Xerox 1632 2240 3535 Color Carrera Manual
Here you can view all the pages of manual Xerox 1632 2240 3535 Color Carrera Manual. The Xerox manuals for All in One Printer are available online for free. You can easily download all the documents as PDF.
Page 141
![Page 141
6/02
2 - 111 DC1632/2240
7-281
Status Indicator RAPs Prelaunch Training/Review
7-281 Tray 1 LiftThe Tray 1 Level Sensor does not detect tray lift.Initial ActionsCheck drive of the following:
ï Manually turn the gear at rear of the TRAY 1 to check that the Bottom Plate moves up and
down smoothly.
ï Gently push Tray 1 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-002] and press Start. The Tray 1 Feed/Lift motor energizes (PL2.4).
YN
Go to OF 99-6 Motor Open RAP.
Enter dC330...](http://img.usermanuals.tech/thumb/82/49005/w300_xerox-1632-2240-3535-color-carrera-service-manual-140.png "Page 141
6/02
2 - 111 DC1632/2240
7-281
Status Indicator RAPs Prelaunch Training/Review
7-281 Tray 1 LiftThe Tray 1 Level Sensor does not detect tray lift.Initial ActionsCheck drive of the following:
ï Manually turn the gear at rear of the TRAY 1 to check that the Bottom Plate moves up and
down smoothly.
ï Gently push Tray 1 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-002] and press Start. The Tray 1 Feed/Lift motor energizes (PL2.4).
YN
Go to OF 99-6 Motor Open RAP.
Enter dC330...")
6/02 2 - 111 DC1632/2240 7-281 Status Indicator RAPs Prelaunch Training/Review 7-281 Tray 1 LiftThe Tray 1 Level Sensor does not detect tray lift.Initial ActionsCheck drive of the following: ï Manually turn the gear at rear of the TRAY 1 to check that the Bottom Plate moves up and down smoothly. ï Gently push Tray 1 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-002] and press Start. The Tray 1 Feed/Lift motor energizes (PL2.4). YN Go to OF 99-6 Motor Open RAP. Enter dC330...
Page 142
![Page 142
6/02
2-112DC1632/2240
7-282
Prelaunch Training/Review Status Indicator RAPs
7-282 Tray 2 LiftThe Tray 2 Level Sensor does detect tray lift.Initial ActionsCheck drive of the following:
ï Manually turn the gear at rear of the Tray 2 to check that the Bottom Plate moves up and
down smoothly.
ï Gently push Tray 2 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-004] and press Start. The Tray 2 Feed/Lift motor energizes (PL16.7).
YN
Go to OF 99-6 Motor Open RAP.
Enter dC330...](http://img.usermanuals.tech/thumb/82/49005/w300_xerox-1632-2240-3535-color-carrera-service-manual-141.png "Page 142
6/02
2-112DC1632/2240
7-282
Prelaunch Training/Review Status Indicator RAPs
7-282 Tray 2 LiftThe Tray 2 Level Sensor does detect tray lift.Initial ActionsCheck drive of the following:
ï Manually turn the gear at rear of the Tray 2 to check that the Bottom Plate moves up and
down smoothly.
ï Gently push Tray 2 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-004] and press Start. The Tray 2 Feed/Lift motor energizes (PL16.7).
YN
Go to OF 99-6 Motor Open RAP.
Enter dC330...")
6/02 2-112DC1632/2240 7-282 Prelaunch Training/Review Status Indicator RAPs 7-282 Tray 2 LiftThe Tray 2 Level Sensor does detect tray lift.Initial ActionsCheck drive of the following: ï Manually turn the gear at rear of the Tray 2 to check that the Bottom Plate moves up and down smoothly. ï Gently push Tray 2 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-004] and press Start. The Tray 2 Feed/Lift motor energizes (PL16.7). YN Go to OF 99-6 Motor Open RAP. Enter dC330...
Page 143
![Page 143
6/02
2-113 DC1632/2240
7-291
Status Indicator RAPs Prelaunch Training/Review
7-291 Tray 3 LiftThe Tray 3 Level Sensor does detect tray lift.Initial Actionsï Manually turn the gear at rear of the TRAY 3 to check that the Bottom Plate moves up and
down smoothly.
ï Gently push Tray 3 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-006] and press Start. The Tray 3 Feed/Lift motor energizes (PL 16.9).
YN
Go to OF 99-6 Motor Open RAP.
Enter dC330 [007-118] and press Start. Open...](http://img.usermanuals.tech/thumb/82/49005/w300_xerox-1632-2240-3535-color-carrera-service-manual-142.png "Page 143
6/02
2-113 DC1632/2240
7-291
Status Indicator RAPs Prelaunch Training/Review
7-291 Tray 3 LiftThe Tray 3 Level Sensor does detect tray lift.Initial Actionsï Manually turn the gear at rear of the TRAY 3 to check that the Bottom Plate moves up and
down smoothly.
ï Gently push Tray 3 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-006] and press Start. The Tray 3 Feed/Lift motor energizes (PL 16.9).
YN
Go to OF 99-6 Motor Open RAP.
Enter dC330 [007-118] and press Start. Open...")
6/02 2-113 DC1632/2240 7-291 Status Indicator RAPs Prelaunch Training/Review 7-291 Tray 3 LiftThe Tray 3 Level Sensor does detect tray lift.Initial Actionsï Manually turn the gear at rear of the TRAY 3 to check that the Bottom Plate moves up and down smoothly. ï Gently push Tray 3 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-006] and press Start. The Tray 3 Feed/Lift motor energizes (PL 16.9). YN Go to OF 99-6 Motor Open RAP. Enter dC330 [007-118] and press Start. Open...
Page 144
![Page 144
6/02
2-114DC1632/2240
7-293
Prelaunch Training/Review Status Indicator RAPs
7-293 Tray 4 LiftThe Tray 4 Level Sensor does detect tray lift.Initial ActionsCheck drive of the following:
ï Manually turn the gear at rear of the TRAY 4 to check that the Bottom Plate moves up and
down smoothly.
ï Gently push Tray 4 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-008] and press Start. The Tray 4 Feed/Lift motor energizes (PL 16.11).
YN
Go to OF 99-6 Motor Open RAP.
Enter dC330...](http://img.usermanuals.tech/thumb/82/49005/w300_xerox-1632-2240-3535-color-carrera-service-manual-143.png "Page 144
6/02
2-114DC1632/2240
7-293
Prelaunch Training/Review Status Indicator RAPs
7-293 Tray 4 LiftThe Tray 4 Level Sensor does detect tray lift.Initial ActionsCheck drive of the following:
ï Manually turn the gear at rear of the TRAY 4 to check that the Bottom Plate moves up and
down smoothly.
ï Gently push Tray 4 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-008] and press Start. The Tray 4 Feed/Lift motor energizes (PL 16.11).
YN
Go to OF 99-6 Motor Open RAP.
Enter dC330...")
6/02 2-114DC1632/2240 7-293 Prelaunch Training/Review Status Indicator RAPs 7-293 Tray 4 LiftThe Tray 4 Level Sensor does detect tray lift.Initial ActionsCheck drive of the following: ï Manually turn the gear at rear of the TRAY 4 to check that the Bottom Plate moves up and down smoothly. ï Gently push Tray 4 in to check the drive transmission is firmly engaged.ProcedureEnter dC330 [008-008] and press Start. The Tray 4 Feed/Lift motor energizes (PL 16.11). YN Go to OF 99-6 Motor Open RAP. Enter dC330...
Page 145
6/02 2-115 DC1632/2240 7-397 Status Indicator RAPs Prelaunch Training/Review 7-397 All Trays Lift SensorsAll the Tray Level Sensors did not energize.ProcedureCheck the dC122 Shutdown History. 007-281, 007-282, 007-283, 007-284, 007-291, or 007- 293 fault has occurred. YN Replace the following in sequence: ï Tray Module PWB (PL 15.9) (PL 16.15) ï MCU PWB (PL 13.1) (TRAY 1 only) Go to the appropriate RAP.
Page 146
6/02 2-116DC1632/2240 7-930 Prelaunch Training/Review Status Indicator RAPs 7-930 Tray 1 Paper Size MismatchThe paper in Tray 1 does not match the paper size selected.ProcedureThe correct size paper is loaded in Tray 1. YN Load the correct size paper. Go to (RAP7-270).
Page 147
6/02 2-117 DC1632/2240 7-931, 7-932 Status Indicator RAPs Prelaunch Training/Review 7-931 Tray 2 Paper Size MismatchThe paper in Tray 2 does not match the paper size selected.ProcedureThe correct size paper is loaded in Tray 2. YN Ensure Paper Guides are correctly adjusted. Load the correct size paper. Go to (RAP7-271). 7-932 Tray 3 Paper Size MismatchThe paper in Tray 3 does not match the paper size selected.ProcedureThe correct size paper is loaded in Tray 3. YN Ensure Paper Guides are correctly...
Page 148
6/02 2-118DC1632/2240 7-933, 7-935 Prelaunch Training/Review Status Indicator RAPs 7-933 Tray 4 Paper Size MismatchThe paper in Tray 4 does not match the paper size selected.ProcedureThe correct size paper is loaded in Tray 4. YN Ensure Paper Guides are correctly adjusted. Load the correct size paper. Go to (RAP7-277). 7-935 Job Continue Not AvailableAutomatic Tray switching cannot be continued because a tray was not programed.ProcedureProgram the appropriate tray. The problem continues. YN Return to...
Page 149
6/02 2-119 DC1632/2240 7-954, 7-959 Status Indicator RAPs Prelaunch Training/Review 7-954 SMH Size Mismatch (Slow Scan Direction)The paper in the slow scan direction is shorter than the specified paper size.ProcedureThe correct size paper is loaded in the SMH. YN Load the correct size paper. Replace the Registration Sensor. (PL 2.6). 7-959 Tray 5 Paper Mismatch 1Other than dedicated stock is detected by the OHP sensor.Initial Actionsï Ensure that dedicated stock is used. ï Check that the transparencies...
Page 150
6/02 2-120DC1632/2240 7-960, 7-969 Prelaunch Training/Review Status Indicator RAPs 7-960 Tray 5 Paper Mismatch 2 A different paper type or transparency was detected when plain/heavyweight paper was spec- ified.Initial Actionsï Check that the loaded paper type matches the UI selection. ï Check the OHP sensor area for foreign substancesProcedureEnter dC330 8-110. Block the OHP Sensor R using plain paper. The display changes. YN Go to RAP OF 99-1 Reflective Sensor RAP. Replace the MCU PWB (PL 13.1)....