Toshiba Strata E Electronic Key Telephone System Installation And Maintenance Manual

PHUliRAMMlNG PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 42 
PROGRAM 1 #XY 
LEAST COST ROUTING AREA CODE TABLE 
(LCD TELEPHONE REQUIRED-STRATA Vie only) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 17 LED 19 on. 
System is in program mode. 
Normal functions halt on station ?7. 
LCD: PROGRAM MODE 
2) Depress the m key on station 17. SPKR LED steady on. 
LCD: PROGRAM NO.? 
3) Dial flpfl1 (Allow), DpaB (Delete) or pgaa SPKR LED flashes continuously. 
(Display) as required. (X =...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 43 
PROGRAM 1 #X8Y 
LEAST COST ROUTE DEFINITION 
(LCD EKT REQUIRED-STRATA Vie only) 
1) Lock in the SET switch on the HKSU. 
2) Depress the m key on station 17. 
3) Dial BlIag on the dial pad. X = Route Table 
1 - 8: Y = Route Definition 1 - 4. 
4) Refer to the System Record Sheet. 
Using the dial pad, enter the Route Definition 
number and Modified Digits Table number. 
5) Depress the irr;m key to place new data in 
memory. 
6A) Go to Step...

IVWUHAMMINti tWJlitUlJH~~ 
SECTION 500-036-300 
JANUARY 1988 
TABLE 44 
PROGRAM l#X50 - 53 
START TIME A SCHEDULE 
(LCD EKT REQUIRED-STRATA Vie only) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 17 LED 19 on. 
System is in program mode. 
Normal functions halt on station 147. 
LCD: PROGRAM MODE 
2) Depress the m key on station 17. SPKR LED steady on. 
LCD: PROGRAM NO.? 
3) Dial flIEfIa - 11 on the dial pad. X = Route SPKR LED flashes continuously. 
Table 1 - 8. LCD: (displays dialed...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
TABLE 45 
PROGRAM l#X60 - 63 
START TIME B SCHEDULE 
(LCD EKT REQUIRED-STRATA Vie only) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 17 LED 19 on. 
System is in program mode. .*- 
Normal functions halt on station 17. 
LCD: PROGRAM MODE 
2) Depress the m key on station 17. SPKR LED steady on. 
LCD: PROGRAM NO.? 
3) Dial ~I~~~ - uaon the dial pad. X = Route SPKR LED flashes continuously. 
Table 1 - 8. LCD: (displays dialed number)...

rnuunnMMllYLl rnubeuunm 
SECTION 500-036-300 
JANUARY 1988 
TABLE 46 
PROGRAM l#X70 - 73 
START TIME C SCHEDULE 
(LCD EKT REQUIRED-STRATA Vie only) 
SET LED on. 
1) Lock in the SET switch on the HKSU. 
2) Depress the m key on station 17. 
3) Dial p~~~~ - al on the dial pad. X = Route 
Table 1 - 8. 
4) Refer to the System Record Sheet. 
Enter the required data for 70- 73 via the dial 
pad. 
5) Depress the cnr;l key to place new data in 
memory. 
6A) Return to Step 2 in order to continue with 
this program...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
TABLE 47 
PROGRAM 1#9XY 
MODIFIED DIGITS TABLE 
(LCD EKT REQUIRED-STRATA Vie only) 
SET LED on. 
Station 17 LED 19 on. 
1) Lock in the SET switch on the HKSU. System is in program mode. .*- 
I Normal functions halt on station 17. 
1 LCD: PROGRAM MODE 
2) Depress the m key on station 17. SPKR LED steady on. 
LCD: PROGRAM NO.? 
3) Dial ~l~~~on the dial pad. X = Modified Dig- SPKR LED flashes continuously. 
its Table 1 - 6, Y = (0) delete, (1)...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
JANUARY 1988 
TABLE 48 
PROGRAM 2#XY 
LEAST COST ROUTING AREA/OFFICE CODE EXCEPTION TABLE 
(LCD EKT REQUIRED-STRATA Vie only) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 17 LED 19 on. 
Normal functions halt on station 17. 
LCD: PROGRAM MODE 
.- 
2) Depress the m key on station 17. SPKR LED steady on. 
LCD: PROGRAM NO.? 
3) Dial ~~~~ I on the dial pad. X = Area/Office SPKR LED & LED 10 flash continuously. 
Code Table 1 - 8. 
4) Refer to System...

TABLE 49 PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
PROGRAM 3XX 
STATION CO LINE ACCESS 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. .+ 
Normal functions halt on station 13/j 7. 
2) Depress the m key on station 13/l 7. SPKR LED steady on. 
3) Dial BflBon the dial pad (XX = the number of 
SPKR LED flashes continuously. 
the station(s) to be programmed). The CO LEDs indicate present data. 
4) Refer to the System Record Sheet. An...

rnuunAMMlNlI rnubcuunta 
SECTION 500-036-300 
JANUARY 1988 
TABLE 50 
PROGRAM 3#XX 
HOXB, HMDB and HIOB ENABLE 
1) Lock in the SET switch on the HKSU. 
Using the appropriate keys, turn their asso- 
ciated LEDs on or off, as required. The de- If the LED is already on, depressing the associated 
key will turn it off and vice versa. LEDs may be 
66) Go to Step 2 in’in$h& program table 
. . . or . . . 
6C) Transfer data into working memory per Par- 
agraph 02.06. 
NOTE: 
For multiple station programming,...

PROGRAMMING PROCEDURES 
SECTION 500-036-300 
- JANUARY 1988 
TABLE 51 
PROGRAM 4XX 
STATION TYPE ASSIGNMENT 
(This program must be completed before Program 4#XX.) 
SET LED on. 
1) Lock in the SET switch on the HKSU. Station 13/17 LED 19 on. 
System is in program mode. .*- 
Normal functions halt on station 13/17. 
2) Depress the m key on station 13/l 7. 
SPKR LED steady on. 
3) Dial PPaon the dial pad (XX = the number of SPKR LED flashes continuously. 
the station(s) to be programmed). The CO LEDs...