Vodavi Starplus Sts Station User Guide

18 Call Back
Call Back
A station can initiate a call back request to another busy 
station. Once that station becomes idle, the station that left the 
call back request is signaled.
To leave a Call Back request when a number is busy:
1. Press the preprogrammed CALL BACK flexible button or use 
the Soft Key’s CALL-BK option.
2. Replace the handset or press the ON/OFF button. When the 
busy station hangs up, you will be signaled.
3. Answer the call; the station you called will then be signaled. 
(If your...

Call Coverage 19
Call Coverage
The Call Coverage feature provides the functionality for 
stations to answer calls for other stations by utilizing call 
coverage buttons. Visual and Audible status of ringing stations 
to an assigned coverage station are provided.
To assign a Call Coverage Button:
1. Press [SPEED] + [SPEED].
2. Press a desired flexible button.
3. Dial [647] for Non-Ringing or [646] for Ringing, followed by 
the station number to cover. A confirmation tone will 
sound.
After button is...

20 Call Forward
The following message displays after the call is answered.

SINGLE LINE TELEPHONE
This feature can cover SLT extensions, however an SLT cannot 
perform the call coverage function. The SLT extension need 
not be physically installed, only the SLT card must be installed.
Call Forward
The Call Forward feature allows a station the ability to have 
calls (internal or external) forwarded to a designated station, a 
UCD group pilot number, Voice Mail group number, or Hunt 
group. This feature...

Call Forward 21
To remove Call Forwarding:
1. Lift handset or press ON/OFF button.
2. Either press the FWD button, dial [640] or [662], or use the 
Soft Key’s CLR-FWD option. A confirmation tone sounds 
and the FWD LED extinguishes.

SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as the Digital 
Telephone, except there is no FWD button or Soft Keys. You 
must use feature codes 640 and 662.
Call Forward - External (Off-Net)
Stations are allowed to forward intercom and transferred CO...

22 Call Forward
Call Forward - Follow Me
The Follow Me feature lets a user who is away from their 
station, activate/deactivate call forwarding from another 
station in the system. This lets the user forward their calls to 
their current location or into Voice Mail, UCD, Hunt Groups, any 
other station in the system, or to an off-net location. When this 
call forward is activated, all calls presented to the forwarded 
station forward to the destination station immediately.
To activate Follow Me Call...

Call Forward 23
To establish Follow Me Call Forwarding (off-site location):
1. Dial into the system on a DISA or TIE trunk. Enter the DISA 
access code, if applicable.
2. Dial the Follow Me Forward code [642] on the dial pad.
3. Dial the station number of the station from which 
forwarding is desired.
4. Dial the appropriate forwarding condition code.
[6] = All Calls [8] = Busy [

] = Off-Net
[7] = No Answer [9] = Busy/No Answer
5. Dial the three- or four-digit destination number where calls 
are to be...

24 Call Park
Call Park
Call Park - Personal
Each digital telephone in the system can place a call into a 
personal park location and then later retrieve that call from the 
originating station. Intercom calls and CO line calls can be 
placed into the stations’ personal park location. Calls parked in 
a personal park location are subject to the system call park 
recall timer. A station retrieving a personal parked CO call must 
have either a direct CO line appearance or an available loop 
button to...

Call Park 25
4. Depress the hookswitch momentarily. An intercom dial 
tone will sound.
5. Dial [438]. The first call is returned and the second call will 
be placed into personal park.
Call Park - Station
Call Park (by station number) allows calls to be parked at a 
station other than you own, thus allowing for expanded park 
locations.
To create a CALL PARK (Station) button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button.
3. Dial [439] + [#]. A confirmation tone sounds.
The user can...

26 Call Park
While connected to an outside line:
1. Press the TRANS button.
2. Dial [439] + [XXX] (XXX = station number).
-or-
1. Press the TRANS button.
2. Press the preprogrammed CALL PARK (Station) button.
3. Dial [XXX] (XXX = station number).
To retrieve a Call Park (Station) call:
Dial [#6] + [XXX] while at any telephone in the system, 
including the initiator’s. [XXX] = the station number used to 
park the call.
-or-
Dial [438] from the initiator’s station.

SINGLE LINE TELEPHONE
The SLT operation...

Call Park 27
To consult, page, or call an internal party while connected 
to an outside line:
1. Press the TRANS button, or press the CALL PARK flexible 
button. The caller will be put on hold.
2. Dial the parking location (430 to 437), or press the 
preprogrammed CALL PARK flexible button. A confirmation 
tone will sound.
3. If a busy tone is received, press TRANS twice and dial 
another park location, or press the CALL PARK flexible 
button for a different parking location.
To retrieve a Parked...