Toshiba Estudio 230 Manual

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 105
2
437 Fuser Fuser roller temperature  during printing 
(Center thermistor /Thick  
paper 2) ALL 8
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C 
4: 160°C 5: 165°C 
6: 170°C 7: 175°C
8: 180°C 9: 185°C 
10: 190°C 
11: 195°C
12: 200°C 
13: 205°C 
14: 210°C 1
438 Fuser Fuser roller temperature  during printing 
(Center thermistor/OHP  
film) ALL 8
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C 
4: 160°C 5: 165°C 
6: 170°C...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 106
448 Fuser Fuser roller temperature in 
Energy Saving Mode 
(Side thermistor) ALL 0
 M 0: OFF 1: 40°C
2: 50°C 3: 60°C
4: 70°C 5: 80°C 
6: 90°C 7: 100°C
8: 110°C 9: 120°C 
10: 130°C 
11: 140°C
12: 150°C 
13: 160°C 1
450 Fuser Fuser roller temperature  during printing 
(Side thermistor/Plain  
paper) ALL 8
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C 
4: 160°C 5: 165°C 
6: 170°C 7: 175°C 
8: 180°C 9: 185°C
10:...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 107
2
462 RADF Setting for switchback  operation to copy mixed- 
sized original on RADF ALL 0
 SYS Sets whether or not 
detecting the original 
length by transporting  
without scanning in 
reverse when finding  
A4-R/FOLIO paper. 
0: Invalid- Judges as A4-R without trans- 
porting in reverse  
with no scanning.
1: Valid- Judges  whether it is A4-R or  
FOLIO size by  
transporting in  
reverse with no...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 108
477 General Machine identification 
information ALL Refer to 
content M 
Lower drawer refer- 
ence: 0 
Upper drawer refer-
ence: 1 2
478 Laser Judged number of polygo- nal motor rotation error 
(Normal rotation) ALL 0
 M Displays the error 
[CA10] when the set  
number of rotation error 
has been detected. 
0: 2 times 1: 12 times 1
479 Laser Judged number of polygo- nal motor rotation error 
(At...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 109
2
483 Laser Pre-running rotation of  polygonal motor ALL 0
 SYS Sets whether or not 
switching the polygonal  
motor from the standby  
rotation to the normal 
rotation when the origi- 
nal is set on the RADF  
or the platen cover is  
opened. 
0: Valid (when using RADF and the origi- 
nal is set manually)
1: Invalid 
2: Valid (when using 
RADF only) 1
484 Laser Polygonal motor rotational  status...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 110
491 Transfer Transfer charger bias cor-
rection (H) at duplexing ALL 149
 M Corrects the transfer 
charger bias output  
value of the leading  
edge area of paper at 
duplexing. 1
492 Transfer Transfer charger bias cor- rection (C) at duplexing ALL 139
 M Corrects the transfer 
charger bias output  
value of the center area  
of paper at duplexing. 1
493 Transfer Transfer charger bias cor- rection (L) at...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 111
2
518 Fuser Fuser roller temperature  during printing 
(Side thermistor/Thick  
paper 3) ALL 9
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C 
4: 160°C 5: 165°C 
6: 170°C 7: 175°C
8: 180°C 9: 185°C 
10: 190°C 
11: 195°C
12: 200°C 
13: 205°C 
14: 210°C 1
520 Fuser Fuser roller temperature  during printing 
(Center thermistor/Enve- 
lope) ALL 9
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C 
4: 160°C 5: 165°C 
6: 170°C 7:...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 112
526 Fuser Pre-running time for first 
printing (OHP film) ALL 0
 M 0: Invalid 1: 0 sec.
2: 2 sec. 3: 3 sec. 
4: 4 sec. 5: 5 sec. 
6: 6 sec. 7: 7 sec.
8: 8 sec. 9: 9 sec. 
10: 10 sec. 
11: 12 sec. 
12: 14 sec. 
13: 16 sec. 
14: 18 sec. 
15: 20 sec. 1
527-0 Fuser Temperature  drop switching 
time setting 
during printing 
(Side ther- 
mistor)The first  
drop
ALL 20
 M This code is valid only 
when “20” is...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 113
2
550 Image Default setting of original  mode PPC 0
 SYS 0: Text/Photo
1: Photo 2: Text 
3: Custom Mode 1
601 User  interface Setting for the Energy Sav- 
ing Mode ALL 0
 SYS 0:  Auto Shut Off Mode
1:  Sleep Mode 1
602 User  interface Screen setting for Auto 
power Save Mode and  
Auto Shut OFF Mode ALL EUR: 0
UC: 1
JPN: 1
 SYS 0: OFF 1: ON 1
603 User  interface Setting for automatic  
duplexing mode PPC...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 114
615 General Size information of main 
memory and page memory ALL - SYS Displays the sizes of 
the main memory and  
page memory. Enables  
to check if each mem-
ory is properly recog- 
nized. 2
617 User  interface Print setting without  
department code ALL 0
 SYS 0: Printed
1: Not printed 1
618 User  interface Default setting when mixed  
size originals are set on  
RADF PPC 0
 SYS 0: Scanned as all in...