Vodavi Starplus Dhs/dhs-e Technical Manual

4-80Page
Conditions
†Stations initiating internal pages may receive error tone if not stations are available in 
page group. External paging in unaffected.
 Meet Me
Description
Anyone paging internally or externally may be answered for a private Meet Me 
connection. After hearing the page, you can dial the Meet Me Page code from any 
telephone and be connected to the person paging. During a Meet Me Page, the internal 
and external paging zones are released and new pages may be initiated. 
Operation
1....

Pause4-81
Pause
Description
You can insert a pause to generate an intentional delay in dialing on outgoing CO line 
calls. A pause or a combination of pauses may be stored in the Speed Dial bins to allow 
timed access to special services, while allowing you to monitor the progress of the call. A 
pause will appear as P on an Executive Telephone display. Last Number Redial will 
remember any pauses dialed manually.
Operation
1. During dialing on any CO line or when programming a Speed Dial bin (refer to...

4-82Station Lock/Unlock
2. If the digit [9] is dialed, the DHS is aware that this call is being placed on a PBX trunk 
(outgoing call).
3. A hyphen (-) is inserted automatically after dialing 9 for better display clarity. 
Subsequent digits dialed are displayed after the hyphen.
Conditions
†The PBX access code may be 1 or 2 digits.
†After entering PBX access code, the system will automatically stop dialing for a 
specified time (1 - 9 secs programmable) and then continue the dialing. 
Station Lock/Unlock...

Station Lock/Unlock4-83
3. Dial your password.
4. Dial [#].
To unlock the telephone:
1. Press [FEAT ].
2. Dial [9] + [7].
3. Dial your password.
4. Dial [✳].
To change your password:
1. Press [FEAT ].
2. Dial [9] + [7].
3. Dial your current password.
4. Dial the new password.
Executive Telephone
To program Station Lock/Unlock:
1. Press [FEAT ].
2. Dial [9] + [7]. The display shows:
3. Dial your password (default is 0000).
4. Press [show]. The display shows:
To lock the telephone:
1. Press [yes]. The...

4-84Privacy
3. Press [save].
Conditions
†When your telephone is locked you can only make intercom calls. You may still 
answer calls and held lines while your telephone is locked. This includes speed dial 
access and CO lines marked as toll override.
†If you accidentally forget your password it may be retrieved through the system 
database administration password. 
†The Attendant designated station private password is used to enter Attendant 
Administration.
†If you try to make a CO line call from a...

Private Line4-85
1. Press that CO line button. A conference is established and the user that originated the 
call is the conference controller. The controller display reads:
2. Your telephone display shows:
Where “ss” in each display indicates the station numbers that are joined in the call.
Conditions
†If there are already four parties joined together, further attempts by other stations to 
join the CO line conversation will receive busy indication.
†A telephone must have a CO line button appearance of...

4-86Recall ( Transfer Recall)
Operation
1. As you dial on a dial pulse CO line, dial [✳]. All subsequent digits will be sent as DTMF 
digits.
Conditions
†The dialing conversion can only be from Pulse Mode to Tone (DTMF) mode.
Recall ( Transfer Recall)
Description
Transferred CO lines will recall to the transferring station if the call is unanswered after 
the Recall Time expires. During the recall, the outside party continues to hear the transfer 
Ring Back tone, and the CO line returns to System Hold....

Ringing Line Priority4-87
Ringing Line Priority
Description
Ringing Line Priority is a system-wide feature that automatically connects incoming calls 
based on a predetermined priority. The ringing station is automatically connected to the 
priority ringing facility, upon lifting the handset or pressing the [SPKR] button.
Ringing Line Priority can be overridden at the station by first pressing a direct appearing 
line, CO line group, feature button or by dialing an intercom number on hook.
The priority...

4-88 Station Message Detail Recording (SMDR)
Conditions
†The SDN is a maximum of 16 digits.
†If the SDN buffer is empty, the display will show NO SAVED NUMBER. 
†If all CO lines are busy, the display will show ALL CO LINES BSY.
Station Message Detail Recording (SMDR)
Description
This feature allows the system administration to track all incoming and outgoing CO line 
traffic. Station Message Detail Recording (SMDR) is output from the SMDR RS232 serial 
port located on DHS-E Central Processor Board or the...

Station Message Detail Recording (SMDR) 4-89
Table 4-11: SMDR (Data Examples)
STA TRK DGT_DIALED RING DATE TIME DURATION ACCOUNT BR CMT
XX XX XXXX...XXXX MM:SS XX/
XXHH:MM:SS HH:MM:SS XXXXXXXX XXX
X
11 01 00:00 01/02 11:15:55 00:00:47 $ LNH
10 03 12345678901234  01/02 11:10:36  00:02:54  12345678 $ LNC
14 01 555-1212 01/02 11:09:43  00:00:51  $ LNC
10 01 00:32 01/02 11:15:36 00:00:52  $ LNC
11 01 00:00 01/02 11:15:36 00:00:47  $ LNC
11 01 443-6000 01/02 01:53:36 00:00:33 $ LNC
21 02 602-443-6000 00:03...