Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual

DK424 Configuration
Worksheets
Strata DK I&M     5/994-19
DK424 Configuration
Worksheets
The worksheets help you configure the system. Designed to make the system configuration as 
orderly as possible, they also provide room to record the hardware - cabinets, PCBs, stations, and 
options - that comprise the system.
Copy the worksheets as required, then fill them out in the order they are given.
©Worksheet 1 – System PCB Slot Requirements
©Worksheet 2 – System Cabinet Assignment Guide
©Worksheet 3 –...

DK424 Configuration
Worksheet 1 – System PCB (Slot) Requirements
4-20Strata DK I&M    5/99
Worksheet 1 – System PCB (Slot) Requirements
Digital Ports Required
Electronic Ports Required
Customer
Location
Digital Telephones (DKTs)
2010-H
2010-SD
2020-S
2020-SD
2004-CT
2001-SLT
WRLS-HS
1020-H
1020-SD
Total Digital Telephones (DKTs) 1 port per Digital Telephone (1 X Total)
Total DDSS Consoles 1 port per Digital DDSS Console (1 X Total)
Total PDIU-DS 1 port per Digital PDIU-DS (1 X Total)
Total Digital Door...

DK424 Configuration
Worksheet 1 – System PCB (Slot) Requirements
Strata DK I&M     5/994-21
DK424 Configuration
Standard Ports Required
Standard Telephones
On Premise
Off Premise
Total Standard Telephones 1 port per Standard Telephone (1 X Total)
Total Analog Wireless Handsets 1 port per Analog Wireless Handset (1 X Total)
Total Voice Mail Ports 1 port per Voice Mail Port (1 X Total)
Total Fax or Modem Devices 1 port per fax/modem device (1 X Total)
Total ACD/Auto Attendant Digital
Announcement Devices 1...

DK424 Configuration
Worksheet 1 – System PCB (Slot) Requirements
4-22Strata DK I&M    5/99
Station PCBs/Slots Required
1. Total digital ports divided by 8 (round up) =  Total PDKU2 PCB slots required
Notes
lPDKU2 provides eight digital telephone ports (circuits). Circuit 
5 (when associated with ports 004, 012, 020, and 028) can only 
interface with a DDCB. Circuit 8 can only interface with a DDSS 
console (see Page 4-17).
lThe PDKU1 can also be used. The PDKU1 can only support 
Data Interface Units...

DK424 Configuration
Worksheet 1 – System PCB (Slot) Requirements
Strata DK I&M     5/994-23
DK424 Configuration
CO Line PCBs/Slots Required
1. Determine analog loop start line PCB slot requirements.
Total loop start lines (with/ without Caller ID) divided 
by 8 (round up) = 
Total RCOU/RCOS PCBs (slots) required
Total loop start lines (with/without Caller ID) divided 
by 4 (round up) =
Total RGLU2/RCOU/PCOU PCBs (slots) 
required(PCOU existing)
Total analog loop start line PCB slots required
Notes
lRGLU2...

DK424 Configuration
Worksheet 1 – System PCB (Slot) Requirements
4-24Strata DK I&M    5/99
Total analog Tie lines (with or without ANI/DNIS) 
divided by 4 = Total REMU/PEMU PCB slots required
Notes
lREMU provides four E&M Tie trunks (Type I or II signaling, 
Wink or Immediate Start, 2- or 4-wire transmission).
lThe PEMU1 can also be used. The PEMU only provides Type 
1 signaling, 2- or 4-wire transmission and Immediate Start.
lSee Table 4-7 for REMU/PEMU maximum quantities. Prior to 
Release 4, each REMU...

DK424 Configuration
Worksheet 1 – System PCB (Slot) Requirements
Strata DK I&M     5/994-25
DK424 Configuration
Notes
lWhen installing 16 or 24 channel RDTU PCBs into a slot, the 
next slot or two slots may not be usable for other PCBs (Tables 
4-4 and 4-5 and Worksheet 2.)
lRDTU provides either 8, 16, or 24 channels (lines), depending 
on programming. Each channel can be set for either DID, 
ground start CO, loop start CO, or Tie line operation. (Each 
RDTU Tie line or DID line reduces the system line...

DK424 Configuration
Worksheet 1 – System PCB (Slot) Requirements
4-26Strata DK I&M    5/99
Attendant Console Slots Required
PIOU/PIOUS/RSIU/RSSU Option Slots Required
PEPU Page Option PCB Required
äEnter one slot for each attendant console required (1~4 
consoles maximum).Total RATU PCB slots required
äEnter number of option PCBs required.
Total needed for MIS for ACD (required new)
Total needed for remote/local maintenance with
DKAdmin/DKBackup PC
Total needed for SMDI
Total needed for SMDR (existing...

DK424 Configuration
Worksheet 1 – System PCB (Slot) Requirements
Strata DK I&M     5/994-27
DK424 Configuration
System Slots Required
Cabinets Required
Important!To determine the type of RCTU PCB required, use Table 4-7. The total Universal 
slots and features required determine the RCTU PCB needed. ä
List the number of slots for each of the following:
Total number of Station PCB slots required
(see Page 4-22)
Total number of CO Line PCB slots required
(see Page 4-25)
Total number of attendant console...

DK424 Configuration
Worksheet 2 – System Cabinet Assignment Guide
4-28Strata DK I&M    5/99
Worksheet 2 – System Cabinet Assignment Guide
DK424 and DK280 Base and Expansion Cabinets are interchangeable. The only system 
considerations are:
©OCA/RPCI configuration requirements
©Channel (8, 16, and 24) RDTU (T1/DS-1 interface) slot configuration requirements
©Number of system slots required. (See “System Slots Required” on Page 4-27.)
See Tables 4-7 and 4-8 for OCA/RPCI and T1/DS-1 configuration...