Vodavi Starplus Sts Key Systems Programming Operation Manual

IntroductionD-3
Customer Database Programming
Introduction
The STS system is programmed to meet each customer’s individual needs. All programming 
is done at any 24-Button STS Telephone as the programming station or through an ASCII 
terminal or PC. The digital display model is required for programming.
When the programming mode is entered, the digital telephone being used no longer 
operates as a telephone but as a programming station with all of the buttons redefined. The 
keys on the dial pad are used...

D-4Introduction
Customer Database Programming
When using a PC to program the system, the following chart presents the data terminal 
characters that are equivalent to the key set buttons.
Figure D-1: Data Terminal Program Codes Cross Reference
Figure D-2: Programming Button Mapping
Some features must have more than one data field programmed for that feature 
to work. This information is stated in the instructions.


	





	




	





	





	...

Program Mode Entry (Key Station) D-5
Customer Database Programming
Program Mode Entry (Key Station)
Programming is performed at any 24-button Digital Display Terminal. Programming is always 
done at this type of station regardless of the class of service or which station has been 
assigned as the attendant(s).
To enter the Program Mode:
1. Press the ON/OFF button (optional). LED lights and intercom dial tone sounds.
2. On the dial pad, press [

][
][3][2][2][6] (default password). A confirmation tone...

D-6 Database Programming Worksheets
Customer Database Programming
Database Programming Worksheets
Before attempting programming, it is strongly recommended that customer database 
worksheets be prepared (Refer to “Programming Tables” on page D-11). These worksheets 
should become part of the permanent record of customer programming. Refer to the 
following sections when preparing the worksheets.
Database Upload/Download Routine
The Database Upload/Download Routine (FLASH 86) provides a maintenance...

Database Upload/Download Routine D-7
Customer Database Programming
HYPERTERMINAL -- Uploading a Database File
After opening HyperTerminal, and the New Connection screen displays, complete the 
following steps:
1. Type a connection name and select the appropriate icon, then click .
2. When the Phone Number screen displays, change the setting in the Connect Using box 
to: Direct to COM1, and then click . 
3. Once the COM1 Properties screen displays, change the settings as shown, and then click 
.

Baud...

D-8 Database Upload/Download Routine
Customer Database Programming
HYPERTERMINAL -- Downloading a Database File
After opening HyperTerminal, and the New Connection screen displays, complete the 
following steps:
1. Type connection name and select appropriate icon, then click .
2. When the Phone Number screen displays, change the setting in the Connect Using box 
to: Direct to COM1, and then click . 
3. Once the COM1 Properties screen displays, change the settings as shown, and then click 
.

Baud Rate =...

Database Upload/Download Routine D-9
Customer Database Programming
ECOM -- Uploading a Database File
After opening ECOM:
1. Press< Alt> +  to open COM Port Options.
2. Change COM port settings as follows, and click .

Baud Rate = 9600

Parity = None

Data Bits = 8

Stop Bits = 1

Flow Control = no boxes checked, Xon=17, Xoff=19
3. Press  and complete the following fields:
4. Press  on keyboard or locate file and select Upload.
5. Highlight XMODEM and click .
6. Type or select upload filename and click ....

D-10 Database Upload/Download Routine
Customer Database Programming
ECOM -- Downloading a Database File
After opening ECOM:
1. Press< Alt> +  to open COM Port Options.
2. Change COM port settings as follows, and click .

Baud Rate = 9600

Parity = None

Data Bits = 8

Stop Bits = 1

Flow Control = no boxes checked, Xon=17, Xoff=19
3. Press  and complete the following fields:
4. Press  on keyboard or locate file and select Download.
5. Highlight XMODEM and click .
6. Type or select download filename and...

Programming TablesD-11
Customer Database Programming
Programming Tables
Table D-1: System Parameters
Program 
CodeFlexible
ButtonFunction Format Default Customer Data
FLASH 01System Timers
1 System Hold Recall Timer 000-300 060 sec
2 Exclusive Hold Recall Timer 000-300 180 sec
3 Attendant Recall Timer 00-60 01 min
4 Transfer Recall Timer
000-300045 sec
7 Pause Timer 1-9 2 sec
8 Call Park Recall Timer 000-600 180 sec
9 Conference/DISA Timer 00-99 10 min
10 Paging Time-out Timer 00-60 15 sec
11 CO Ring...

D-12Programming Tables
Customer Database Programming
FLASH 05System Features 1 Programming
1 Attendant Override Disabled/Enabled Disabled
2 Hold Preference System/Exclusive System
3 External Night Ring Disabled/Enabled Disabled
4 Executive Override Warning Tone Disabled/Enabled Enabled
5 Page Warning Tone Disabled/Enabled Enabled
6 Background Music Channel Disabled/Enabled Enabled
7 Least Cost Routing Disabled/Enabled Disabled
8 Account Codes - Forced Disabled/Enabled Disabled
9 Group Listening...