Vodavi Starplus Dhs Installation Manual

9. Press “save”. The display will momentarily display the following message while confirmation tone is 
heard. 
If the station identified is in Do Not Disturb or has messages waiting, Follow Me Call Forward will not bk allowed 
and the message “OUT OF SERVICE” will be displayed: 
4.4.18.7 To Cancel Call Forward: 
Any call forward mode can be canceled at the station that is fomarded by pressing cxzczs ::mi::. The display 
will indicate “DELETE FORWARD”. (See note “n” below.) 
4.4.18.8 Operation: 
Let’s...

i. Call Forward cannot be programmed for more than three (3) stations in series. For instance, if Station 
A forwards to Station B and Station B forwards to Station C, Station C cannot forward calls. 
j. Any number of stations may be programmed for Call Forward to the same destination, simultaneously. 
k. All Call Forward will forward all intercom calls, regardless of busy/idle state. 
I. Call Forward No Answer shows a timer value on the display of an Executive Key Telephone which 
allows the station to...

.== 
Notes: .L 
.-- 
a. Caller ID data is also output to a SMDR (Station Message Detail Recording) device when equipped. 
b. The right Soft Button may be used to select caller data to display. (Name/Number) 
FEAT :~~~~~ 
4.4.20 Caller m _ Unanswered Call Table &Y-% j&j@ :wi 
4.4.20.1 Default Setting: Empty 
4.4.20.2 Related Feature: 
Incoming Caller Identification 
4.4.20.3 Related Programming: 
RESOURCE - A TTENDANT 
4.4.20.4 Description: [Executive Model Only] 
Caller Identification information for...

Notes: 
a. You can press ?%Z&! at any time to exit the Caller ID Unanswered Call Table mode. 
b. Any Executive telephone user can review the Caller ID Unanswered Call Table, but the table can 
reviewed by only one telephone at a time. 
4.4.21 Call Operator ~S!%i% (Call Attendant) 
4.4.21.1 Description: 
The station that is programmed as the attendant may receive intercom calls by a one-digit code. The Call 
Operator code is programmable as either 0 or 9. The code is in addition to the assigned two-digit...

4.4.23.1 Default Setting: N/A 
4.4.23.2 Related Feature: 
System Hold 
Call Park Answer 
4.4.23.3 Related Programming: 
CALL HANDLING - PA Rh- REMIND 
4.4.23.4 Description: 
This feature allows you to have calls parked at your telephone that can be retrieved from any telephone in 
the system. Calls are parked and retrieved by dialing the Call Park code followed by the pre-assigned 
station number. 
4.4.23.5 Operation: During a call on Line 1: 
p .$?jj” 
2. Dial g@ $..@ 
. At an Executive Telephone the...

4.4.24.1 Default Setting: N/A 
4.4.24.2 Related Feature: 
System Hold 
Call Park 
4.4.24.3 Related Programming: 
CALL HANDLING - PARK REMIND 
4.4.24.4 Description: 
You may retrieve a parked call by using one of three methods: 
FEAT y$g 3;.:g 
3 
a. Dial c:zss .g$? r&B followed by the CO line number h two-digit format (0 l-12), or 
3. 
Press the flashing CO line button (if the CO line for the parked call appears on the telephone). 
4.4.24.5 Operation: 
1. press ?S. 
3 i”?j$; :+jj; 
-. Dial JW :a~%. At an...

CO Line Calls: Call Pick Uu Prioiitv-List 
ICM Calls: 
I. Camped-On 1. Incoming 
2. Recalling 2. Voice Call 
3. Transferred 
4. Incoming 
If several calls of the same priority are ringing at the station, the calls are answered in the order they are 
received. 
4.4.25.5 Operation - Direct Call Pick Up: 
1. press E>. 
~jy@$ @p;j 
2. Dial $j&$ ;a “::A . 
..,.. :... ,: .: FE< * n E xecutive Telephone will display: 
-4.4.25.6 Operation - Group Pick Up: 
1. Press $z;z& . 
~2&~ 
7 
-. Dial, +&g z..;jgj. 
Notes:...

6 
II *.. 
4.4.26.4 Operation: 
., .- Let’s Stations 12 and  use 16 as an example. While Station 16 is busy: 
1. Station 12 makes an intercom call to Station 16. 
Station 12 hears ringback tone and the display shows: 
Station 16 hears one ring tone 
and the display shows: 
7 
-. Station 16 can either reply or reject the call: 
To Reply: 
Press “reply”. The display at Station 16 shows: 
The original call at 
enabled. Station 16 is placed on Hold automatically if Auto Hold Allow is 
The display at Station...

, 
:..  4.4.27.3 Operation Basic and Enhanced Telephones: 
.- 
iggg 1. While listening to busy tone after calling a station dial @B#. 
4.4.27.4 Operation Executive Telephone: 
While listening to busy tone after calling a station the display will show: 
/ 
1. Press “next”. The display will show: 
3 
-. Press “camp”. The display will show: 
You will hear confirmation tone followed by Music-On-Hold (if equipped) until your Camp On is 
answered. 
When the camped-on station places the current call on hold or...

-.. 
$@fzz ;@$g 
3. Dial ~~~ ~~. y ou will hear error tone if the line is already camped-on. You will hear ringing when 
the line becomes available and the lamp for the line will flash. 
4. Press the line button or Iif? the handset. 
To Activate: Executive TeleDhone 
1. Press the busy line button. The display shows: 
2. Press “camp”. The display shows: 
If the line is already camped-on the display shows: 
You will hear ringing when the line becomes available and the display will show:. 
3. Press the line...