Toshiba Estudio 230 Manual
Here you can view all the pages of manual Toshiba Estudio 230 Manual. The Toshiba manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 25
2
[FAX] button: OFF ([FAX] LED: OFF)
Digital key Button Items to check Contents
Highlighted display
e.g. Normal dis-
play
e.g.
[1] A -
- -
B LCF connection Not connected Connected
C Bypass unit connection Not connected Connected
D Bypass paper sensor No paper Paper present
E ADU connection Not connected Connected
F ADU opening/closing switch ADU opened ADU closed
G ADU exit sensor Paper present No...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-60.png "Page 61
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 25
2
[FAX] button: OFF ([FAX] LED: OFF)
Digital key Button Items to check Contents
Highlighted display
e.g. Normal dis-
play
e.g.
[1] A -
- -
B LCF connection Not connected Connected
C Bypass unit connection Not connected Connected
D Bypass paper sensor No paper Paper present
E ADU connection Not connected Connected
F ADU opening/closing switch ADU opened ADU closed
G ADU exit sensor Paper present No...")
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 25 2 [FAX] button: OFF ([FAX] LED: OFF) Digital key Button Items to check Contents Highlighted display e.g. Normal dis- play e.g. [1] A - - - B LCF connection Not connected Connected C Bypass unit connection Not connected Connected D Bypass paper sensor No paper Paper present E ADU connection Not connected Connected F ADU opening/closing switch ADU opened ADU closed G ADU exit sensor Paper present No...
Page 62
![Page 62
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 26
[5]
A LCF end fence home position sensor Fence home
positionOther than
home position
B LCF end fence stop position sensor Fence stop positionOther than
stop position
C LCF standby side empty sensor No paper Paper present
D LCF side cover opening/closing switch Cover closed C over opened
E LCF motor rotation status (Motor is rotating at ou tput mode
(03)) Abnormal rota-
tionNormal rota-
tion
F LCF...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-61.png "Page 62
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 26
[5]
A LCF end fence home position sensor Fence home
positionOther than
home position
B LCF end fence stop position sensor Fence stop positionOther than
stop position
C LCF standby side empty sensor No paper Paper present
D LCF side cover opening/closing switch Cover closed C over opened
E LCF motor rotation status (Motor is rotating at ou tput mode
(03)) Abnormal rota-
tionNormal rota-
tion
F LCF...")
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 26 [5] A LCF end fence home position sensor Fence home positionOther than home position B LCF end fence stop position sensor Fence stop positionOther than stop position C LCF standby side empty sensor No paper Paper present D LCF side cover opening/closing switch Cover closed C over opened E LCF motor rotation status (Motor is rotating at ou tput mode (03)) Abnormal rota- tionNormal rota- tion F LCF...
Page 63
![Page 63
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 27
2
Table 1. Relation between the status of the bypass paper width sensor and paper size (width).
[0]A -
- -
B - - -
C - - -
D Lower drawer detection switch Drawer not installedDrawer
present
E Lower drawer paper stock sensor Paper almost emptyPaper present
F - - -
G - - -
H - - -
Bypass paper-width sensor Paper-width size
2 1 0
1 1 1 A3/A4
1 1 0 B5-R
1 0 1 A5-R
1 0 0 A3/A4
0 1 1 Card size
0 1 0...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-62.png "Page 63
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 27
2
Table 1. Relation between the status of the bypass paper width sensor and paper size (width).
[0]A -
- -
B - - -
C - - -
D Lower drawer detection switch Drawer not installedDrawer
present
E Lower drawer paper stock sensor Paper almost emptyPaper present
F - - -
G - - -
H - - -
Bypass paper-width sensor Paper-width size
2 1 0
1 1 1 A3/A4
1 1 0 B5-R
1 0 1 A5-R
1 0 0 A3/A4
0 1 1 Card size
0 1 0...")
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 27 2 Table 1. Relation between the status of the bypass paper width sensor and paper size (width). [0]A - - - B - - - C - - - D Lower drawer detection switch Drawer not installedDrawer present E Lower drawer paper stock sensor Paper almost emptyPaper present F - - - G - - - H - - - Bypass paper-width sensor Paper-width size 2 1 0 1 1 1 A3/A4 1 1 0 B5-R 1 0 1 A5-R 1 0 0 A3/A4 0 1 1 Card size 0 1 0...
Page 64
![Page 64
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 28
[FAX] button: ON ([FAX] LED: ON)
Digital key Button Items to check Contents
Highlighted display
e.g. Normal dis-
play
e.g.
[1] A -
- -
B - - -
C 24 V power supply Power ON Power OFF
D IPC board connection Not connected Connected
E - - -
F Polygonal motor rotation status (Motor is rotating at Output
Mode (03)) Abnormal rota-
tionNormal rota-
tion
G Auger lock switch Lock Unlock
H Toner cartridge...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-63.png "Page 64
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 28
[FAX] button: ON ([FAX] LED: ON)
Digital key Button Items to check Contents
Highlighted display
e.g. Normal dis-
play
e.g.
[1] A -
- -
B - - -
C 24 V power supply Power ON Power OFF
D IPC board connection Not connected Connected
E - - -
F Polygonal motor rotation status (Motor is rotating at Output
Mode (03)) Abnormal rota-
tionNormal rota-
tion
G Auger lock switch Lock Unlock
H Toner cartridge...")
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 28 [FAX] button: ON ([FAX] LED: ON) Digital key Button Items to check Contents Highlighted display e.g. Normal dis- play e.g. [1] A - - - B - - - C 24 V power supply Power ON Power OFF D IPC board connection Not connected Connected E - - - F Polygonal motor rotation status (Motor is rotating at Output Mode (03)) Abnormal rota- tionNormal rota- tion G Auger lock switch Lock Unlock H Toner cartridge...
Page 65
![Page 65
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 29
2
[5] A -
- -
B - - -
C - - -
D - - -
E - - -
F RADF connection RADF con-
nected Not connected
G Platen sensor Platen cover
opened Platen cover
closed
H Carriage home position sensor Carriage at home positionOther than
home position
[6] A -
- -
B - - -
C - - -
D APS sensor (APS-R) No original Original
present
E APS sensor (APS-C) No original Original
present
F APS sensor (APS-3) No original...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-64.png "Page 65
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 29
2
[5] A -
- -
B - - -
C - - -
D - - -
E - - -
F RADF connection RADF con-
nected Not connected
G Platen sensor Platen cover
opened Platen cover
closed
H Carriage home position sensor Carriage at home positionOther than
home position
[6] A -
- -
B - - -
C - - -
D APS sensor (APS-R) No original Original
present
E APS sensor (APS-C) No original Original
present
F APS sensor (APS-3) No original...")
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 29 2 [5] A - - - B - - - C - - - D - - - E - - - F RADF connection RADF con- nected Not connected G Platen sensor Platen cover opened Platen cover closed H Carriage home position sensor Carriage at home positionOther than home position [6] A - - - B - - - C - - - D APS sensor (APS-R) No original Original present E APS sensor (APS-C) No original Original present F APS sensor (APS-3) No original...
Page 66
![Page 66
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 30
Table 2. Connecting status of additional options at inner area of the equipment
[9]A Bridge unit/Job Separator/Offset Tray connection d
etection-
3 Refer to table 2
B Bridge unit/Job Separator/Offset Tray connection d etection-
2 Refer to table 2
C Bridge unit/Job Separator/Offset Tray connection d etection-
1 Refer to table 2
D - - -
E - - -
F - - -
G - - -
H - - -
[0] A Dongle (for Printer/Scanner kit...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-65.png "Page 66
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 30
Table 2. Connecting status of additional options at inner area of the equipment
[9]A Bridge unit/Job Separator/Offset Tray connection d
etection-
3 Refer to table 2
B Bridge unit/Job Separator/Offset Tray connection d etection-
2 Refer to table 2
C Bridge unit/Job Separator/Offset Tray connection d etection-
1 Refer to table 2
D - - -
E - - -
F - - -
G - - -
H - - -
[0] A Dongle (for Printer/Scanner kit...")
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 30 Table 2. Connecting status of additional options at inner area of the equipment [9]A Bridge unit/Job Separator/Offset Tray connection d etection- 3 Refer to table 2 B Bridge unit/Job Separator/Offset Tray connection d etection- 2 Refer to table 2 C Bridge unit/Job Separator/Offset Tray connection d etection- 1 Refer to table 2 D - - - E - - - F - - - G - - - H - - - [0] A Dongle (for Printer/Scanner kit...
Page 67
![Page 67
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 31
2
2.2.2 Input check (Test mode 03) (e-STUDIO202L/232/2 82)
Note: Note:
Initialization is performed before the equipment en ters the test mode.
Fig. 2-3 Example of display during input check
Items to be checked and the condition of the equipm ent when the buttons [A] to [H] are highlighted are
listed in the following pages. The status of each input signal can be checked by p
ressing the [FAX] button,...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-66.png "Page 67
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 31
2
2.2.2 Input check (Test mode 03) (e-STUDIO202L/232/2 82)
Note: Note:
Initialization is performed before the equipment en ters the test mode.
Fig. 2-3 Example of display during input check
Items to be checked and the condition of the equipm ent when the buttons [A] to [H] are highlighted are
listed in the following pages. The status of each input signal can be checked by p
ressing the [FAX] button,...")
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 31 2 2.2.2 Input check (Test mode 03) (e-STUDIO202L/232/2 82) Note: Note: Initialization is performed before the equipment en ters the test mode. Fig. 2-3 Example of display during input check Items to be checked and the condition of the equipm ent when the buttons [A] to [H] are highlighted are listed in the following pages. The status of each input signal can be checked by p ressing the [FAX] button,...
Page 68
![Page 68
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 32
[FAX] button: OFF ([FAX] LED: OFF)
Digital key Button Items to check Contents
Highlighted display
e.g. Normal dis-
play
e.g.
[1] A -
- -
B LCF connection Not connected Connected
C Bypass unit connection Not connected Connected
D Bypass paper sensor No paper Paper present
E ADU connection Not connected Connected
F ADU opening/closing switch ADU opened ADU closed
G ADU exit sensor Paper present No paper
H...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-67.png "Page 68
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 32
[FAX] button: OFF ([FAX] LED: OFF)
Digital key Button Items to check Contents
Highlighted display
e.g. Normal dis-
play
e.g.
[1] A -
- -
B LCF connection Not connected Connected
C Bypass unit connection Not connected Connected
D Bypass paper sensor No paper Paper present
E ADU connection Not connected Connected
F ADU opening/closing switch ADU opened ADU closed
G ADU exit sensor Paper present No paper
H...")
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 32 [FAX] button: OFF ([FAX] LED: OFF) Digital key Button Items to check Contents Highlighted display e.g. Normal dis- play e.g. [1] A - - - B LCF connection Not connected Connected C Bypass unit connection Not connected Connected D Bypass paper sensor No paper Paper present E ADU connection Not connected Connected F ADU opening/closing switch ADU opened ADU closed G ADU exit sensor Paper present No paper H...
Page 69
![Page 69
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 33
2
[5] A LCF end fence home position sensor Fence home
positionOther than
home position
B LCF end fence stop position sensor Fence stop positionOther than
stop position
C LCF standby side empty sensor No paper Paper present
D LCF side cover opening/closing switch Cover closed C over opened
E LCF motor rotation status (Motor is rotating at ou tput mode
(03)) Abnormal rota-
tionNormal rota-
tion
F...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-68.png "Page 69
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 33
2
[5] A LCF end fence home position sensor Fence home
positionOther than
home position
B LCF end fence stop position sensor Fence stop positionOther than
stop position
C LCF standby side empty sensor No paper Paper present
D LCF side cover opening/closing switch Cover closed C over opened
E LCF motor rotation status (Motor is rotating at ou tput mode
(03)) Abnormal rota-
tionNormal rota-
tion
F...")
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 33 2 [5] A LCF end fence home position sensor Fence home positionOther than home position B LCF end fence stop position sensor Fence stop positionOther than stop position C LCF standby side empty sensor No paper Paper present D LCF side cover opening/closing switch Cover closed C over opened E LCF motor rotation status (Motor is rotating at ou tput mode (03)) Abnormal rota- tionNormal rota- tion F...
Page 70
![Page 70
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 34
Table 1. Relation between the status of the bypass paper width sensor and paper size (width).
[0]A -
- -
B - - -
C - - -
D Lower drawer detection switch Drawer not installedDrawer
present
E Lower drawer paper stock sensor Paper almost emptyPaper present
F - - -
G - - -
H - - -
Bypass paper-width sensor Paper-width size
2 1 0
1 1 1 A3/A4
1 1 0 B5-R
1 0 1 A5-R
1 0 0 A3/A4
0 1 1 Card size
0 1 0...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-69.png "Page 70
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 34
Table 1. Relation between the status of the bypass paper width sensor and paper size (width).
[0]A -
- -
B - - -
C - - -
D Lower drawer detection switch Drawer not installedDrawer
present
E Lower drawer paper stock sensor Paper almost emptyPaper present
F - - -
G - - -
H - - -
Bypass paper-width sensor Paper-width size
2 1 0
1 1 1 A3/A4
1 1 0 B5-R
1 0 1 A5-R
1 0 0 A3/A4
0 1 1 Card size
0 1 0...")
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 34 Table 1. Relation between the status of the bypass paper width sensor and paper size (width). [0]A - - - B - - - C - - - D Lower drawer detection switch Drawer not installedDrawer present E Lower drawer paper stock sensor Paper almost emptyPaper present F - - - G - - - H - - - Bypass paper-width sensor Paper-width size 2 1 0 1 1 1 A3/A4 1 1 0 B5-R 1 0 1 A5-R 1 0 0 A3/A4 0 1 1 Card size 0 1 0...