Toshiba Strata E Electronic Key Telephone System Installation And Maintenance Manual

FWJliKAMMlNti PHUL;tUUHtS 
SECTION 500-036-300 
JANUARY 1988 
TABLE 12 
PROGRAM 05 
AUTOMATIC RECALL FROM HOLD TIMING 
(This program is used only if LEDs 10, 11 and 12 are ALL off in Program 5#XX.) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
Normal functions halt on station 13717. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial la on the dial pad. SPKR LED flashes continuously. 
One LED indicates present data. 
4) Refer...

TABLE 13 PROGRAMMING PROCEDURES 
SECTION 500-036-300 
_ JANUARY 1988 
PROGRAM 0#5 
CAMP-ON TIMEOUT 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. .*- 
Normal functions halt on station 13/l 7. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial 1 flu on the dial pad. SPKR LED flashes continuously. 
One LED indicates present data. 
4) Refer to the System Record Sheet. 
An X on the record sheet means the LED should 
Using the...

, ImvumI~IvIIIII~~~ r mbruunc4 
SECTION 500-036-300 
JANUARY 1988 
TABLE 14 
-_ 
PROGRAM 06 
AUTOMATIC RELEASE ON HOLD ENABLE 
, . 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
2) Depress the m key on station 13/l 7. 
3) Dial 88 on the dial pad. Normal functions halt on statiorYl3/17. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. 
Using the various keys, turn their...

TABLE 15 PROGRAMMING PROCEDURES 
SECTION 500-036-300 
_ JANUARY 1988 
PROGRAM 0#6 
TRUNK-to-TRUNK CONNECTION ENABLE 
SET LED on. 
1) Lock in the SET switch on the HKSU. 
2) Depress the w key on station 13/l 7. 
3) Dial 111 on the dial pad. Station 13/17 LED 19 on. 
System is in program mode. .*- 
Normal functions halt on station 13/l 7. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. 
An X on the record sheet means the LED should...

rnuunbwlrviIIu4.a rfwawtsts 
SECTION 500-036-300 
JANUARY 1988 
TABLE 16 
PROGRAM 07 
AUTOMATIC RELEASE ON HOLD TIMING 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
2) Depress the m key on station 13/l 7. 
3) Dial ii on the dial pad. Normal functions halt on station ‘B/17. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
TABLE 17 
PROGRAM 0#7 
AUTOMATIC RELEASE ON HOLD TIMING 
SET LED on. 
1) Lock in the SET switch on the HKSU. 
2) Depress the m key on station 13/17. 
3) Dial 81a on the dial pad. Station 13/l 7 LED 19 on. 
System is in program mode. .*- 
Normal functions halt on station 13/17. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should...

PlWWlAMMING PRCJGEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 18 
PROGRAM 08 
CO LINE CALL PICKUP SELECTION 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
2) Depress the m key on station 13/l 7. 
3) Dial 41 on the dial pad. Normal functions halt on station*‘? 3/l 7. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the LED should 
Using...

TABLE 19 PROGRAMMING PROCEDURES 
SECTION 500-036-300 s 
- JANUARY 1988 
PROGRAM 0#8 
NIGHT RINGING OVER EXTERNAL PAGE 
(STRATA Vie only) 
SET LED on. 
1) Lock in the SET switch on the HKSU. 
2) Depress the m key on station 17. 
3) Dial BflB on the dial pad. Station 17 LED 19 on. 
System is in program mode. .*- 
Normal functions halt on station 17. 
SPKR LED steady on. 
SPKR LED flashes continuously. 
CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An X on the record sheet means the...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 20 
PROGRAM 09 
SINGLE CO LINE (DIAL 9) GROUP SELECTION 
I . 
1 SET LED on. .* 
1) Lock in the SET switch on the HKSU. Station 13/l 7 LED 19 on. 
System is in program mode. 
2) Depress the m key on station 13/l 7. Normal functions halt on station 13/l? 
SPKR LED steady on. 
3) Dial 31 on the dial pad. 
4) Refer to the System Record Sheet. 
Using the appropriate keys, turn their asso- 
ciated LEDs on or off, as required. Each CO 
key/LED...

TABLE 21 PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
PROGRAM 09X 
CO LINE GROUPS (DIAL 91 - 98) ASSIGNMENTS 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. 8‘ 
Normal functions halt on station 13/l 7. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial mua on the dial pad. (X = 1 - 8 depending SPKR LED flashes continuously. 
upon the group being defined.) Dial aug for CO LEDs indicate present data. 
“Dial 91”...