Vodavi Starplus Dhs Installation Manual

7. If the year is correct press “next”. 
8. 
If you are programming a new year, dial the numbers for the current year. 
9. Press “save”. 
IO. 
Press “next” to continue programming System Date and Time. 
Il. Press 
“back” or “next” to return to the main Attendant Administration menu. The display will show: 
4.4.8.5.3 System Speed Dial 
6. Press “show”. The display will show: 
7. Dial the System Speed Dial bin number (20-99) to be changed. 
8. Press 
“show”. The display will show the contents of the speed...

4.4.9.3 Related Programming: 
STA TION - DA Y/?vITE COS 
RESTRICTION - CO LN CALL 
DISCRIMINA TION 
4.4.9.4 Description: 
This feature is also known as Traveling Class of Service (COS). If you have extended dialing privileges, 
you may access your same COS at a telephone without extended dialing privileges. Long distance and 
restricted CO line calls can be made from telephones that are normally restricted. 
4.4.9.5 Operation: 
At the telephone without extended dialing privileges: 
1. press  ~$$$& $,@&...

4.4.10.4 Description: : 
a”. 
Automatic Busy Redial (ABR) may be used to dial the last number dialed. The system will automatically 
dial the number and then monitor the line for a busy signal. If a busy signal is detected, the system ends the 
call and attempts to dial the number again. The redial cycle will continue until the number of attempts 
designated in programming is reached. 
4.4.10.5 Operation: 
1. press E. e- 
j$g& @@ 
3 
-. Dial @&g &gg 
. An Executive Telephone will display: 
-. 
( I/ IO...

Use Steps 1 and 2 above to also disable the feature. An Executive Telephone will display “AUTO HOLD 
DENY” when you disable the feature. 
4.4.11.6 Operation: 
During a telephone conversation on a line or an intercom call, press a different line button. The first call is 
automatically placed on Exclusive Hold. 
Notes: 
a If you access an idle line and skip to another line before dialing, the fist line will not be automatically 
placed on Hold. 
b. The Automatic Hold feature places a call on Exclusive...

3. 
Press the “chg” button to select between ICM, OUTG LN (any outgoing line), CO LN * (for each of 
the equipped lines). 
4.4.12.7 Programming to Cancel: Basic and Enhanced Telephones 
1. press &&$& - : 
1. 
2. 
4.4.12.8 
Programming to Cancel: Executive Teleohones 
Select “EMPTY” during Step 3 of the programming sequence. 
Notes: 
a A line programmed for Automatic Line Selection must be programmed as available for access in the 
system programming. 
b. When Automatic Line Selection is set to “EMPTY”...

back-up will maintain the database programmin,, 0 time and-date displays, personal .speed dial numbers, 
feature button programming, etc. for up to seven (7) days of continuous AC power loss. When system AC 
power is restored, the system will resume operation and the memory battery will be. recharged. A 
discharged battery can require up to 14 hours to reach a fully charged condition. 
During AC power interruption, the system will not operate unless System Battery Back-Up is equipped. 
When the...

4.4.17.1 Default Setting: N/A 
4.4.17.2 Related Feature(s): 
KM Ring & Voice Call Interchanging (*) 
Direct Station Selection 
Voice Announce Handsfee 
4.4.17.3 Related Programming: 
None 
4.4.17.4 Description: 
This feature allows you to queue a station which is busy, in Do Not Disturb (DND), or idle. When you 
send a Call Back to a busy station, the Call Back process will begin when the busy station hangs up. When 
you send a Call Back to an idle station, the Call Back process will begin once the user...

4.4.17.5.3 Answering a Call Back: Basic and Enhanced Telephones 
1. When the Call Back process begins your telephone will ring a special Call Back ring for 30 seconds. 
3 
-. 
Lift the handset or press .s . 
4.4.17.5.4 Answering a Call Back: Executive Telephones 
1. When the Call Back process begins your telephone will ring a special Call Back ring for 30 seconds. 
The display will show: 
7 
-. Lift he handset or press sF$ . 
3. Press “reply” to continue the Call Back. The display will show: 
If you...

4.4.18.3 Related Programming: 
STA TION - CO RING ASSIGNMENT 
STATION - RECEIVE ASSIGNMENT 
4.4.18.4 Description: 
There are many Call Forward choices: 
H You can have your calls forwarded when your telephone is idle, 
W You can have your calls forwarded when your telephone is busy, 
n You can forward all your calls, 
n You can use the “follow me” feature to receive calls at a temporary location. You can activate the 
feature remotely from another station. 
W You can have your calls forwarded when there...

4. Dial the station number where calls will be forwarded then press “save”. 
Busy/No Answer Call Forward: 
3. For more forward options press “next”. The display shows: 
4. Press “bsyha”. The display shows: 
5. Dial the station number where calls will be forwarded then press “save”. 
Idle Call Forward: 
4. Press “idle”. The display shows: 
5. Dial the station number where calls will be forwarded then press “save”. 
Direct (All Call) Forward: 
4. For more forward options press “next”. The display shows:...