Vodavi Starplus Dhs Installation Manual

4.4.119 Feature Access Codes 
66~” = &&& (Features) Key Telephone button 
Backaround Music 
Call - Intercom call (2 digits) 
Call - Hunt Group 
Call - Make an outside line call 
Call Back intercom (idle/busy) 
Call Back Intercom Cancel 
Caller ID Unanswered Call Table 
Call Forward Idle 
Call Forward Busy 
Call Forward Direct (all modes) F52 
IO-81 
82-89 
L&$ 
F91 
F*91 
F#9 
FZ+O+ss 
F2+ 1 +ss 
F2+2+ss 
Call Forward - Calls From Station ss 
Call Forward No Answer (x = O/1/2/3/4) 
+ Call Forward Busy/No...

5. SINGLE LINE TELEPHONE FEATURES 
DESCRIPTION 
& OPERATION. . 
Features described here pertain to single line telephones and any analog device (FAX, modem, cordless 
phone, etc.) connected to the Star-plus DHS via the 2-Port Analog Adapter and 2-Port Analog Expander. 
5.1 Rules of Operation: 
0 
When setting or changing feature status, the single line telephone (SLT) will hear confirmation tone, . 
which is a long uninterrupted tone indicating successful operation. The user must go on hook and back 
off...

Call - Make an intercom call (2 digits) 1 10-81 
Call - Hunt Grouo 182-89 
 Call - Make an outside line call 
Call - Make a line call on a specific line *3+0-9, *. 
# 
Call - Make a line call by line group (x = O-4) *4 + x 
Call Back Intercom (idle/busv) #91 
1 Call Back Intercom Cancel 
Call Forward No Answer (x = O/1/2/3/4) 
I 
Call Forward Busy/No Answer (x = O-4) #2+5+ss+ 
x I 
1 Call Forward Cancel 
I#2 I 
Call Transfer where ss=station number 
Call Brokering (ss = station number) 
Call Park bv...

5.4 Single Line Telephone Feature Operation 
5.4.1 Authority Code [#55] 
5.4.1.1 Description: 
Any station user may use his own station Class of Service using another station for CO line dialing. 
5.4.1.2 Operation: 
l 
Lift handset. 
a 
Dial #55sspppp (“ss” = the station with the desired authority, “pppp” = that station’s password.) 
5.4.2 Call Brokering 
5.4.2.1 Description: 
Single Line Telephone (SLT) station users may connect to a second party and alternate between 
connections. This feature is...

I-- 
.’ i_ 
5.4.3.4 Operation: 1,. 
While connected to a CO line or intercom call press Hook Flash. 
Intercom dial tone is heard (the party is placed on hold). 
Hang up. 
Notes: 
a. When an intercom/CO line call is placed on Hold and the holding party hangs up, after the Hold 
Reminder time is elapsed, the system will ring the hold activating station with internal or external ring 
signal. If Hold Reminder is disabled, 30 seconds after the call is placed on hold, the system will give 
the holding party...

5.4.6 Call Operator (Call Attendant) [0] 
5.4.6.1 Description: 
The system Attendant station may be easily called by one dialed digit code. At default this code is “0”. 
5.4.6.2 Related Feature: 
None 
5.4.6.3 Related Programming: 
CALL HANDLING - OPERATOR CODE 
5.4.6.4 Operation: 
0 
Lift handset. 
0 
Dial 0. 
Notes: 
a. The code dialed for the system attendant (0 or 9) is dependent on Database Programming of Operator 
Code. If “9” is programmed, that is the code that must be used to call the system...

5.4.8.4 Operation: 
Calls to a station in DND will hear DND Tone. 
5.4.8.5 Setup: 
To set DND: 
l Lift handset. 
l Dial #4. 
To cancel: 
l Lift handset. 
l Dial #4. 
Notes:  
a. 
Reminder Tone is heard each time the user goes off hook to make calls when DND is active to remind 
the user of the DND condition. 
b. When a SLT is in DND, DSS button LED’s at other stations will flash. 
5.4.9 Call Forward [#Z] 
5.4.9.1 Description: 
The SLT user may forward telephone calls to another station, VM or Hunt Group...

5.4.9.4 To cancel Call Forward: 
0 
Lift handset. 
0 
Dial #I. 
54.10 Intercom Calling 
5.4.10.1 Operation: 
l 
Lift handset. 
a 
Dial the desired station, Hunt Group or VM Group number. 
5.4.11 Speed Dialing [*l] 
5.4.11.1 Operation: 
l 
Lift handset. 
l 
Dial “1. 
0 
Dial SPD bin number to dial. 
5.4.11.2 Setup: 
0 
Lift handset. 
0 
Dial #l. 
l 
Dial SPD bin for programmin g. Station Speed Dial bins range from 00-19. 
a 
Enter the desired outside phone number. 
l 
Press Hook Flash. (Confirmation Tone...

5.4.12.4 Operation: 
To access any idle CO line: 
l 
Lift handset. 
e Dial 9. 
To access a specific CO line: 
l 
Lift handset. 
a 
Dial *3c (where “cl’ is the CO line number/code for the desired CO line. 
l-9 = CO lines l-9,0 = CO line 10, * = CO line 1 1 and # = CO line 12.). 
To access any idle CO line in a specific CO line group: 
l 
Lift handset. 
0 
Dial *4g (where “g” is the CO Line Group number desired. Groups are 0 - 4. “0” is any group.). 
Notes: 
a. An SLT station may dial access any CO line...

5.4.15 Call Pickup (Group) [#54] 
5.4.15.1 Description: 
Ringing calls at unattended stations may be retrieved via the Group Pick-Up code, assuming that the station 
invoking the feature is in the same Station Group as the ringing station. 
5.4.15.2 Operation: 
0 
Lift handset. 
a 
Dial #54. 
5.4.16 Camp On Busy Station [2] 
5.4.16.1 Operation: 
When the called station is busy; 
0 
Dial 2 (while listening to Busy Tone). 
5.4.17 Camp On Busy CO Line [#93] 
5.4.17.1 Description: 
A SLT station may Camp On...