Vodavi Starplus Sts Station User Guide

68 Personalized Messages
To use a unique custom message:
1. Dial [633] on the dial pad.
-or-
Press a preprogrammed PERSONAL MESSAGES button.
2. Dial a valid message number (18-20) for the desired custom 
message.
To cancel a custom message:
1. Either dial the Personal Messages code [633] + [00], dial 
[662], or press the DND button.
2. Replace handset. DND button LED extinguishes.

SINGLE LINE TELEPHONE
SLT users can use custom messages (21-30) as described 
above. Unique custom messages (18-20) are not...

Personalized Messages 69
3. Enter the date/time on the dial pad as shown:
4. Press the HOLD button to enter message. A confirmation 
tone will sound and the DND button LED will flash.
To cancel the message:
1. Either dial the Personal Messages code [633] + [00], dial 
[662], or press the DND button.
2. Replace the handset. The DND button LED will extinguish.

SINGLE LINE TELEPHONE
Not applicable
Other Codes
1 = 1# 8 = 8#“ = 01 * = *#
2 = 2# 9 = 9# , = 02 ( = #1
3 = 3# 0 = 0# ? = 03 ) = #2
4 = 4# Space =...

70 Personalized Messages
Scrollable Canned Messages
The Scrollable Canned Message feature allows you to use a 
single digit [#] or [

] to scroll through the canned messages 
and select one. When the desired message is displayed, 
pressing the hold button places that message on the station 
LCD. This feature operates when the phone is in the idle mode 
only. This feature cannot be activated if the station is in the Call 
Forward or DND mode(s). This feature is not available to 
Attendant stations.
To...

Personalized Messages 71
To cancel the message:
1. Either dial the Personal Messages code [633] + [00], dial 
[662], or press the DND button.
2. Replace the handset. The DND button LED will extinguish.

SINGLE LINE TELEPHONE
Not applicable
Personal Messages Flexible Button
You can program the code [633] onto a flexible button to 
speed access to select and use messages.
To program the Personal Messages Flexible Button:
1. Press the SPEED button twice.
2. Press the desired flexible button. The LED will...

72 PBX/Centrex Codes on a Flex Button
PBX/Centrex Codes on a Flex Button
For one-button access to Centrex or PBX features:
1. Program Centrex or PBX code into a Station or System 
Speed Dial bin, including hook-flash (FLASH key), [

], and 
[#] commands (refer to “Speed Dial” on page 80).
2. Program that speed bin onto a flexible button (refer to 
“Flexible Button Programming” on page 48).
Release Button
The Release Button feature allows the station user to speed up 
call handling time by disconnecting...

Redial 73
Save Number For Redial
If you wish to save the last number you dialed,either:
1. After placing an outside call, keep the handset off-hook.
2. Press the SPEED button twice,
-or-
Use the Soft Key’s STORE NO option.
Redial a Saved Number
To dial a number that was saved for redial, either:
Press the SPEED button, then press the [

] key.
-or-
Use the Soft Key’s SNR option when in an idle condition.
The saved number is automatically dialed.
Repeat Redial 
When you place a CO call and a Busy or No...

74 Ring Down / Hot Line / Off-Hook Preference
To activate a redial:
Press the preprogrammed REDIAL flexible button,
-or-
Press the ON/OFF button,
-or-
Lift the handset, the line will be seized and number is 
dialed. If you receive a busy/no answer, you may repeat the 
step to activate another redial.
To cancel the operation:
Press the preprogrammed REDIAL flexible button. A 
confirmation tone will sound and the Auto Redial function 
is cancelled.

SINGLE LINE TELEPHONE
Not applicable
Ring Down / Hot...

Ring Down / Hot Line / Off-Hook Preference 75
While Off-Hook Preference is enabled, you may access 
internal intercom dial tone as follows:
1. Press the preprogrammed ICM button,
-or-
Dial your intercom number. (Do not lift the handset or press 
the ON/OFF button before dialing intercom number.) The 
LED will light steady and an intercom dial tone will sound.
2. Dial an internal station or feature access code.
Off-Hook Preference Programming (Via a Station)
If your phone is programmed for Off-Hook...

76 Ring Tone
Ring Tone
To select a distinctive ring tone for a station:
1. Dial the Ring Tone program code [695] on the dial pad. The 
following message displays:
2. Enter a valid tone number. The speaker will sound a steady 
tone that correlates to the 2-digit entry. The 2-digit tone 
number will display in the lower left corner of the LCD.
The ringing choices are as follows:
3. When the desired tone is selected (default ringing code is 
set to 00), press the SPEED button to save it as the tone to...

School Zone 77
School Zone
Description
The School Zone feature allows a person at a station(s) 
specified as an Administrator to control incoming calls for all 
stations specified as a Classroom. The Administrator controls 
the type of call forwarding and the call forwarding destination. 
Call forwarding types include All Call Forward, No Answer Call 
Forw ard, Busy  Call Forw ard, an d Bu sy / No An swer C all F orwa rd. 
Valid call forwarding destinations include station numbers, 
hunt groups, UCD...