Toshiba Estudio 230 Manual

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 75
2
593 Image Gamma data  slope adjust- 
mentText/Photo PPC 0
SYS One’s place:
0: Equivalent to the set 
value 5 
1 to 9: Select the slope of 
Gamma curve (The  
larger the value is, the  
larger the slope 
becomes.) 
Ten’s place: 
0: Equivalent to the set  
value 5 
1 to 9: Select the slope of  
low density (The smaller  
the value is, the darker  
the background  
becomes.)
00: Use default value 1
594...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 76
620 Image Sharpness 
adjustmentText/Photo PPC EUR: 1
UC: 1
JPN: 0
 SYS When the value 
increases, the image  
becomes sharper. When  
the value decreases, the 
image becomes softer.  
The smaller the value is,  
the less the moire 
becomes. 
One’s place: Fixed value  
(05-620 is “1”, 05-621 is  
“2”, 05-622 is “5”)  
Ten’s place: Adjustable  
from 0 to 9 regarding the  
default value as the stan- 
dard...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 77
2
672-0 Image Adjustment of  printer image  
densityNormal PRT 0
M Adjustment of the image 
density.
With decreasing the  
value, the text becomes 
lighter. 4
672-1 PRT 4
 M 4
672-2 PRT 5
 M 4
672-3 PRT 6
 M 4
672-4 PRT 10
 M 4
676-0 Toner sav- ingPRT 0
 M 4
676-1 PRT 2
 M 4
676-2 PRT 3
 M 4
676-3 PRT 4
 M 4
676-4 PRT 5
 M 4
693 Image Range correc- tion on origi- 
nal set on the  
RADFText/Photo PPC...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 78
710 Image Density 
adjustment 
Fine adjust- 
ment of “man-
ual density”/ 
Center valuePhoto FAX 128
SYS When the value 
increases, the image at 
the center step becomes  
darker. 1
714 Text/Photo FAX 128 SYS 1
715 Image Density  adjustment
Fine adjust- 
ment of “man- 
ual density”/
Light step  
valuePhoto FAX 20
SYS When the value 
increases, the image of  
the “light” steps becomes  
lighter. 1
719...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 79
2
830 Image Range correc- tion on origi- 
nal set on the  
RADFText/Photo SCN 12
 SYS Sets whether the value 
of the background peak  
and text peak are fixed  
or not. One’s place is an 
adjustment for “auto- 
matic density” and ten’s  
place is for “manual den-
sity”. Once they are  
fixed, the range correc- 
tion is performed with 
standard values. 
The values of the back- 
ground peak and text  
peak...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 80
865-0 Image Sharpness 
adjustment 
(Text/Photo)Reproduc- 
tion ratio  
40% or  
smallerSCN 1
 SYS When the value 
increases, the image  
becomes sharper. When  
the value decreases, the 
image becomes softer.  
The smaller the value is,  
the less the moire 
becomes. 
Ones place: Fixed value  
(05-865 is “1”, 05-866 is  
“2”, 05-867 is “5”) 
Tens place: Sharpness  
intensity (0: Use default  
value, 1-9:...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 81
2
916 Image Range correc- tion on origi- 
nal set on the  
RADFCustom 
Mode 1
PPC EUR:12
UC:12
JPN:22
 SYS Set whether the values 
of the background peak  
and text peak are fixed  
or not. Ones place is an  
adjustment for “auto- 
matic density” and tens  
place is for “manual den-
sity”. Once they are  
fixed, the range correc- 
tion is performed with 
standard values. The  
values of the background...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 82
931 Image Density 
adjustment 
Fine adjust- 
ment of “man-
ual density”/ 
Center valueCustom  
Mode 1
PPC 128
 SYS When the value 
increases, the image of  
the center step becomes  
darker. 1
932 Custom  Mode 2PPC 128
 SYS 1
933 Custom  Mode 3PPC 128
 SYS 1
934 Image Density  adjustment 
Fine adjust- 
ment of “man-
ual density”/ 
Light step  
valueCustom 
Mode 1
PPC 20
 SYS When the value 
increases, the...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 83
2
2.2.7 Setting mode (08) (e-STUDIO200L/230/280)
Procedure 1 
* Press [FUNCTION CLEAR] to enter minus (-). 
Procedure 2 
Procedure 3 
Procedure 4 
* Press [FUNCTION CLEAR] to enter minus (-). 
Procedure 5 
* Press [HELP] to enter “-”.
The items in the setting code list can be set or ch anged in this setting mode (08).
(Stores value in RAM)
[0][8]
[POWER] [POWER] OFF/ON
(Exit)
[Digital key](Code) [START]...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 84
Procedure 7 
Procedure 9 
Procedure 10 
Procedure 11 and 12 
*1.  Press [MONITOR/PAUSE] to enter “-”, when enteri ng telephone number.
*2.  The data are stored in SYS-RAM in procedure 11  and stored in NIC-RAM in procedure 12.
Procedure 14
[0][8]
[POWER] [POWER] OFF/ON
(Exit)
[Digital key]
(Code)[Digital key]
(Setting)
[CLEAR]
(Corrects value)
[START](HDD formatting)
[CANCEL]
[ENTER]
or
[INTERRUPT]...