Trillium Panther Ii Feature Module Iv System Manual

Mite1 Standard Practise 
ACCESS CODE 1 LJNESELECT 1 DATA CODE 
113YY 
I 
Auto Intercom 
Manual Line Select  Auto C.O. 0 
7 2 1 
Default: Auto Intercom Note: YY=station number (10-73) 
Table 5-3: Line Select 
Table 5-4: ONS Station Features (continued on 
page271 
Feature Module IV & On Premise Station Unit 
Page 26  

Panther II 820/1032/2064-297 
ACCESS 
I I CODE DEFAULT 
Tenant Groups 121YY No preprogrammed Tenant Groups 
Zone Paging Groups 122YY 
No preprogrammed Zone Groups 
Prime Line Preference Groups 123YY 
No preprogrammed Prime Line 
Intercom Tenanting/ 
Preference Groups 
Station Hunt Groups 
Hunt Groups 124YY 
I I 
All station in Group 1 
Pickup Groups 
1 125YY 1 All Stations in Group 1 
Note 1: 
Note 2: 
Note 3: 
Note 4: 
Note 5: 
An ONS station has Ringing Line Pickup, regardless of whether it is...

Mite1 Standard Practise 
To set Call Forwarding on or off, at an ONS single-line set, 
Step 1 Lift the handset 
Step 2 Dial *# 
Step 3 Dial one of the following codes to specify the type of call forwarding: 
2lfl for Follow Me (external, internal, internal 
DISA and transfer ring calls); 
22YY for 
Call Forward Busy (external, internal, internal DISA and transfer ring calls); 
23YY for Call Forward No Answer (external, internal, internal DISA calls); 
24YY fo,Cusy/No Answer (external, internal, internal...

Panther II 820/1032/2064-297 
Step 12 Return to the Panther II Display Set at station 10. 
Step 
13 Dial *#IO15 to enter programming mode. 
Step 14 Dial access code 1OOYY (Type of Set) where YY is the ONS station 
number of the voice mail system or auto attendant). 
Step 
15 Enter 6 for a voice mail system, or 7 for an auto attendant. 
Step 16 Dial * to exit programming mode. 
Step 17 
Unplug the power cord to the ONS unit. After waiting several 
seconds reconnect the power to the ONS Unit. 
Unplug the...

Mite1 Standard Practise 
Programming Automatic 
Access. to a Voice Mail System 
5.03 You can program the ONS Unit to allow Panther station users to forward their 
calls directly to their voice mailboxes. When the system has been programmed for auto- 
matic access people can redirect their incoming calls to their voice mailboxes simply by 
call forwarding their sets to the ONS station number of the voice mail system 
To enable automatic access, you must program DTMF digit strings into the ONS Unit 
that...

Panther II 820/1032/2064-297 
NO. 
1 
2 
3 
4 
5 
6 
7 
8 
9 
10 TYPE OF CALL 
External Incoming Forwarded Call 
or 
Internal DISA Forwarded Call 
or 
Note: PP= Pause, Pause. The digit string for each type of call defaults to PP. You must change the 
PP for each type of call to the digit string required by the voice mail system. 
It’s also 
possible to change the duration of the Pause signal using system programming. 
(Refer to Table 5-9) 
Table S-5: Programming Digit Strings for the Type of Call 
Step 4...

Mite1 Standard Practise 
Example: 
Display Set LCD 
Step 5 
Step 6 Repeat steps 2 to 4 for each type of call that you want the voice mail system to 
recognize. 
Press the 
Speaker key. The Intercom lamp turns off. The display returns to 
showing the date and time. 
Item No. 9 in the Table 5-5, Message Waiting, is a DTMF digit string that’s sent from the 
voice mail system to the ONS Unit. A caller, forwarded from a station to the station’s 
voice mailbox, can leave a message. If the caller leaves a...

Panther II 820/1032/2064-297 
Programming Voice Mailbox Numbers 
Each Panther station that requires a voice mailbox, requires a mailbox number. The 
mailbox number, which can be from one to three digits in length (i.e., 0 to 999), is pro- 
grammed into the ONS Unit. The mailbox numbers are determined by the voice mail 
system and you must refer to the manufacturer’s documentation to determine what they 
can be. The voice mailbox numbers for the stations default to the Panther Station number 
(e.g.,...

Mite1 Standard Practise 
To confii the mailbox numbers that you’ve stored: 
Step 1 Press the 
Display key on the Panther II Display Set at the Master Attendant 
Station. The Intercom lamp turns on steady and the display is blank. 
Step 2 Press the 
Speed key. 
Step 
3 Enter the #YY where IT is the station number. The voice mailbox number 
for that station will be displayed. 
Step 4 Repeat steps 2 and 3 for each mailbox number that you wish to confirm. 
Step 5 Press the 
Display key. The Intercom lamp...

Panther II 820/1032/2064-297 
ACCESS CONDITION 
FEATURE DATA 
CODE 
DATA STRING 
STATION/LINE NUMBER CoDE 
Not Valid Not Valid 
0 
Automatic 
058 Valid Not Valid 
1 
Access 
Not Valid Valid 
2 
Valid Valid 
3 
Default: Data code 1 
Note: This table doesn’t apply to the Message Waiting signal that’s sent from the VM system to the ONS 
Unit 
Table 5-7: Setting Conditions to Automatic Access 
DTMF Digit Timing 
When you dial the voice mailbox from a Panther set, the DTMF tones generated by the 
ONS Unit are...