Vodavi Starplus Dhs/dhs-e Technical Manual

6-32Resource Configuration
User Password
Each station in the system is assigned a default password of 0000. This may be changed if 
the associated security feature operation (Phone Lock, Remote COS, etc.) is required. This 
allows the password to be viewed but not modified.
Default
The DHS/DHS-E User Password is 0000, and has a programmable range from 0000-9999.
User Names
A User Name may be assigned to each station in the system. This can be useful as an 
administrative aid as well as providing a user...

Resource Configuration6-33
Preprogrammed Messages
Two types of Preprogrammed Messages; OUTGOING MESSAGE and EXECUTIVE NOTIFY. 
The OUTGOING MESSAGE works with Message Wait and allows the Executive Key 
Telephone user to leave a text message at another Executive Key Telephone.
EXECUTIVE NOTIFY is a message that may be enabled to notify other Executive Key 
Telephone callers of the users status. This message will be displayed whenever another 
Executive Key Telephone user calls the Executive station with...

6-34Resource Configuration
Default
By default, all DHS/DHS-E System Speed Bins are EMPTY, and the allowable 
programmable digits are: Digits (0-9) [✳], [#], pause (F + [7] +[0])Flash (F + [3]), and 
(F + [1]+ nn) for chaining (up to 16 characters).
Background Music (BGM)
A second music source may be connected to the system for listening at key telephone 
stations. If this source is not used it may be desirable to disable that BGM channel. When 
BGM is set to N the second music source will not be...

Resource Configuration6-35
System Time
Provided to set system time and date information. Use the prompts displayed to set the 
fields:
†YEAR
†MONTH
†DAY
†WEEKDAY
†HOUR
†MINUTE
Account Code Table
When a station is Forced Account Code (must enter an account code to dial any outside 
telephone number), the account code entered is verified against the entries in this table. 
Up to 100 entries may be made in the Account Code Table. The account code length may 
be 4-8 digits in length to increase the security...

6-36Resource Configuration
Data Link
The DHS/DHS-E Data Link programming option is not implemented at this time. This is a 
future CTI function.
RMT X_RATE
The DB-9-pin RS232 port labeled ICLID/PC PROGRAMMING can be connected to a 
modem or directly to a Personal Computer to use the PC based Database Programming 
software. RMT X_RATE is the baud rate setting of this port.
Default
The DHS/DHS-E RMT X_RATE is 9600 baud, and the range is programmable from 110/300/
600/1200/2400/4800/9600/19200.
SMDR X_RATE...

Restriction Configuration6-37
Default
The DHS/DHS-E Dial Tone Detect is set to (N) disabled, and can be toggled from (Y/N).
Related Programming
Refer to “Dial Wait Time” in the Call Handling Configuration section of this Chapter.
Dial Wait Time
Similar to the Dial Tone Detect feature, Dial Wait Time can be used to delay out dialing 
based on a timer instead of a Tone Detector for applications where the provided dial tone 
cannot be properly detected by the built-in Tone Detectors. This feature should...

6-38Restriction Configuration
Consider the default entry in Table bin 001 where the From entry is 0 and the To entry is 9 
(refer to Table 6-5 ). In this case, (default) stations assigned a COS corresponding to the 
table (default) can dial any telephone number so long as the first dialed digit is a 0-9. 
A specific number may be allowed for any COS by using a table entry with a constricted 
range. Consider a table programmed as: From 1800 To 1800. This table entry allows the 
user assigned the...

System Applications6-39
System Applications
If the system is in the programming mode, continue using the [back] and [next] Soft 
Buttons to scroll to the desired programming field. If starting to program here, enter the 
programming mode. 
Refer to “Program Mode Entry”. Also, refer to Table 6-1: Database Programming Table for 
the complete list of programmable features and their default values.
Station Hunt Groups
Description 
Up to eight hunt groups may be assigned. Hunting is always in a linear...

6-40System Applications
Related Programming
Refer to “Voice Mail Port” in the Station Programming section of this Chapter.
Voice Mail
Description 
When a voice mail system is connected to the DHS/DHS-E via SLT ports the operation of 
the voice mail system can be greatly enhanced by preprogramming digit code strings 
that allow the caller entering voice mail to be diverted to the appropriate menu level. The 
code that must be entered may be different depending on the call type (CO transfer to 
VM,...

System Applications6-41
Default
The DHS/DHS-E default settings of associated (Voice Mail Integration) data fields are listed 
below:
†ICM PREFIX =
 Empty
†RECORD DGT= Empty
†ICM SUFFIX =
 Empty
†XFR SUFFIX =
 Empty
†DIS DGT =
 Empty
Programmable Range
The programmable range for the DHS/DHS-E Voice Mail Integration fields are listed 
below:
†ICM PREFIX = 0000-9999,####, ✳✳✳✳✳
†XFR PREFIX = 0000-9999,####, ✳✳✳✳✳
†ICM PREFIX = 0000-9999,####,✳✳✳✳✳
†ICM SUFFIX = 00-99,##, ✳✳✳
†XFR SUFFIX= 00-99,##, ✳✳✳
†DIS...