Toshiba Estudio 230 Manual

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 55
2
593 Image Gamma data  slope adjust- 
mentText/Photo PPC 0
SYS One’s place:
0: Equivalent to the set 
value 5 
1 to 9: Select the slope of 
Gamma curve (The  
larger the value is, the  
larger the slope 
becomes.) 
Ten’s place: 
0: Equivalent to the set  
value 5 
1 to 9: Select the slope of  
low density (The smaller  
the value is, the darker  
the background  
becomes.)
00: Use default value 1
594...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 56
667-0 Image Density adjustment of cop-
ied image PPC 0
  M Adjusts the density level 
of copied image. 
When the value  
decreases, the text 
becomes lighter. 4
667-1 PPC 4
  M 4
667-2 PPC 5
  M 4
667-3 PPC 6
  M 4
667-4 PPC 10
  M 4
672-0 Image Adjustment of  printer image 
densityNormal PRT 0
M Adjustment of the image 
density.
With decreasing the  
value, the text becomes  
lighter. 4
672-1 PRT 4
 M 4...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 57
2
700 Image Adjustment of  binarized  
threshold 
(Text)Center 
value
FAX 120
 SYS When the value 
increases, the image at  
the center step becomes  
lighter. 1
701 Light step  valueFAX 20
 SYS When the value 
increases, the image of  
“light” side becomes  
lighter. 1
702 Dark step  valueFAX 20
 SYS When the value 
increases, the image of  
“dark” side becomes  
darker. 1
710 Image Density  adjustment...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 58
825 Image Range correc-
tion on origi- 
nal manually  
set on the 
original glassText/Photo SCN 12
 SYS Sets whether the values 
of the background peak  
and text peak are fixed  
or not. One’s place is an 
adjustment for “auto- 
matic density” and ten’s  
place is for “manual den-
sity”. Once they are  
fixed, the range correc- 
tion is performed with 
standard values. The  
values of the background...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 59
2
850 Image Density  adjustment 
Fine adjust- 
ment of “man-
ual density”/ 
Light step  
valueText/Photo SCN 20
SYS When the value 
increases, the image of  
the “light” steps becomes  
lighter. 1
851 Text SCN 20 SYS 1
852 Photo SCN 20 SYS 1
855 Image Density  adjustment 
Fine adjust- 
ment of “man-
ual density”/ 
Dark step  
valueText/Photo SCN 20
SYS When the value 
increases, the image of  
the “dark”...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 60
913 Image Range correc-
tion on origi- 
nal manually  
set on the 
original glassCustom 
Mode 1
PPC EUR:12
UC:12
JPN:22
 SYS Set whether the values 
of the background peak  
and text peak are fixed  
or not. Ones place is an 
adjustment for “auto- 
matic density” and tens  
place is for “manual den-
sity”. Once they are  
fixed, the range correc- 
tion is performed with 
standard values. The  
values of...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 61
2
922 Image Sharpness  adjustmentCustom  
Mode 1PPC 1
 SYS When the value 
increases, the image  
becomes sharper. When  
the value decreases, the 
image becomes softer.  
The smaller the value is,  
the less the moire  
becomes. 
Ones place: Fixed value  
(05-922 is “1”, 05-923 is  
“5”, 05-924 is “2”) 
Ten’s place: Adjustable  
from 0 to 9 regarding the  
default value as the stan- 
dard (The larger the...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 62
943 Image Gamma data 
slope adjust- 
mentCustom  
Mode 1
PPC 0
 SYS One’s place:
0: Equivalent to the set  
value 5 
1 to 9: Select the slope of 
Gamma curve (The  
larger the value is, the  
larger the slope 
becomes.) 
Ten’s place: 
0: Equivalent to the set  
value 5 
1 to 9: Select the slope of  
low density (The smaller  
the value is, the darker  
the background  
becomes.)
00: Use default value 1...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 63
2
2.2.6 Adjustment mode (05) (e-STUDIO202L/232/282)
Procedure 1 
Procedure 2 
Procedure 3 
Procedure 4 Items in the adjustment mode list in the following 
pages can be corrected or changed in the adjust-
ment mode (05). Turn ON the power with pressing the  digital keys [0] and [5] simultaneously in 
order to enter this mode.
[0][5]
[POWER] [POWER]
OFF/ON
(Exit)[Digital key] (Code) [START]
[CANCEL]...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 64
Procedure 6 
* When the automatic adjustment ends abnormally, err or message is displayed.
Procedure 7 
* When the automatic adjustment ends abnormally, err or message is displayed.
Procedure 10 
Procedure 17
* When the “storing is not performed within 2 minute s after pressing the [START] button at the 
manual adjustment, the “automatic adjustment” start s automatically.
Note: Note: 
The fuser roller...