Vodavi Starplus Dhs/dhs-e Technical Manual

5-14Message Waiting
Message Waiting
Description
The user is able to send messages to a station and return messages left at their station by 
dialing a feature code.
Operation
Cancel
1. Lift the handset
2. Dial [#] + [
*] + [96] + [ss]
Send
1. Lift the handset
2. Dial [#] + [9] + [6] + [ss]
Where:
ss = Station number (10-81) where the message is to be left
Paging
Description
SLT stations can access through the use of feature codes (Internal, External, and All Call 
Paging services) on the DHS/DHS-E...

Por t Number ing5-15
Operation
When a page announcement is heard: 
1. Lift the handset
2. Dial [#] + [5] + [9]
Port Numbering
Description
Adding SLT stations to the DHS/DHS-E has the significant advantage of port-gain. When 
the SLT interfaces are installed (2-Port Analog Adapter and 2-Port SLT Expansion), the 
station numbering and available station ports are expanded at a ratio of 2-to-1. When 
analog adapters and expansions are installed, the port numbering is as follows:
Table 5-2: SLT Port Numbering...

5-16Port Number ing
 
Operation
When setting or changing feature status, the single line telephone (SLT) will hear 
confirmation tone, which is a long uninterrupted tone indicating successful operation. 
The user must go on hook and back off hook before attempting other call processing or 
feature status changes.
Table 5-3: SLT Port Numbering (DHS-E) 
Card 1 Card 2 Card 3
Digital
PortB1 Sta
NumberB2 Sta
NumberDigital
PortB1 Sta
NumberB2 Sta
NumberDigital
PortB1 Sta
NumberB2 Sta
Number
01 100 148 09 108...

Por t Number ing5-17
†When setting the feature status, the SLT will receive error tone if the feature access 
code combination is incorrect. 
†When error tone is heard, the SLT must hang up and lift the handset again to attempt 
any further operation.
†SLT features DND, Call Forward, and Message Waiting (when a Message Waiting 
indication has been left at the SLT ) alert the SLT user that the feature is active by an 
interrupted (stutter) dial tone.
2-port Analog Adapter
Description
A 2-Port Analog...

5-18Speed Dialing
Speed Dialing
Description
Speed Dialing (SPD) allows SLT users to store frequently dialed numbers. These numbers 
can easily be selected by dialing the Features Access Code plus the Bin Number desired. 
Each station can store twenty (20) Station SPD Numbers in memory Bins (00-19). Each 
SPD Bin may contain up to sixteen (16) digits.
Operation
Dialing
1. Lift handset
2. Dial [✳] + [1]
3. Dial SPD bin number.
Storing
1. Lift handset
2. Dial [#] + [1]
3. Dial SPD bin for programming....

Station Lock5-19
Cancel
1. Lift handset
2. Dial [#] + [✳] + [9] + [2]
Station Lock
Description
The Station Lock/Unlock feature is used to prevent unauthorized outside calling from a 
station that is unattended. The feature code [#97] is also used to program the stations 
private 4-digit password.
Operation
To lock station:
1. Lift handset
2. Dial [#] + [9] + [7] + [pppp] + [#]
Where:
pppp = current password
Password Change
1. Lift handset
2. Dial [#] + [9] + [7] + [pppp] + [new four digit password]...

5-20Tr a n s f e r
Tr a n s f e r
Description
Transfer a call from your station to another station while connected to current call.
Operation
While on a CO Line call:
1. Press Hook Flash
2. Dial Station number within 5 seconds (call will be disconnected after 5 seconds have 
elapsed if station number is not entered).
3. Hang up to complete the transfer.
While on an intecom call:
1. Press Hook Flash
2. Dial Station number
3. Hang up to complete the transfer.
Conditions
†When a CO line call is transferred,...

6
System Programming
It is very important to load default customer data when a system is first installed,
when upgrading software feature packages or when severe power disturbances
cause reason to doubt the customer database integrity. If any of these conditions
exist, please use the 
Power Up Initialization information in Chapters 2 and 3, DHS and
DHS-E Description and Installation
, before proceeding with any customer specific
programming. 
Customer Database programming is protected from loss during...

PC Programming6-1
PC Programming
The Feature Package 3 software allows the service technician to program the STARPLUS® 
DHS/DHS-E™ system using an external, PC-based, Windows software programming 
tool. The Windows software tool streamlines programming and allows for database 
printout and reserve storage. Operation of the Windows software is not covered in this 
text. There are two versions of Windows DBA: one for DHS
 and one for DHS-E
. On-line 
help is provided within the software tool to assist...