Home
>
Toshiba
>
Communications System
>
Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual
Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual
Here you can view all the pages of manual Toshiba Strata Dk14, Dk40i, Dk424 Installation And Maintenance Manual. The Toshiba manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 161
DK424 Installation Wall Mounting the Base Cabinet Strata DK I&M 5/995-11 DK424 Installation Power Supply (RPSU280 or RPSU424) Removal 1. Remove the front and right side covers (Figures 5-2 and 5-3) from the cabinet where the power supply will be removed. Remove the right side covers of other cabinets as necessary to disconnect wiring. 2. Turn the power supply OFF, and disconnect the AC power cord, all ground wiring and reserve power cabling that is connected to the power supply. 3. Disconnect the DC...
Page 162
DK424 Installation Wall Mounting the Base Cabinet 5-12Strata DK I&M 5/99 11. Drill holes at the bottom two mounting holes of the back cover, and secure #12 X 1.25 inch wood screws into the two holes. 12. If installing just a Base Cabinet: Position the Base Cabinet on the back cover cabinet hangers, slide the cabinet to the right to the proper mounting position, and secure the cabinet to the back cover with two screws on the right side of the cabinet. If installing Expansion Cabinets, skip to...
Page 163
DK424 Installation Wall Mounting the Base Cabinet Strata DK I&M 5/995-13 DK424 Installation Back Cover Front Up Wall16 in. Dealer Supplied #12 X 1.25 Wood Screws (4 Screws per Cabinet) 1455 Figure 5-4 DK424 Cabinet Mounting Surface Diagram (Directly on the Wall)
Page 164
DK424 Installation Wall Mounting the Base Cabinet 5-14Strata DK I&M 5/99 Front Up Back Cover 6.5 ft. (for seven cabinets ) 6 inches between bottom cabinet and floor Plaster Board Wall Dealer Supplied #12 X 1.25 Wood Screws (4 Screws Per Cabinet) #12 X 1.25 Wood Screws (As many as necessary to secure plywood backboard) 3/4 Plywood Backboard Floor1456 Locating Parts Figure 5-5 DK424 Cabinet Mounting Surface Diagram (with Plywood Backboard)
Page 165
DK424 Installation Wall Mounting the Base Cabinet Strata DK I&M 5/995-15 DK424 Installation RightFront Back Cover Top Cover (Base Cabinet Only) Right Side Cover Remove four screws to remove back cover Loosen two screws to remove the side cover (right and left covers) Right Front Right Side Cover Top Cover (Base Cabinet Only) Front Cover Remove this screw to remove the front cover Loosen three screws to remove front coverLoosen two screws to remove the side covers (right and left side covers) Loosen four...
Page 166
DK424 Installation Wall Mounting the Base Cabinet 5-16Strata DK I&M 5/99 16 IN. 8.1 IN. Back Cover Trace Upper ArchMarking Hole1459 Figure 5-7 DK424 Back Cover Mounting Holes 1460 Important!After mounting cabinet to back cover use two screws to fasten cabinet to back cover. Hanger Back Cover Mounting Strip Hanger Hole Back Cover Hang cabinet on back cover then slide to right. Figure 5-8 DK424 Mounting Cabinet on Back Cover
Page 167
DK424 Installation Wall Mounting the Base Cabinet Strata DK I&M 5/995-17 DK424 Installation To AC Outlet Right Side Bonding Connection Plates (Required for all wall mounted expansion cabinets on both right and left sides) AC Power Cables Front RPSB1 or RPSB2 Power Strip 1462 Figure 5-9 Right Side View of Cabinet Interior NoteSee “Outlet Strip (RPSB1 and RPSB2) Installation” on Page 5-34 for RPSB1 and RPSB2 cabinet locations.
Page 168
DK424 Installation Wall Mounting the Base Cabinet 5-18Strata DK I&M 5/99 To MDF Left Side Bonding Connection Plate (required for all wall mount expansion cabinets) PCB Cable Front Data Cables CAB 2 CAB 3 CAB 4 CAB 5 CAB 6 CAB 7 Important !Data cable shield doors must be closed and secured at all times during the system operation. Cable Guard Screw Cable Guard Data Cable Door (shown open) Base Cabinet Expansion Cabinet Expansion Cabinet Cab 2 Cable 1461 Figure 5-10 Left Side View of Cabinet Interior
Page 169
DK424 Installation Wall Mounting the Base Cabinet Strata DK I&M 5/995-19 DK424 Installation 1848 1848 R11 RCTU S11 S12 S13 S14 S15 S16 CABINET NO. 2345 67 S_ 1S_ 2S_ 3S_ 4 S_ 5S_ 6S_ 7S_ 8 Printed Circuit Board Cables Figure 5-11 Front View of DK424 Cabinet Interior
Page 170
DK424 Installation Wall Mounting the Base Cabinet 5-20Strata DK I&M 5/99 Knock Out Plastic To MDFTop To MDF To MDF 25-Pair Amphenol Cables 25-Pair Amphenol Cables 25-Pair Amphenol Cables1464 B. Cables Run Out of Side of Cabinet(s) C. Cables Run Out of Bottom of Cabinet(s)A. Cables Run Out of Top of Cabinet(s) Figure 5-12 DK424 Cabinet Cable Routing