Vodavi Starplus Sts Station User Guide

78 School Zone
To view call forwarding status of Classroom telephones:
1. The Administrator uses a station assigned as an 
Administrator station and dials feature code [630] + [#]. A 
confirmation tone sounds and the LCD updates to show 
one of the following displays: 
2. Press [ON/OFF] to return to an idle status.
Conditions
»  A station can be assigned as an Administrator or as a 
Classroom, but not as both.
»  A call from an Administrator station to a Classroom station 
overrides any School Zone call...

Software Version 79
Software Version
The current system software version can be viewed. The display 
shows the version number and level of software.
To view the Software Version Display:
Dial the S/W Display code [605] on the dial pad. The top line 
of the LCD shows the engineering version of the software. 
The bottom line of the LCD shows the features that are 
enabled for your software, e.g., BASIC.
Speakerphone
1. Press the ON/OFF button to ON (An intercom dial tone will 
sound).
2. Press the DSS key...

80 Speed Dial
Speed Dial
A keyset user can associate up to 20 frequently dialed numbers 
as Station Speed Numbers (9000-9019). Telephone numbers 
can be up to 24 digits including pauses, flash commands, 
pulse-to-tone switchover, and non-display characters. A pause 
is automatically inserted after a flash.
To use speed dial:
1. If an outside line was not specified in programming, one 
can be selected now or the system will assign the line.
2. Press the SPEED button and dial speed bin location,
-or-
Press...

Speed Dial 81
4. Dial the desired telephone number and include these 
special codes:
TRANS -- Initiates a Pulse-To-Tone switchover.
HOLD -- Inserts a Pause.
FLASH -- Inserts a Flash into the speed number.
TRANS -- When used as the first entry in the speed bin, this 
inserts a non-display character causing numbers stored in 
the bin not to appear on the digital telephone’s display 
when bin is accessed.
5. Press the SPEED button.
6. Replace the handset to end the speed bin programming.
To program multiple...

82 Station/Port Fixed Number
To store speed dial numbers:
1. Lift the handset.
2. Dial [661] on the dial pad.
3. Dial desired station speed number (9000-9019).
4. Dial the telephone number to store.
5. Briefly press and release the hookswitch. A confirmation 
tone will sound.
System Speed Dial Access
Stations can be individually allowed or denied the ability to use 
system speed dial (9020-9099) numbers. (System speed numbers 
9060-9099 are not monitored by toll restriction.) Stations cannot 
be...

St at ion Relocat e 83
Station Relocate
The Station Relocation Feature allows you to dial a code 
followed by the old station number to bring all the station 
attributes including extension number, button mapping, speed 
dial, and class of service to the new location.
1. A station can be relocated by unplugging it, then plugging 
it into a new location.
2. Dial [636] on the dial pad. Then, dial the extension number 
of the station being relocated. Once this is done, all station 
attributes are copied to...

84 Text Messaging (Silent Response)
While receiving a Camp On or OHVO call:
The called party may press a preprogrammed Text Message 
button with a specific message [633+XX].
For Example … [633] + [38] means a telephone calling the 
station receives the message WHO IS IT ?

SINGLE LINE TELEPHONE
Not applicable
Code Text Message Code Text Message
31 I Will Take Call 42 Is It Important?
32 Take Message 43 Is It Urgent?
33 Transfer To Secretary 44 Send Call To Voice Mail
34 Put Call On Hold 45 Park Call
35...

Uniform Call Distribution 85
Uniform Call Distribution
The Uniform Call Distribution (UCD) features are described in 
the following sections.
UCD Calls In Queue Display
From an idle display key telephone:
1. Dial [567] followed by the UCD group number (55X),
-or-
Press the preprogrammed flexible button. The ON/OFF 
button LED lights steady.

This idle display prompts a Supervisor that a group is 
having problems answering their calls.

The display tells the agent and their supervisor how 
many calls are...

86 Uniform Call Distribution
To enter Unavailable Mode:
Dial [566] on the dial pad to block incoming UCD calls,
-or-
Press the preprogrammed AVA I L A B L E / U N AVA I L A BL E  b u t t o n .
UCD Overflow Station Forward
An enhancement allows UCD calls reaching the Overflow 
Station to call forward to another station:
1. Lift the handset or press the ON/OFF button.
2. Press the FWD button or dial [640].
3. Dial the desired code:
[6] = All Calls [8] = Busy
[7] = No Answer [9] = Busy/No Answer
4. Dial the...

Universal Day/Night Answer 87
Universal Day/Night Answer
Incoming CO lines can be programmed for Universal Day 
Answer (UDA) or Universal Night Answer (UNA). UDA/UNA 
assigned CO lines can also signal over the external page port(s). 
If External Day programming is enabled and the system is in 
the day mode, the assigned external page port(s) present a 
ringing signal. UDA/UNA is established on a per CO line basis in 
admin programming.
When the system is in Day or Night mode and an outside 
line rings at...