Toshiba Strata E Electronic Key Telephone System Installation And Maintenance Manual

PHUlitlAMMINti PHULtUUHtS 
SECTION 500-036-300 
JANUARY 1988 
TABLE 52 
PROGRAM 4#XX 
STATION FLEXIBLE KEY ASSIGNMENTS 
(IMPORTANT! LCD EKT HIGHLY RECOMMENDED) 
(Do Program 4XX for all stations before this program.) 
. 
SET LED on. 
1) Lock in the SE7 switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. 
Normal functions halt on station*t3/17. 
2) Depress the m key on station 13/l 7. 
SPKR LED steady on. 
3) Dial 4flIaon the dial pad (XX = the number SPKR LED flashes continuously. 
of...

TABLE 53 
PROGRAM 5XX 
STATION CLASS OF SERVICE #I PROGRAMMING PROCEDURES 
SECTION 500-036-300 
_ JANUARY 1988 
1) Lock in the SET switch on the HKSU. 17 LED 19 on. 
Using the appropriate keys, turn their asso- 
ciated LEDs on or off, as required. 
memory. 
6A) Return to Step 2 in order to continue with 
this program 
66) Go to Step 2 in’an”d,her program table 
. . . or . . . 
6C) Transfer data into working memory per Par- 
agraph 02.06. SET LED goes off. 
Station 13/l 7 LED 19 goes off. 
New data is...

PROGRAMMING PROCEOURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 54 
PROGRAM 5#XX 
STATION CLASS OF SERVICE #2 
1 SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. 
the associated 
key/LED is not shown, it is not used. 
6B) Go to Step 2 i,‘&“dtt&; program table 
. . . or . . 
6C) Transfer data into working memory per Par- 
agraph 02.06. SET LED goes off. 
Station 13/l 7 LED 19 goes off. 
NOTES: 
1. For multiple station programming, refer to Paragraph...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
_ JANUARY 1988 
TABLE 55 
PROGRAM 6XX 
STATION TOLL RESTRICTION/LCR CLASSIFICATION 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED ‘I9 on. 
System is in program mode. 
.a- 
Normal functions halt on station 13/l 7. 
)P 
2 De ress the w 
3) Dial flgBon the dial pad (XX = the number of SPKR LED flashes continuously. 
the station(s) to be programmed). An LED indicates present data. 
4) Refer to the System Record Sheet. An X on the record...

rtiUblwMMINLi PtiUbtUUntS 
SECTION 500-036-300 
JANUARY 1988 
TABLE 56 
PROGRAM 6#XX 
STATION-TO-STATION HUNTING 
1) Lock in the SET switch on the HKSU. 
ines the station hunt desti- 
nation. Dial th -digit number using the dial 
Binary Numbers: 
X = LED on 
All LEDs off = no data 
6A) Return to Step 2 in order to continue with 
this program 
. . or . . . 
6B) Go to Step 2 in another program table 
. . . or . . 
6C) Transfer data into working memory per Par- 
agraph 02.06. SET LED goes off. 
Station 13/l...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 57 
PROGRAM 7XX 
STATION OUTGOING CALL RESTRICTION 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
.- 
Normal functions halt on station 13/l 7. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial ilaon the dial pad (XX = the number of SPKR LED flashes continuously. 
the station(s) to be programmed). CO LEDs indicate present data. 
4) Refer to the System Record...

~ ..__.U . . . . m ..,.I” . ..-“LY”IsLsJ 
SECTION 500-036-300 
JANUARY 1988 
TABLE 58 
PROGRAM 81XX - 89XX 
CO RINGING ASSIGNMENTS (DAY/DAY2/NIGHT) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
Normal functions halt on station--l 3/l 7. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial Bu pg on the dial pad (Y = 1 - 9”; XX = SPKR LED flashes continuously. 
the number of station(s) to be programmed). CO LEDs indicate present...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 59 
PROGRAM 9#XX 
DOOR PHONE ASSIGNMENTS 
SET LED on. 
‘1) Lock in the 
SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
Normal functions halt on station’i3/17. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial alIaon the dial pad (XX = the number SPKR LED flashes continuously. 
of the station(s) to be programmed). CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on...

_ _.--m., ..w..-...w- . ..-----..-” 
SECTION 500-036-300 
JANUARY 1988 
TABLE 60 
PROGRAM *X# 
FLEXIBLE ACCESS CODE NUMBERING 
1) Lock in the SET switch on the HKSU. 
Binary Numbers: 
X = LED on 
All LEDs off = no data 
6B) Transfer data into working memory per Par- 
agraph 02.06. 
-86-  

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
_ JANUARY 1988 
TABLE 61 
PROGRAM *XX 
FLEXIBLE INTERCOM NUMBERING 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. .*- 
Normal functions halt on station 13/l 7. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial ~~~on the dial pad (XX= the system in- 
SPKR LED and LED 10 flash continuously. 
tercom number). 
4) Refer to the System Record Sheet. 
Enter the 4-digit Toll Restriction...