Trillium Panther Ii Feature Module Iv System Manual

Mite1 Standard Practise 
Pause Duration for Automatic Access 
DTMF strings identify the type of call to the voice mail system (see Table 5-5) during 
automatic access. As previously indicated, these DTMF strings can include Pause signals. 
You can program the duration of the Pause signal to the specific duration required by your 
voice mail system. 
To program the Pause duration: 
Step 1 Dial *Ml5 on the Panther II Display Set at Station 10 
Step 
2 Dial access code 057 
Step 3 Enter data code of the...

Panther II 820/1032/2064-297 
To program the Transfer Ringing Time 
Step 1 Dial *#015 on the Panther II Display Set at Station 10 
Step 2 Dial access code 017 
Step 3 Enter data code of the desired setting (Table’S- 10) 
Step 4 Press the # key to store the data 
Step 5 Press the * key to exit programming 
FEATURE ACCESS 
CODE CONDITIONS DATA 
CODE 
10 seconds 0 
20 seconds 1 
Transfer 
30 seconds 2 
Ringing 017 
Time 45 seconds 3 
1 minute 4 
1.5 minute 5 
Until call is Answered 
6 
Defaulr 
30 seconds...

Mite1 Standard Practise 
Examples of Call Forwarding to Voice Mail 
External Incoming Call to Voice Mail by Call Forwarding 
Figure 5-2 shows an example of an external incoming call being directed to a voice mail 
box using the Call Forwarding feature. The steps listed below are shown in Figure 5-2. 
1. 
2. 
3. 
4. 
5. 
6. 
7. Ian calls in on line 03 to Tony’s station. 
Tony’s station is programmed to ring for line 03, but Tony has programmed his set for 
Call Forward Follow Me to Station 20. 
Ian’s call...

Panther II 820/1032/2064-297 
TONY 
(Station 12) 
. . . . . . . . . . . . . . . . . . 
PROGRAMMING 
Assume the system has been programmed with the following: 
Automatic Access is programed for the following: Data string=valid; Station/line=valid 
Station 12 is programmed with Call Follow Me to ONS Station 20 
Data string for Call Forward Follow Me of a C.O. call = PPD 
The voice mailbox for station 12 is programmed as 02 
The data suing for the Message Waiting is left as the default A 
The data string...

Mite1 Standard Practise 
Internal Call to Voice Mail by Call Forwarding ./ 
2 
Figure 5-3 shows an example of an internal call being directed to a voice mail box by Call 
Forwarding. The following steps are illustrated in Figure 5-3: 
1. 
2. 
3. 
4. 
5. 
6. 
7. Sue places an internal call to Lilianna. 
Lilianna is busy on her phone, but she has programmed her set for Call ForwardBusy 
to Station 17, so Sue’s call is forwarded to Station 17. 
Station 17 is connected to a port on the ONS Unit which is...

Panther II 820/1032/2064-297 
Sue 
(Station 11) Liliana 
(Station 16) 
. . . . . . ..a.......... 
ONS Unit Voice Mail Unit 
 
KSU 
PROGRAMMING 
Assume the system has been programmed with the following: 
Aummatic Access is programed for the following: Data string=valid; Station/Xne=valid 
Station 16 is programmed with Call Forward Busy to ONS Station 17 
Data string for Call Forward Busy of an internal call = A*D 
The voice mailbox for station 16 is programmed as 155 
The data string for the Message...

-- 
.i” : ,_. : . . . 
.;,..:, ., 
,‘- _ 
‘, _ .’ i ‘.i i ., ,. _, ..:’ ‘, I. ‘. . . -, :,-: :. ,. ‘. 
INTERFACE HARDWARE 
91-0556-1Az kc 1989 Printed in U.S.A. TRILLIUM hkphoner~stellm 
F-3623-l  

Trillium Standard Practice Panther II 820/1032/2064-296 
91 - 0566 - 1A Issue 1, October, 1989 
Panther 0 II 820/1032/2064 
Electronic Key TeIephone System 
FEATURE MODULE II 
& OPTIONS INTERFACE HARDWARE 
TABLE OF CONTENTS 
PAGE 
1. INTRODUCTION 
GENERAL 
REASON FOR ISSUE 
2. FEATURE MODULE IT SOFTWARE 1 
GENERAL 
1 
INSTALLATION 
1 
Initial Installation 
2 
Replacing the Feature Module Cartridge 3 
ADDITIONAL FEATURES 5 
Additional Programmable Feature Keys 5 
Transfer Ringing Return Displays 7 
Remote...

Trillium Standard Practice 
0 Copyright 1989 of Mite1 Corporation. All rights reserved. 
8 is a Registered Trademark of Mite1 Corporation. 
I 
Feature Module II & Options Interface Hardware 
Page ii 
I  

Panther II 820/1032/2064-296 
1. INTRODUCTION 
GENERAL 
1.01 This Practice provides instructions for installing and programming Panther II 820/ 
1032/2064 Systems with Feature Module II and Options Interface Hardware. 
REASON FOR ISSUE 
1.02 This is the first issue of this Practice. It is one of the set of Practices written to 
assist a craftsperson install, operate and maintain the system in the field. 
2. FEATURE MODULE II SOFTWARE 
GENERAL 
2.01 In addition to providing the Panther II features...