Toshiba Strata E Electronic Key Telephone System Installation And Maintenance Manual

PROGRAMMING PROCEDURES 
SECTION 300-020-300 
JULY 1986 
m 
2 
2 
2 
2 
2 
2 
## SYSTEM PROGRAMMING ## 
(DFITR = DIRL NUMBER) 
11 212 
14 
21 
24 472 
495 
669 
(DFITA = 
DIRLNUNBER) 
317 
628 
629 
(DATFI= - 
DIAL NUMBER) 
a1 
El4 
END OF PRINT ## .- 
FIGURE L-SAMPLE PRINTOUT OF PROGRAM 2XY 
## SYSTEM PROGRAMMING ## 
l:SELECT(LED ON) 
21 16 15 8 7 1INT 
3 10 111111 11111111 11111110 
3 11 111111 11111111 11111110 
3 12 111111 11111111 11111110 
3 13 111111 11111111 11111110 
3 14 111111 11111111 11111110...

PROGRAMMING PROCEDURES 
SECTION 300-020-300 
JULY 1986 
## SYSTEM PROGRfWlING !Xt 
.*- 
4# 10 10 20 CO10 co20 
09 19 COY co19 
08 18 CO8 CO18 
07 17 co7 co17 
06 16 CO6 CO16 
05 1.5 co5 co15 
04 14 co4 co14 
03 13 co3 co13 
02 12 co2 co12 
01 11 co1 
co11 
. . 
4# 65 x 
99 A03 MWFL 
* 
98 a02 DND 
* 
97 FiOl REP 
06 96 CO6 RDL 
05 95 co5 PAU 
04 94 co4 AC8 
03 93 co3 PRV 
02 88 co2 MC0 
01 87 co1 CFD 
00 85 INT SAVE 
NOTE: 
Columns I and2 give the code for the 
feature assigned to each key; columns 
3...

PROGRAMMING PROCEDURES 
SECTION 300-020-300 
JULY 1986 
#tt REPERTORY DIAL !Xt 
800 *60 17147305000 
#00 *61 19142731750 
#00 62 1213.5551212 
#00 63 17148531212 
800 X64 17145551212 
#00 *65 17147305000 
#00 66 19142731750 
#00 *67 12135551212 
#00 68 17148531212 
#00 69 17145551212 
#00 *70 17147305000 
it00 *71 19142731750 
#00 *72 1213.5551212 
ix00 *73 17148531212 
Et00 
*74 1714S5.51212 
#00 x7.5 17147305000 
u00 *76 19142731750 
Et00 *77 12135551212 
#00 978 17148531212 
#00 *79 17145551212 
#00...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
TABLE 5 
PROGRAM 01 
SYSTEM ASSIGNMENTS (BASIC) 
1) Lock in the SET switch on the HKSU. 
em IS In program mode. 
Using the various keys, turn their associated 
LEDs on or off, as required. The detailed 
meaning of each key/LED is shown below. 
NOTE: 
/LED is not shown it is not used. 
eet means t 
. . . or . . . 
66) Transfer data into working memory per Par- 
agraph 02.06. 
*If the LED 15 is off in this program, see Program 09; if LED 15 is...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
1) Lock in the SET switch on the HKSU. 
LEDs on or off, as required. The detailed If the LED is already on, depressing the associatec 
meaning of each key/LED is shown below. key will turn it off and vice versa. LEDs may be 
turned off and on until the desired pattern is set, 
02 Door Phone 11 /13C--Busy-out No Busy Signal 
01 Door Phone 11 /13B-Busy-out No Busy Signal 
00 Station 11/13-Door Phone EKT 
5) Depress the m key to place new data in...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
TABLE 7 
PROGRAM 02 
SYSTEM ASSIGNMENTS (OPTIONS) 
SET LED on. .*- 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. - 
Normal functions halt on station 13/17. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial ag on the dial pad. SPKR LED flashes continuously. 
The various LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 8 
PROGRAM 0#2 
ACCOUNT CODE DIGIT LENGTH SELECTION 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. 
.*- 
Normal functions halt on station 13/l 7. 
2) Depress the m key on station 13/l 7. 
SPKR LED steady on. 
3) Dial 1 aa on the dial pad. SPKR LED flashes continuously. 
The various LEDs indicate present data. 
4) Refer to the System Record Sheet. 
Using the various keys, turn their...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
_ JANUARY 1988 
TABLE 9 
PROGRAM 03 
SYSTEM ASSIGNMENTS (OPTIONS) 
1) Lock in the SET switch on the HKSU. SET LED on. 
Station 13/l 7 LED 19 on. 
System is in oroqram mode. .*- 
Normal functions halt on station 13/l 7. 
2) Depress the m key on station 13/l 7. 
SPKR LED steady on. 
3) Dial ag on the dial pad. SPKR LED flashes continuously. 
The various LEDs indicate present data. 
4) Refer to the System Record Sheet. 
An X on the record sheet means the LED...

tWIGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 10 
PROGRAM 04 
CO LINE OUTPULSING SELECTION 
SET LED on. 
1) Lock in the SET switch on the HKSU. 
2) Depress the m key on station 13/l 7. 
3) Dial 1 a on the dial pad. Station 13/l 7 LED 19 on. 
System is in program mode. 
Normal functions hait on station? 3/l 7. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should 
Each CO...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 11 
PROGRAM #4-CO LINE IDENTlFlCATiON 
(LCD EKT Required) 
SET LED on. 
1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. ’ 
Normal functions halt on station 13/17. 
LCD is in program mode. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
LCD: Program No.?. 
3) Dial 39 on the dial pad SPKR LED flashes continuously. 
LCD displays program number. 
4) Refer to the System Record Sheet....