Vodavi Starplus Dhs Installation Manual

User Saved Number 
Day COS 
Night COS 
Auto Hold mode setting 
Phone Lock status .,Voice Announce mode setting 
Call Wait setting 
Page Receive setting 
Night Station status 
4.4.104 Station Groups 
4.4.104.1 Description: 
The system provides eight (8) Station Groups for partitioning the system into separate departments or 
related features. Members of a Station Group have the ability to pick up incoming or transferred calls f?om 
FEAT igy!q@$ 
other associated members h the same goup, via the Group CalI...

4.4.107.3 Related Programming: 
RESTRICTION - CO LN CALL DISCR 
STA TION - DA Y/NITE COS 
CALL HANDLING - DISA - DAYmITE COS 
4.4.107.4 Operation: 
CO line calls placed must appear in the Digit Interval Allow Table and marked for association with the COS 
assigned the station attempting the call or the attempt will fail. 
Notes: 
a. At default all stations are assigned with day and night COS 0. 
b. The Digit Interval Table is empty except for interval 1 where the number range from 0 to 9 is 
programmed....

4.4.110 Transfer 1. 
4.4.110.1 Default Setting: 30 Second Ring Transfer Recall Time 
4.4.110.2 Related Features: 
Call Waiting (Executive Key Telephone) 
Recall 
4.4.110.3 Related Programming: 
CALL HANDLING - RECALL TIME 
4.4.110.4 Description: 
There are three (3) types of transfer you may use: system-screened (talk transfer), un-screened, and with 
FP3 the Vodavi (simplified method). When you complete a transfer the outside line is placed on Exclusive 
Hold and can only be retrieved at your telephone...

Vodavi simplified method: (Transfer to Voice Mail) Cont’d 
1. 
Press the Voice Mail button. 
3 
a. Dial the two digit station number of the target mailbox. 
3. Hang up to complete the transfer. 
Notes: 
a. 
b. 
C. 
d. 
e. The effective ring transfer recall time for any CO line call is programmable, between 16/30/60/90/120 
seconds. 
When a transferred CO line recalls, the line number and station number where the call was transferred 
will be displayed. 
Once the outside line changes from “Hold” to...

4.4.111 User Name Programming 
4.4.111.1 Description: 
An alphanumeric, seven-character title may be assigned to each station in the system. This title will be 
displayed on Executive Key Telephones in place of the standard “STATION” message. 
Station user names are pro,orammed in the customer database programming. The names may consist of 
upper and lower case letters. 
4.4.111.2 Related Features: 
Vflrious call processing 
4.4.111.3 Related Programming: 
RESOURCE - USER NAME . 
1 : 
_. 
4.4.112 FEAT...

Notes: 
a. The cg button Iamp will Ii&t during hands&e operation. 
b. To receive intercom calls with Handstiee Answer-back, the feature must be enabled. 
4.4.113.1 Default Setting: None assigned. 
4.4.113.2 Related Features: 
Call Forward 
Hunt Group 
4.4.113.3 Related Programming: 
CALL HANDLING - VM DIALING RA TiO 
SYS APPLICA T - STA HUNT GROUP - VM 
4.4.113.4 Description: 
A ancillary voice mail device may be connected to the system. You program a button for easy access to this 
feature. In addition,...

-0 
b. If you use voice mail regularly, it may be more convenient to program a Programmable Feature Button __ 
with the Voice Mail code. 
When an answering machine is connected to the system via a 2 Port 
SLT Adapter and In-Band (DTMF/Touch Tone) digits must be sent to 
the answering machine to control its functions. the SLT port must be 
programmed as type “VW. . . 
.,. 
:. q:.+.; .3+~W,% 
pJ$-r .(fi%p ~&$ 
4.4.114 Voice Mail MO&or B g&i ..&j 
4.4.114.1 Default Setting: N/A 
4.4.114.2 Description:...

Notes: 
‘. 
a. The feature code may be programmed on a programmable feature button. The green lamp will flash 
fast to indicate that the Monitor feature is ready. 
b. You may press E while monitoring a call to be connected to the caller. 
C. When you answer a call the programmed Disconnect Digits table digits are sent to the voice mail port. 
d. You will hear the alert tone regardless of whether your telephone is idle or busy or in speakerphone or 
handset mode. 
e. When the new timer “VM MON TIME”...

3. Press “voice”. The display shows: 
If the Voice Over Busy is rejected, the display will read “VOICE REJECTED”. 
To Accept a Voice Over Busy: 
If while listening to the calling party you wish to speak to the Voice Over Busy initiator: 
MUTE 1. Press MUTE 
s?%ZZE. (Use LW to switch your @msminer between the original call and the Voice Over Busy 
initiator.) 
To Reject a Voice Over Busy - Basic and Enhanced Telephones: 
FEAT 1. press ;.-3 . 
#gg ggzj 
2. Dial ;.Fs$ @@. 
To Reject a Voice Over Busy -...

4.4.116 Voice Recorder hw w m 
4.4.116.1 Default Setting: N/A 
4.4.116.2 Description: 
If you have an integrated voice mail system, this feature will allow you to record internal and external 
conversations. When the Voice Recorder is activated, a conference is established between the call and the 
system voice mail group The conversation is recorded in your voice mail box when the feature is enabled. 
4.4.116.3 Operation: 
During a conversation: 
1. press :z2 . 
.,p I .,~ ,,.,. 
g@ :$$$$;;;$: 
3 
-....