex feed. Initial Actionsï Check condition and specification of the paper supply.
ï Check for obstructions in the paper feed path.
ï Clean the Exit Roll, Transport Roll, Wait Roll and check for ware.
ï Check the drive transmissions for damage or ware.ProcedureEnter dC330 [008-104] and press Start.  Block and unblock the Registration Sensor...

6/02
2-127 DC1632/2240
8-180, 8-181
Status Indicator RAPs Prelaunch Training/ReviewFigure 3 The Inverter Reverse Clutch
Figure 4 The Duplex Gate Solenoid
8-181 Registration Sensor On Wait SensorThe Registration Sensor does not detect paper after the Duplex Wait Sensor was energized. Initial Actionsï Check condition and specification of the paper supply.
ï Check for obstructions in the paper feed path.
ï Clean the Take Away Roll and check for ware.
ï Check the drive transmissions for damage or...

6/02
2-128DC1632/2240
8-181 
Prelaunch Training/Review Status Indicator RAPsFigure 2 The Duplex Wait Sensor
Figure 3 The Duplex Motor 

6/02
2-129 DC1632/2240
8-184
Status Indicator RAPs Prelaunch Training/Review
8-184 Registration Sensor OffThe Fuser Exit Switch did not detect paper after the Registration Clutch was energized. Initial Actionsï Check condition and specification of the paper supply.
ï Check for obstructions in the paper feed path.
ï Check the Fuser Belt and the Heat Roll for damage or ware.
ï Clean the Registration Roll and check for ware or damage.
ï Check the drive transmissions for damage or ware.ProcedureEnter dC330...

6/02
2-130DC1632/2240
8-620
Prelaunch Training/Review Status Indicator RAPs
8-620 Regicon Temp SensorEnvironment Sensor not in range.ProcedureNOTE: Machine operation continues. Status Code not displayed on UI. Status Code logged in
History.
Turn the power off. Disconnect the Environment Sensor (PL 1.3). 
Measure the resistance between the following:
ï I/F PWB P/J536-B4 and P/J255-1
ï I/F PWB P/J536-B2 and P/J255-3ï I/F PWB P/J536-B1 and P/J255-4
The Resistance is 1 ohm or less.
YN
Check the wires and...