Vodavi Starplus Dhs Installation Manual

4.429 Class Of Service (Day/Night) 
4.4.29.1 Description: 
The system provides eight (8) Classes of Service (COS) for assignment of outside line dialing privileges. 
Each system station may be assigned one day COS and one night COS. The station COS is primarily used 
for restriction and control of long distance dialing. Toll restriction tables allow customized dialing 
privileges to be assigned to any or all COS. 
System Speed Dial is specially linked with Class of Service such that all speed dial bins...

dialing 02, etc. An All CO Line Group code is available for‘ programmable feature button assi,onment by 
dialing 00 for that feature button. 
At default all CO Lines are assigned to group 1. 
4.4.32 CO Line Interface 
The system provides loop start CO line interface with built-m gas over-voltage protection. Either pulse 
(rotary) or DTMF signaling is provided. Abandoned call supervision is provided for all CO lines. 
The maximum system configuration provides for either nine (9) CO lines or twelve (12) CO...

C. 
h. 
i. 
j- An incoming call can only be indicated on its associated ,CO Line Group button. For example, if CO 
Line 1 belongs to CO Line Group 1, its incoming status can be indicated either on CO Line Group 1 
button or on general CO Line Group button, whichever is pressed. 
If a station has group button and individual CO line button: 
An incoming CO line call will be indicated only on an individual CO line button. 
When pressing an individual CO line button, the LED indication on an assigned group...

4.435 CO Line Type Assignment 
4.4.35.1 Description: 
Each CO line can be assigned as “PBX CO Line” or “Open”. The Open assignment is reserved for CO 
lines equipped on the system, but not connected to telephone company network facilities. The Open type 
indication alerts the system that this CO line shouldn’t be used to place outgoing calls when system features 
are invoked which initiate automatic CO line selection. 
The PBX CO Line type indication invokes other system automatic operations for handling...

g@$j ‘$f@j : 
%. 
5. Dial :&%.S%%%. The display shows: 
You will hear confirmation tone and momentarily the display will chatqe to: 
4.4.36.6 Operation: To add a fourth party : 
HOLD 6. 
7. Dial the fourth party. 
8. press &&f$& . 
The conference initiator may force-release a conference member or talk privately with a conference member. 
4.4.36.7 To Force-Release - Basic and Enhanced Telephones: 
FEAT 1. press ..Ij. 
3. Dial the station number or press the line button to release. 
4.4.36.8 To Talk...

FEAT gg$g ;.jg@ 
4.437 t Conference (Unsupe=v&d) sw m fm 
4.4.37.1 Default Setting: N/A 
4.4.37.2 Related Feature: 
Hold 
4.4.37.3 Related Programming: 
CALL HANDLING - UNS CNF TIME 
CALL HANDLING - UNS CONFERENCE 
4.4.37.4 Description: 
This feature allows you (as the conference controller) to exit a conference yet enable two outside lines also 
engaged in the conference to continue their conversation. This conference is called Unsupervised since no 
internal user is involved as a member of the...

4.4.38.2 Operation: 
.

from Voice Announce mode to Tone Ring mode by dialing the asterisk !?2& key after dialing the station 
number. 
Intercom dial tone may be automatic upon lifting the handset or after pressing the z (speaker) button, 
if enabled m&r he Auto Line Select ( w $& g&4) station feature. 
4.4.41.2 Operation: 
To place an ICM call: 
Dial the station number on the telephone dial pad. 
Ringback tone is heard or if the called station is in Voice Announce mode a connection is automatically selected. 
If the called...

4.4.42 Dial Pulse To DTMF Conversion 
4.4.42.1 Description: ., 2,;: 
When making an outside call on a CO line with Pulse (Rotary) dialing, the digits following %% will be sent 
in DTMF tone mode. Pulse-to-tone changeover can be programmed into any Speed Dial bin, if desired. 
4.4.42.2 Related Feature: 
System Speed Dial 
4.4.42.3 Related Programming: 
CO LINE - DLALING 
4.4.43 ’ Direct Inward System Access @ISA) 
4.4.43.1 Default Setting: 
Inactive for all CO lines 
4.4.43.2 Related Feature: 
System...

2. Dial one of the DISA passwords (24 possible). 
Once your password is verified a second dial tone is presented. You may access three@) types of features: 
speed dialing, CO line access, and intercom calling. 
4.4.43.8.1 Using System Speed Dialing 
5. Dial the System Speed Dial Bin (20-99). 
The system will select an idle CO line and dial the stored speed dial number. 
4.4.43.8.2 To Access a CO Line 
If the CO line selected is idle DISA will connect the line for dialing. 
4.4.43.8.3 To Place an Intercom...