Vodavi Starplus Dhs/dhs-e Technical Manual

5-4Authority Code
Authority Code 
Description
Any station user may use his own station Class of Service using another station for CO line 
dialing.
Operation
1. Lift handset
2. Dial [#] + [5] + [5] + [ss] + [pppp]
Where:
ss = the station with the desired authority)
pppp = that station’s password
Call Back
Description
When the SLT user calls another system station that is busy he may leave a Call Back 
request at the station. When the Call Back request is invoked, the SLT station will ring 
when the busy...

Call Brokering5-5
Call Brokering
Description
Single Line Telephone (SLT) station users may connect to a second party and alternate 
between connections. This feature is desirable when an SLT user wants to maintain the 
connection of the parties and at the same time keep them separate from each other. 
Operation
While engaged on an intercom or CO line call:
1. Press Hook Flash. The original conversation party is placed on hold.
2. Dial the next station or CO line call.
When the new party answers:
1. Press...

5-6Call Operator (Call Attendant)
Cancel
1. Lift handset
2. Dial [#] + [2]
Direct (All Call)
1. Dial [#] + [2] + [2] + [xx]
Where:
xx = destination desired
Follow Me Forward
1. Dial [#] + [2] + [3] + [ss] + [pppp]
Where:
ss = station number to forward to this location
pppp = password of the station to forward
Idle
1. Dial [#] +[2] + [0] + [xx]
Where:
xx = destination desired
No Answer
1. Dial [#] + [2] + [4] + [xx] + [t]
Where:
xx = destination desired
t = time to ring before forwarding; 0 =10 seconds,...

Call Park Answer5-7
Call Park Answer
Description
SLT users can retrieve calls that have been placed into Call Park status, by dialing the Call 
Park Answer Feature Code plus the station number or the CO Line number.
Operation
1. Lift handset
2. Dial [#] + [7] + [3] + [0] + [c]
OR
1. Lift handset
2. Dial [#] + [7] + [3] + [sn]
Where:
sn = Station Number. 
c = CO line number/code for the desired CO line: (1-9) = CO lines (1-9), 0 = CO line 10, 
[✳] = CO line 11 and (#) = CO line 12.
Call Pickup 
Direct...

5-8Camp On
Camp On
Busy Station
Description
An SLT station may Camp On to a busy station. While listening to busy tone after dialing 
the station number, the SLT user dials the Camp On feature code.
Operation
When the called station is busy:
1. Dial [2] while listening to the Busy Tone.
Busy CO Line 
Description
An SLT station may Camp On to a busy CO line.
Operation
When a CO line access attempt results in Busy Tone:
1. Dial [#] + [9] + [3] while listening to busy.
Cancel
1. Lift handset
2. Dial [#] +...

Do Not Disturb (DND)5-9
Specific Line
To access a specific CO Line:
1. Lift handset
2. Dial [✳] + [3] + [c] 
Where c = the CO line number/code for the desired CO line: 1-9 = CO lines (1-9), 
0 = CO line 10, [✳] = CO line 11 and # = CO line 12.
Conditions
†An SLT station may dial access any CO line that has been allowed in database 
programming.
†The dial codes 9 and 0 are mutually exclusive. When one or the other is programmed 
as the Operator Code the remaining is assigned for out dialing at SLT...

5-10Flash
Flash
Description
This feature allows CO/PBX line users working behind a Centrex or PBX line to generate a 
hook-flash over that line to access features or transfer calls.
Operation
While connected to a CO/PBX line:
1. Press flash
2. Dial [#] + [3]
Hold
Flash
Description
CO line calls and ICM calls may be placed on Hold. 
Operation
While connected to a CO Line:
1. Press Hook Flash
2. After a 5 second delay, dial tone is heard, and the party is placed on hold.
3. Hang up
While connected to an...

Hold5-11
†To answer Hold Recall at an SLT, lift the handset (refer to Chapter 4, Keystation Features 
and Operation, “Transfer”).
†This feature may need to be adjusted on some telephones for proper operation (refer 
to Chapter 6, System Programming, “Call Handling Configuration”).
Retrieve 
Description
Since multiple calls may be placed simultaneously at an SLT, the Call Hold Receive feature 
may be used to access a call previously placed on Hold.
Operation
When the SLT user wishes to retrieve a held...

5-12Hot Line (Ring Down)
Hot L ine (Ring Down)
Description
This feature allows you to use the associated single line telephone (SLT) port for 
automatic signaling to a predetermined destination. When the feature is enabled, the 
destination will be signaled whenever that SLT goes off-hook. You may hook-flash at the 
SLT where the feature is enabled so that you can request intercom dial tone to perform 
other functions and change or disable the feature when no delay time is programmed. 
You can set up the...

Intercom Call5-13
Cancel
1. Lift the handset
2. Dial [#] + [#] + [4]
Operation
1. Go off-hook
2. Wait for the delay time to expire.
Conditions
†Operation of Hot Line to a Station, Speed Dial Bin or CO line, that is not valid or 
programmed, results in an error tone.
†If the programming parameter SYSTEM TYPE is set to KEY, you will hear an error tone 
if the Hot Line feature is set for a CO line group.
†If the SYSTEM TYPE was set to PBX but later changed to KEY, operation of Hot Line to 
a CO line group...