Home
>
Toshiba
>
Communications System
>
Toshiba Stratagy 4/6/24 Installation And Maintenance Manual
Toshiba Stratagy 4/6/24 Installation And Maintenance Manual
Here you can view all the pages of manual Toshiba Stratagy 4/6/24 Installation And Maintenance Manual. The Toshiba manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 61
STRATAGY 4/6/24 INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994 TABLE OF CONTENTS Chapter 5 - Configuring and Backing Up Stratagy PARAGRAPH SUBJECT PACE 1 Introduction ________________________________________----------------------------------------------------------------- 5-j 2 Accessing, Using, and Exiting the Stratagy Configuration Utility ------------------------------------- 5-l 2.1 Accessing the Stratagy Configuration Utility ________________________________________--------------------...
Page 62
STRATAGY 4/6/24 INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994 CHAPTER 5 CONFIGURING AND BACKING UP STRATAGY 1 INTRODUCTION This chapter provides detailed information about using the Stratagy Configuration Utility. This utility allows you to: n ‘ 1 n n H Back up the Stratagy system Define Stratagy system configuration options Install Stratagy software from the floppy disk drive Select a Toshiba telephone switch or plug and play integration Define how Stratagy and other...
Page 63
STRATAGY 4/6/24 INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994 Stratagy starts shutdown. If any ports are in use, Stratagy delays shutting down the system for 60 seconds. At that time, Stratagy completes shutdown, cutting off any callers or users that are still active. When shutdown is complete, the Stratagy Configuration Utility Menu displays. See Figure 5-1 for the Stratagy Configuration Utility Menu. Only items 1 through 4 will appear on a Stratagy 4 system. Stratagy Configuration...
Page 64
STRATAGY 4/6/24 INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994 Select Restore to restore previous backed up files on Stratagy. Proceed to “Restoring Stratagy.” Select Quit to return to the Stratagy Backup Utility Menu. 3.2.1 BACKING UP STRATACY To back up Stratagy, proceed as follows: n The second menu displays backup information: n backup set (files to be backed up) DATABASESET (database) GREETINGSET (greetings) MSGS.SET (messages) backup from (drive) backup to (drive) backup type...
Page 65
STRATAGY 4/6/24 INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994 . . The Stratagy System Configuration Screen is split into 4.2 EXITING THE STRATAGY SYSTEM two areas, the left screen area lists the actual options .: and their values, the right screen area lists context CONFIGURATION SCREEN - sensitive help for each option. See Figure 5-3 for a When you have finished defining the Stratagy System sample Stratagy System Configuration Screen. For a list Configuration options, press Esc to return to...
Page 66
STRATAGY 4/6/24 INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994 PARAMETER active-hold DESCRIPTION Controls how a caller must select to hold for a busy extension. TRUE Caller must continue pressing * to hold for a busy extension, enter another extension, or leave a message at the tone. FALSE Caller selects * once to hold for a busy extension and the system allows the caller to hold until he is either transferred, selects another extension, or presses * again to leave a message. Possible...
Page 67
STRATAGY 4/6/24 INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994 ‘ PARAMETER begin-ret-prompt DESCRIPTION Controls whether the system says “Begin recording at the tone, . . . or hang up” before taking a message. This also affects the “to re-record press 2” and “to append press 3 menu selections during the record menu that is given after a recording. TRUE: The system plays the above prompt. FALSE: The system does not play the above prompt. The caller only hears a tone. Possible values: true,...
Page 68
STRATAGY 4/6/24 INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994 PARAMETER clock-sync DESCRIPTION Whether the system tries to re-synchronize the DOS software clock with the PC hardware clock. It may be useful to turn this off (by setting it to FALSE) if you have another utility controlling the PC clock. TRUE Stratagy re-synchronizes the DOS software clock with the PC hardware clock. FALSE Stratagy does not re-synchronize the clocks. Possible values: true, false Default: true cmt-maxlen...
Page 69
STRATAGY 4/6/24 INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994 PARAMETER dtmf-gate DESCRIPTION Before dialing any User ID extension field Stratagy first verifies that DTMF was entered since the call last accessed the User ID (usually 991) specified in the DONE Chain of the initial User ID (usually 990). This “gate” prevents the transfer of a dead/phantom call to the operator on those switches that do not have disconnect supervision. Stratagy does not perform the “gate” action when the...
Page 70
STRATAGY 4/6/24 INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994 PARAMETER guest-defaults DESCRIPTION User ID to use for the default values when creating a new guest User ID. The field values in the default guest User ID are copied into a guest User ID upon initialization. Note: n Not all fields are copied. Comment, Extension, and Directory Name fields are initialized separately. If a Security Code is defined, it uses it as the default instead of using the User ID as the default. H All...