Toshiba Strata Dk24, Dk56, Dk96 Instruction Manual

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS 
SECTION 200-096-302 
FEBRUARY 1991 
PROGRAM 19 
BACKGROUND MUSIC SLOT IDENTIFICATION (RELEASE 3) 
_ 
SELECT =’ 1 SLOf(O1 
- 14) 
DK96: 01 - 14 
DK56: 01 - 08 
DK24: 01 - 06 
Slot number of PEKU or PEW 
connected to background 
music (5GM) source 
NOTES: 
1. For more information, see the instructions preceding the record sheets. 
2. If PEKU, the BGM source must be wired to Circuit 3. 
3. If PEW, the BGM source must be wired to Circuit 8. 
4. LED 09...

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS 
SECTION 200-096-302 
FEBRUARY1991 
PROGRAM20 
PDKUDATAPORTCONFlGURATlON(RELEASE3) 
Select = PDKU Port Number that is connected to 
PDIU-DS or to DKT with PDIU-DI. Keys/LEDs 1 - 5 defines data port type; 
KeWLEDs 17 - 20 assigns data port to security group. 
PDKU Port Number n n n-n 
PDKU Port Number n n 
1 
7 
I 
- 
06 
I I 
PDKU Port Number 1 1  11 
KEYI 
LED X LED ON LED OFF 
Data Security Not 
Group 4 Included 
Data Security Not 
Group 2 Included 
Data...

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS 
SECTION 200-096-302 
FEBRUARY1991 
PROGRAM21 
MODEMPOOLPORTASSlGNMENTS(RELEASE3) 
_1  PDKU/PDIlJ-DS, Port Number 
TSTlJlModem Port Number 
PDKWPDIU-DS, Port Number I r PSTWModem Port Number 
Assignment 1 
I-m 
Assignment 2 
I-D 
Assignment 3 
I-D 
Assignment 4 
I-En 
Assignment 5 
I-LIEI 
Assignment 6 
I-ELII 
Assignment 7 
I-D 
Assignment 8 
I-D 
Assignment 9 
I-D 
Assignment ICI II -(I 
NOTES: 
1. For more information, see the instructions preceding the...

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS 
SECTION 200-096-302 
FEBRUARY 1991 
PROGRAM 22 
DATA INTERFACE UNIT (DIU) STATION HUNTING (DATA CALLS ONLY; RELEASE 3) 
SELECT = Port Number (00-95) 
Enter the PDKU/DIU port 
number of the Hunt From 
station. See Note 3 for 
entering a range of ports. HUNT TO = (00-95) 
Enter the Hunt To 
PDKlUDIU port 
number. See Note 4. 
Port 
E 
Hunt To 
32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 
64 65 66 67 68...

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS 
SECTION 200-096-302 
FEBRUARY1991 
PROGRAM28 
DSSCONSOLE/ATTENDANTELECTRONlCTELEPHONEASSlGNMENTSAND _ 
DlGlTALDSSCONSOLE/ATTENDANTDlGlTALTELEPHONEASSlGNMENTS 
p-j-p--p-pqp-j-p-j~rpT-p-j-~ 
7  SELECT= (l-4) &ATT (1 4)  = - 
Enter the DSS 
Enter the attendant electronic or digital 
console number. telephone number. See Notes 4 and 5. 
See Note 3. 
DSS PEKU/ DSS/DDSS 
DDSS PDKU PCBs Console 
(Lowest Slot to Highest) Number Attendant Electronic/ 
Digital...

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECOROS 
SECTION 200-096-302 
FEBRUARY1991 
PROGRAM29-1 
DIGITALDSSANDDSSCONSOLEKEYASSIGNMENTS 
CONSOLE1 
SELECT = 1 
DSS Number 1-4: 
Each system can have up to 4 No. 01 - No. 20 
Press the LED/key that dial, CO line access, or DSS 
consoles. Enter the console to which 
is in the same position station access code to the 
keys are being assigned (DSS console 1). 
as the console key being key chosen. See code 
DSS Key Group 1-3: 
assigned. The LED table below for...

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS 
SECTION 200-096-302 
FEBRUARY1991 
PROGRAM29-2 
DIGITALDSSANDDSSCONSOLEKEYASSIGNMENTS 
CONSOLE2 
SELECT = 2 
DSS Number 1-4: 
Each system can have up to 4 No. 01 - No. 20 
Press the LED/key that dia!, CO line access, or DSS 
consoles. Enter the console to which 
is in the same position station access code to the 
keys are being assigned (DSS console 2). 
as the conso’e key being key chosen. See code 
DSS Key Group 1-3: assigned. The LED table below for...

I 
PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS 
SECTION 200-096-302 
FEBRUARY1991 
PROGRAM29-3 
DIGITALDSSANDDSSCONSOLEKEYASSIGNMENTS 
CONSOLE3 
SELECT = 2 
DSS Number l-4: 
Each system can have up to 4 No. 01 - No. 20 
dial, CO line access, or DSS 
consoles. Enter the console to which Press the LED/key that 
is in the same position station access code to the 
keys are being assigned (DSS console 2). 
as the console key being key chosen. See code 
DSS Key Group l-3: 
assigned. The LED table below...

PROGRAMMINGPROCEDURES-INSTRUCTIONS/SYSTEMRECOROS 
SECTION 200-096-302 
FEBRUARY1991 
PROGRAM29-4 
DIGITALOSSANDDSSCONSOLEKEYASSIGNMENTS 
. 
SELECT = 2 
DSS Number l-4: 
Each system can have up to 4 No. 01 - No. 20 
consoles. Enter the console to which Press the LED/key that 
station access code to the 
keys are being assigned (DSS console 2). is in the same position 
as the console key being key chosen. See code 
DSS Key Group l-3: 
assigned. The LED table below for the keys 
Each console has three...

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS 
SECTION 200-096-302 
FEBRUARY 1991 
PROGRAM 29 
INITIALIZED DSS AND DIGITAL DSS CONSOLE KEY ASSIGNMENTS 
#09 #19 
#08 #18 
#07 #17 
#06 #16 PCTU (1,2, or 3) 
#29 #39 
#28 #38 
#27 #37 
#26 #36 #49 NTl(91) 
#48 AC (89) 
#47 #57 
#46 #56 
#05 #15 #25 #35 
#45 #55 
#04 #14 #24 #34 #44 
#54 
#03 #13 #23 #33 
#43 #53 
#02 #12 #22 #32 #42 
#52 
#Ol #ll #21 
#31 #41 #51 
#OO #IO #20 
#30 #40 #50 
. 
. 
:, Speed Dial Keys Vi 
. 
. . 
. 
. 
2-70