Toshiba Strata E Electronic Key Telephone System Installation And Maintenance Manual

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 32 
PROGRAM 1XY 
TOLL RESTRICTION CLASS AREA CODE ENTRY 
(LCD TELEPHONE REQUIRED) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
Normal functions halt on station 1’3/17. 
LCD is blank. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
LCD is blank. 
3) Dial flia (Allow), iJHa (Deny) or Pafl(Display) SPKR LED flashes continuously. 
as required. (X = Restriction class 1...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
TABLE 33 
PROGRAM IX2 
TOLL RESTRICTION CLASS OFFICE CODE ENTRY 
(LCD TELEPHONE REQUIRED) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. .- 
Normal functions halt on station 13/17. 
LCD is blank. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
LCD is blank. 
3) Dial $lga (Allow), iaa(Deny) or aEja(Display) SPKR LED flashes continuously. 
as required. (X = Restriction...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 34 
PROGRAM 2XY 
TOLL RESTRICTION AREA/OFFICE CODE EXCEPTION TABLE . 
(LCD TELEPHONE REQUIRED) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13117 LED 19 on. 
System is in program mode. 
Normal functions halt on station f3/17. 
LCD is blank. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
LCD is blank. 
3) Dial aR0, (X = Table 1 - 8). LCD displays dialed number, then shifts left to pro- 
vide space for next...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
-JANUARY 1988 
TABLE 35 
PROGRAM 1X1 
TOLL RESTRICTION CLASS AREA/OFFICE CODE EXCEPTION TABLE SELECTION 
1 SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. 
Normal functions halt on station 13/l 7. 
2) Depress the m key on station 13/l 7. 
SPKR LED steady on. 
3) Dial pf3a on the dial pad. (X = Restriction class SPKR LED flashes continuously. 
1 - 4, as defined in Program 6xX.) The various LEDs indicate...

PHUliHAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 36 
PROGRAM l#OO 
LEAST COST ROUTING HOME AREA CODE ENTRY 
(LCD EKT REQUIRED--STRATA Vie only) 
I . 
1 SET LED on. 
1) Lock in the SET switch on the HKSU. Station 17 LED 19 on. 
System is in program mode. 
Normal functions halt on station**l7. 
LCD: PROGRAM MODE 
2) Depress the m key on station 17. SPKR LED steady on. 
LCD: PROGRAM NO.? 
3) Dial 0 114 on the dial pad. SPKR LED flashes continuously. 
LCD: DATA = (indicates present data) 
4)...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
TABLE 37 
PROGRAM 1 #OX 
LEAST COST ROUTING SPECIAL CODES 
(LCD EKT REQUIRED-STRATA Vie only) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 17 LED 19 on. 
System is in program mode. .- 
Normal functions halt on station 17. . 
LCD: PROGRAM MODE 
2) Depress the m key on station 17. SPKR LED steady on. 
LCD: PROGRAM NO.? 
3) Dial flaaa on the dial pad. X = 1 - 5 corre- SPKR LED flashes continuously. 
sponds to five different special...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 38 
PROGRAM 1#06 
LEAST COST ROUTING PARAMETERS 
(LCD EKT REQUIRED-STRATA Vie only) I 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 17 LED 19 on. 
System is in program mode. 
Normal functions halt on station I?‘. 
LCD: PROGRAM MODE 
2) Depress the m key on station 17. SPKR LED steady on. 
LCD: PROGRAM NO.? 
3) Dial pfli 1 on the dial pad. SPKR LED flashes continuously. 
LCD: (displays program number) 
Various LEDs indicate...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
TABLE 39 
PROGRAM 1#07X 
SELECT LONG DISTANCE INFORMATION (LDI) ROUTE 
(LCD EKT REQUIRED-STRATA Vie only) 
1) Lock in the SET switch on the HKSU. 
2) Depress the m key on station 17. 
3) Dial flaBa on the dial pad. 
4) Refer to the System Record Sheet. 
Using the dial pad, enter X (X = 1 - 8, corre- 
sponding to one of eight route table 
numbers). 
5) Depress the m key to place new data in 
memory. 
6A) Go to Step 2 in another program table 
....

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 40 - 
PROGRAM 1#08X 
SELECT LOCAL CALL ROUTE 
(LCD EKT REQUIRED-STRATA Vie only) _ 
SET LED on. 
1) Lock in the SET switch on the HKSU. 
2) Depress the m key on station 17. 
3) Dial iiafl on the dial pad. 
4) Refer to the System Record Sheet. 
Using the dial pad enter X. X = 1 - 8, corre- 
sponding to one of eight route table numbers. 
5) Depress the m key to place new data in 
memory. 
6A) Go to Step 2 in another program table 
. . . or ....

TABLE 41 PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
PROGRAM I#09 
DIAL ZERO (0) TIMEOUT 
(LCD EKT REQUIRED-STRATA Vie only) 
1) Lock in the SET switch on the HKSU. 
2) Depress the m key on station 17. 
3) Dial flaii on the dial pad. 
4) Refer to the System Record Sheet. 
Using one key (00 - 03), turn its associated 
LED ON or OFF as required. 
NOTE: 
Only one LED may be on at a time. 
5) Depress the m;n;l key to place new data in 
memorv. 
6A) Go to Step 2 in another program table 
. ....